Evaluation of defect induced surface heterogeneity in Metal-Organic Framework materials with alkali dopants employing adsorption isotherm modelling

Henninger, 2009, MOFs as adsorbents for low temperature heating and cooling applications, J. Am. Chem. Soc., 131, 2776, 10.1021/ja808444z Xia, 2020, Adsorption characteristics and cooling/heating performance of COF-5, Applied Thermal Engineering, Appl. Therm. Eng., 176, 10.1016/j.applthermaleng.2020.115442 Shabir, 2020, Recent updates on the adsorption capacities of adsorbent-adsorbate pairs for heat transformation applications, Renew. Sustain. Energy Rev., 119, 10.1016/j.rser.2019.109630 Fan, 2016, Adsorption cooling cycles: insights into carbon dioxide adsorption on activated carbons, Energy, 102, 491, 10.1016/j.energy.2016.02.112 Yao, 2014, Study on the performance of silica gel dehumidification system with ultrasonic-assisted regeneration, Energy, 66, 799, 10.1016/j.energy.2014.01.061 Kabeel, 2009, Adsorption–desorption operations of multilayer desiccant packed bed for dehumidification applications, Renew. Energy, 34, 255, 10.1016/j.renene.2008.04.011 Ng, 2013, Desalination, Adsorption desalination: an emerging low-cost thermal desalination method, Desalination, 308, 161, 10.1016/j.desal.2012.07.030 He, 2014, Methane storage in metal-organic frameworks, Chem. Soc. Rev., 43, 5657, 10.1039/C4CS00032C Lin, 2017, Metal-organic frameworks for carbon dioxide capture and methane storage, Adv. Energy Mater., 7, 10.1002/aenm.201601296 Kayal, 2018, Activated carbon (type Maxsorb-III) and MIL-101(Cr) metal organic framework based composite adsorbent for higher CH4 storage and CO2 capture, Chem. Eng. J., 334, 780, 10.1016/j.cej.2017.10.080 Han, 2007, Lithium-doped metal-organic frameworks for reversible H2 storage at ambient temperature, J. Am. Chem. Soc., 129, 8422, 10.1021/ja072599+ Mavrandonakis, 2008, Why Li doping in MOFs enhances H2 storage capacity? A multi-scale theoretical study, J. Phys. Chem. C, 112, 7290, 10.1021/jp7102098 Himsl, 2009, Improving the hydrogen-adsorption properties of a hydroxy-modified MIL-53(Al) structural analogue by lithium doping, Angew. Chem. Int. Ed., 48, 4639, 10.1002/anie.200806203 Dinari, 2015, Fabrication and characterization of novel highly transparent and organo-soluble poly (ether imide) thin film for gas separation, New J. Chem., 39, 4478, 10.1039/C4NJ02105C Fakhar, 2020, Elucidating the effect of chain extenders substituted by aliphatic side chains on morphology and gas separation of polyurethanes, Eur. Polym. J., 122, 10.1016/j.eurpolymj.2019.109346 Dinari, 2015, Novel and processable polyimides with a N-benzonitrile side chain: thermal, mechanical and gas separation properties, RSC Adv., 5, 26040, 10.1039/C4RA17030J Fakhar, 2019, Association of hard segments in gas separation through polyurethane members with aromatic bulky chain extenders, J. Mem. Sci., 574, 134, 10.1016/j.memsci.2018.12.062 Li, 2021, Adsorption of antimony using amino-functionalized magnetic MIL-101(Cr): optimization by response surface methodology, J. Indian Chem. Soc., 98, 10.1016/j.jics.2021.100204 Xu, 2020, Efficient solar-driven water harvesting from arid air with metal–organic frameworks modified by hygroscopic salt, Angew. Chem. Int. Ed., 59, 5202, 10.1002/anie.201915170 Zhu, 2020, Efficient CO2 capture from ambient air with amine-functionalized Mg–Al mixed metal oxides, J. Mater. Chem., 8, 16421, 10.1039/D0TA05079B Zhang, 2009, Interactions of hydrogen molecules with metal-organic frameworks at adsorption sites, Chem. Phys. Lett., 469, 261, 10.1016/j.cplett.2009.01.003 Fakhar, 2020, Enhanced CO2 capture through bulky poly (urethane-urea)-based MMMs containing hyperbranched triazine based silica nanoparticles, Separ. Purif. Technol., 241, 10.1016/j.seppur.2020.116734 Rodriguez-Reinoso, 1987, A standard adsorption isotherm for the characterization of activated carbons, J. Phys. Chem., 91, 515, 