Evaluation of Drying Rates of Lignite Particles in Superheated Steam Using Single-Particle Model
Tóm tắt
Drying rates of lignite particle groups in superheated steam are evaluated using a single-particle model developed for Australian lignite. Size distributions of the particles are assumed to obey the Rosin–Rammler equation with the maximum particle diameters defined as 100, 50, and 6 mm. The results show the drying rate of a lignite group depends strongly on the maximum particle size, and removal of large particles prior to drying is shown to be effective to reduce the drying time. The calculation model is available for simulations of drying behaviors of lignite in various dryers when an appropriate heat transfer coefficient is given. This study simulates the drying of particles smaller than 6 mm using a heat transfer coefficient in a fluidized bed dryer reported elsewhere. The required drying time estimated from the calculation is comparable to the processing time reported in an actual fluidized bed dryer, supporting the validity of the calculation model.
Tài liệu tham khảo
S.V. Jangam, M. Karthikeyan, A.S. Mujumdar, Dry. Technol. 29, 395–407 (2011)
A. Tahmasebi, J. Yu, Y. Han, H. Zhao, S. Battacharya, Asia-Pac. J. Chem. Eng. 8, 793–803 (2013)
D. Jeon, T. Kang, H. Kim, S. Lee, S. Kim, Sci. China 7, 1680–1683 (2011)
H.S. Kim, Y. Matsushita, M. Oomori, T. Harada, J. Miyawaki, S.H. Yoon, I. Mochida, Fuel 105, 415–424 (2013)
D. Stokie, M.W. Woo, S. Battacharya, Energy Fuels 27, 6598–6606 (2013)
K. Zhang, C. You, Energy Fuels 24, 6428–6436 (2010)
A.Y. Looi, K. Golonka, M. Rhodes, Chem. Eng. J. 87, 329–338 (2002)
Y. Komatsu, A. Sciazko, M. Zakrzewski, S. Kimijima, A. Hashimoto, S. Kaneko, J.S. Szmyd, Fuel Process. Technol. 131, 356–369 (2015)
A. Sciazko, Y. Komatsu, M. Zakrzewski, T. Akiyama, A. Hashimoto, N. Shikazono, S. Kaneko, S. Kimijima, J.S. Szmyd, Y. Kobayashi, Energies 9, 371–389 (2016)
J. Ewers, H.J. Klutz, W. Renzenbrink, G. Scheffknecht, VGB PowerTech 11, 60–65 (2003)
H.J. Klutz, C. Moser, D. Block, VGB PowerTech 11, 2–6 (2006)
T. Kiriyama, H. Sasaki, A. Hashimoto, S. Kaneko, M. Maeda, Mater. T. JIM 54, 1725–1734 (2013)
T. Kiriyama, H. Sasaki, A. Hashimoto, S. Kaneko, M. Maeda, Metal. Mater. Trans. E 1, 349–363 (2014)
J. Schmalfeld, C. Twigger, VDI Berichte 1280, 107–117 (1996)
J. Schmalfeld, L. Mckenzie, Chem. Eng. Aust. 18(3), 10–14 (1993)
C.J. Hamilton: in Institute of Engineers—Coal Handling and Utilization Conference—Australia, June 1990, pp. 184–87
H.J. Weiss and C.J. Hamilton: in Progress in Steam Fluidized Bed Drying, 7th Engineering Foundation Conference on Fluidization, Brisbane, May 3rd–8th, 1992
R. Yoshida, K. Ishida, T. Yoshida, S. Ueda, I. Sekiguchi, Y. Nakata, S. Yokoyama, T. Okutani, Y. Jomoto, Y. Yoshida, Fuel Process. Technol. 3, 1–5 (1980)
N.Y. Nsakala, R.H. Essenhigh, P.L. Walker Jr., Fuel 57, 605–611 (1978)
A.W. Scaroni, P.L. Walker Jr., R.H. Essenhigh, Fuel 60, 71–76 (1981)
D. Kunii and O. Levenspiel: Fluidization Engineering, Chap. 7, Wiley, New York, 1969, pp. 195–219.
JSME Data Book: Thermophysical Properties of Fluids, The Japan Society of Mechanical Engineers, Tokyo, 1983
Patent JP 2011-214817