Evaluating the effect of the protector cap for castable implant abutments on reverse tightening values

Bahat, 2000, Branemark system implants in the posterior maxilla: clinical study of 660 implants followed for 5 to 12 years, Int J Oral Maxillofac Implants, 15, 646 Byrne, 1998, The fit of cast and premachined implant abutments, J Prosthet Dent, 80, 184, 10.1016/S0022-3913(98)70108-8 Cibirka, 2001, Examination of the implant-abutment interface after fatigue testing, J Prosthet Dent, 85, 268, 10.1067/mpr.2001.114266 Kattadiyil, 1999, 352 Carr, 1996, Effects of fabrication, finishing, and polishing procedures on preload in prostheses using conventional “gold” and plastic cylinders, Int J Oral Maxillofac Implants, 11, 589 Jaggers, 1993, Abutment selection for anterior single tooth replacement. A clinical report, J Prosthet Dent, 69, 133, 10.1016/0022-3913(93)90128-B Cordioli, 1994, Single-tooth implant rehabilitation: a retrospective study of 67 implants, Int J Prosthodont, 7, 525 Bickford, 1981, 109 Goodacre, 2018, Prosthetic complications with implant prostheses (2001-2017), Eur J Oral Implantol, 11 Suppl 1, S27 Theoharidou, 2008, Abutment screw loosening in single-implant restorations: a systematic review, Int J Oral Maxillofac Implants, 23, 681 Long, 2017, Influence of implant abutment fabrication method on clinical outcomes: a systematic review, Eur J Oral Implantol, 10 Suppl 1, 67 2017, The glossary of prosthodontic terms. Ninth edition, J Prosthet Dent, 117, e1, 10.1016/j.prosdent.2016.12.001 Lewis, 1988, The “UCLA” abutment, Int J Oral Maxillofac Implants, 3, 183 Lewis, 1992, The UCLA abutment: a four-year review, J Prosthet Dent, 67, 509, 10.1016/0022-3913(92)90082-L Hurson, 2018, Implant/abutment biomechanics and material selection for predictable results, Compend Contin Educ Dent, 39, 440 Wadhwani, 2020, Protecting critical connection sites of a custom cast abutment with a protector cap during fabrication, J Prosthet Dent, 124, 144, 10.1016/j.prosdent.2019.08.024 Lee, 2015, Shear bond strength of porcelain to a new millable alloy and a conventional castable alloy, J Prosthet Dent, 113, 329, 10.1016/j.prosdent.2014.09.016 Wadhwani, 2012, An introduction to the implant crown with an esthetic adhesive margin (ICEAM), J Esthet Restor Dent, 24, 246, 10.1111/j.1708-8240.2011.00473.x Coskun, 2018, Airborne-particle abrasion; searching the right parameter, J Dent Sci, 13, 293 Johnson, 2006, Surface analysis of porcelain fused to metal systems, Dent Mater, 22, 330, 10.1016/j.dental.2005.05.003 Prasad, 2014, Accuracy of ringless casting and accelerated wax-elimination technique: a comparative in vitro study, J Prosthodont, 23, 157, 10.1111/jopr.12082 Dixon, 1995, Comparison of screw loosening, rotation, and deflection among three implant designs, J Prosthet Dent, 74, 270, 10.1016/S0022-3913(05)80134-9 ShigleyJE, 1986, 23 Bakaeen, 2001, The effect of implant diameter, restoration design, and occlusal table variations on screw loosening of posterior single-tooth implant restorations, J Oral Implantol, 27, 63, 10.1563/1548-1336(2001)027<0063:TEOIDR>2.3.CO;2 Breeding, 1993, Torque required to loosen single-tooth implant abutment screws before and after simulated function, Int J Prosthodont, 6, 435 Siamos, 2002, The relationship between implant preload and screw loosening on implant-supported prostheses, J Oral Implantol, 28, 67, 10.1563/1548-1336(2002)028<0067:TRBIPA>2.3.CO;2 Cerutti-Kopplin, 2014, Influence of reverse torque values in abutments with or without internal hexagon indexes, J Prosthet Dent, 112, 824, 10.1016/j.prosdent.2014.03.004 Kim, 2013, In vitro assessment of three types of zirconia implant abutments under static load, J Prosthet Dent, 109, 255, 10.1016/S0022-3913(13)60054-2 Rho JY, 1993, Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements, J Biomech, 26, 111, 10.1016/0021-9290(93)90042-D Kano, 2006, Effect of casting procedures on screw loosening in UCLA-type abutments, J Prosthodont, 15, 77, 10.1111/j.1532-849X.2006.00078.x Junqueira, 2013, Screw loosening of different UCLA-type abutments after mechanical cycling, Braz J Oral Sci, 12, 228, 10.1590/S1677-32252013000300014 Binon, 2000, The external hexagonal interface and screwjoint stability: a primer on threaded fasteners in implant dentistry, Quintessence Dent Technol, 23, 91 Haack, 1995, Elongation and preload stress in dental implant abutment screws, Int J Oral Maxillofac Implants, 10, 529 Schulte, 1997, Comparison of screw retention of nine abutment systems: a pilot study, Implant Dent, 6, 2831, 10.1097/00008505-199700610-00006 Binon, 1996, The effect of implant/abutment hexagonal misfit on screw joint stability, Int J Prosthodont, 9, 149