10.1021/j100287a006 Pirngruber, 2009, Amines immobilized on a solid support for postcombustion CO2 capture–A preliminary analysis of the performance in a VSA or TSA process based on the adsorption isotherms and kinetic data, Energy Proc., 1, 1335, 10.1016/j.egypro.2009.01.175 Teo, 2017, Evaluation of CH4 and CO2 adsorption on HKUST-1 and MIL-101(Cr) MOFs employing Monte Carlo simulation and comparison with experimental data, Appl. Therm. Eng., 110, 891, 10.1016/j.applthermaleng.2016.08.126 Furukawa, 2015, Heterogeneity within order in metal-organic frameworks, Angew. Chem. Int. Ed., 54, 3417, 10.1002/anie.201410252 Ng, 2017, A universal isotherm model to capture adsorption uptake and energy distribution of porous heterogeneous surface, Sci. Rep., 7, 10.1038/s41598-017-11156-6 Hönicke, 2018, Balancing mechanical stability and ultrahigh porosity in crystalline framework materials, Angew. Chem. Int. Ed., 57, 13780, 10.1002/anie.201808240 Férey, 2005, A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area, Science, 309, 2040, 10.1126/science.1116275 Farha, 2012, Designing higher surface area metal–organic frameworks: are triple bonds better than phenyls?, J. Am. Chem. Soc., 134, 9860, 10.1021/ja302623w Das, 2021, Recent developments in the adsorptive removal of heavy metal ions using metal-organic frameworks and graphene-based adsorbents, J. Indian Chem. Soc., 98, 10.1016/j.jics.2021.100188 Anahidzade, 2019, Enhancement of hydroxide conduction by incorporation of metal-organic frameworks into a semi-interpenetrating network, Energy Fuel., 33, 5749, 10.1021/acs.energyfuels.9b00650 Dinari, 2021, Preparation of MIL-101-NH2 MOF/triazine based covalent organic framework hybrid and its application in acid blue 9 removals, Polymer, 215, 10.1016/j.polymer.2021.123383 Anahidzade, 2018, Metal Organic framework anchored sulfonated poly (ether sulfone) as a high temperature proton exchange membrane for fuel cell, J. Membr. Sci., 565, 281, 10.1016/j.memsci.2018.08.037 Imanipoor, 2021, Adsorption and desorption of amoxicillin antibiotic from water matrices using an effective and recyclable MIL-53(Al) metal-organic framework adsorbent, J. Chem. Eng. Data, 66, 389, 10.1021/acs.jced.0c00736 Chowdhury, 2012, Adsorption of CO, CO2 and CH4 on Cu-BTC and MIL-101 metal organic frameworks: effect of open metal sites and adsorbate polarity, Microporous Mesoporous Mater., 152, 246, 10.1016/j.micromeso.2011.11.022 Kayal, 2015, Study of metal-organic framework MIL-101(Cr) for natural gas (methane) storage and compare with other MOFs (metal-organic frameworks), Energy, 91, 772, 10.1016/j.energy.2015.08.096 Sun, 2014, Study of HKUST (Copper benzene-1,3,5-tricarboxylate, Cu-BTC MOF)-1 metal organic frameworks for CH4 adsorption: an experimental Investigation with GCMC (grand canonical Monte-carlo) simulation, Energy, 76, 419, 10.1016/j.energy.2014.08.033 Kayal, 2016, Prediction of phase transitions by investigating CO2 adsorption on 1% lithium doped MIL-101 (Cr) MOF with anomalous type isosteric heat of adsorption, Microporous and Mesoporous Materials, Microporous Mesoporous Mater., 236, 21, 10.1016/j.micromeso.2016.08.020 Stasa, 2014, Methane diffusion in a porous environment, Defect Diffusion Forum, 353, 50, 10.4028/www.scientific.net/DDF.353.50 Peng, 2013, Methane storage in Metal−Organic frameworks: current records, Surprise Findings, and Challenges, 135, 11887 Simmons, 2011, Carbon capture in metal-organic frameworks-a comparative study, Energy Environ. Sci., 4, 2177, 10.1039/c0ee00700e Puziy, 1995, Heterogeneity of synthetic active carbons, Langmuir, 11, 543, 10.1021/la00002a030 Loh, 2010, Improved isotherm data for adsorption of methane on activated carbons, J. Chem. Eng. Data, 55, 2840, 10.1021/je901011c Bachmann, 2006, Determination of the adhesion energy of MEMS structures by applying Weibull-type distribution function, Sens. Actuators, A, 132, 407, 10.1016/j.sna.2006.04.003