Evaluación tribológica de recubrimientos de nbc y VC sobre acero AISI D2 producidos por la técnica deposición difusión termo-reactiva

Arai T. Thermo reactive deposition diffusion process, en: Heat treating, 10a, ed., volumen 4, Materials Park, OH: ASM International Handbook, 1991, pp. 448. Arai, 1979, Carbide coating process by use of molten borax bath in japan, J. Heat Treat., 18, 15, 10.1007/BF02833234 Castillejo, 2011, Electrical furnace for producing carbide coatings using the thermoreactive deposition/diffusion technique, Dyna, 78, 192 Castillejo, 2014, Estudio de recubrimientos de carburos ternarios de niobio-vanadio producidos sobre acero d2 usando la técnica de deposición por difusión termorreactiva Revista LatinAm, Metal. Mat., 34, 230 Chu, 2008, Mechanical and tribological properties of nanostructured TiN/TiBN multilayer films, Wear, 265, 516, 10.1016/j.wear.2007.11.021 Holmberg, 1998, Coatings tribology contact, Mechanisms and Surface Design, 31, 107 Niels, 2004, Hall–Petch relation and boundary strengthening, Scr. Mater, 51, 801, 10.1016/j.scriptamat.2004.06.002 Oliveira, 2006, Evaluation of hard coatings obtained on AISI D2 steel by thermoreactive deposition treatment, Surface & Coatings Technology, 201, 1880, 10.1016/j.surfcoat.2006.03.036 Oliveira, 2006, Micro-abrasive wear test of niobium carbide layers produced on AISI H13 y M2 steels, Surface and Coatings Technology, 200, 5140, 10.1016/j.surfcoat.2005.05.037 Oliveira, 2005, Formation of carbide layers on AISI H13 y D2 steels by treatment in molten borax containing dissolved both Fe-Nb and Fe-Ti powders, Materials Letters, 59, 1719, 10.1016/j.matlet.2005.01.052 Oliver, 1992, An inproved technique for determining hardness and elastic modulus using load and displacement sensing identation experiments, J. Mater Res., 7, 1564, 10.1557/JMR.1992.1564 Paunovic M., Schlesinger M. Procesamiento de materiales integrales, Nueva York, John Wiley & Sons, USA, 1999. Peter A., De Paula J . Physical Chemistry, 9ª ed., parte 1, capítulo 4, Nueva York, W.H. Freeman and Company, 2012. Saduman, 2005, A study on kinetics of CrxC-coated high-chromium steel by thermo-reactive diffusion technique, Vacuum, 79, 63, 10.1016/j.vacuum.2005.01.009 Saduman, 2005, The Growth Kinetics of Borides Formed on Boronized AISI 4140, Vacuum, 77, 195, 10.1016/j.vacuum.2004.09.005 Sen, 2007, Characterization of niobium carbonitride on AISI D2, steel Materials Science Forum, 554, 213, 10.4028/www.scientific.net/MSF.554.213 Sen, 2004, Kinetics of niobium carbide coating produced on AISI 1040 steel by thermo-reactive deposition technique, Materials Chemistry and Physics, 86, 189, 10.1016/j.matchemphys.2004.03.002 Sen, 2005, Friction and wear properties of thermo-reactive diffusion coatings against titanium nitride coated steels, Materials and Design, 26, 167, 10.1016/j.matdes.2004.05.010 Sen, 2008, Sliding wear behavior of niobium carbide coated AISI 1040 steel, Wear, 264, 219, 10.1016/j.wear.2007.03.006 Sen, 2005, Wear properties of niobium carbide coatings performed by pack method on AISI 1040 steel, Thin Solid Films, 483, 152, 10.1016/j.tsf.2005.01.008 Trava-Airoldi, 2007, DLC film properties obtained by a low cost and modified pulsed-DC discharge, Thin Solid Films, 516, 272, 10.1016/j.tsf.2007.06.100 Zhiwei, 2009, Journal of Alloys and Compounds, 468, 58, 10.1016/j.jallcom.2007.12.089 Patiphan J. y Prasonk S. Influence of reducer on coating of steel with vanadium carbide by TD process, Department of Metallurgical Engineering, Chulalongkom University, Bangkok,Thailand.