Estimation of rock mass deformation modulus and strength of jointed hard rock masses using the GSI system

Hoek, 1995

Deere, 1968, Geological consideration

Bieniawski ZT, Rock mass classification in rock engineering. In: Bieniawski ZT, editor. Exploration for rock engineering, Proceedings of the Symposium, vol. 1. Rotterdam: Balkema, 1976. p. 97–106.

Barton, 1974, Engineering classification of rock masses for the design of tunnel support, Rock Mech, 6, 189, 10.1007/BF01239496

Barton, 2002, Some new Q-value correlations to assist in site characterisation and tunnel design, Int J Rock Mech Min Sci, 39, 185, 10.1016/S1365-1609(02)00011-4

Hoek, 1998, Applicability of the geological strength index (GSI) classification for very weak and sheared rock masses The case of Athens Schist Formation, Bull Eng Geol Env, 57, 151, 10.1007/s100640050031

Palmstrøm, 1996, Characterizing rock masses by the RMi for use in practical rock engineering, Part 1, Tunnelling Underground Space Technol, 11, 175, 10.1016/0886-7798(96)00015-6

Palmstrøm, 1996, Characterizing rock masses by the RMi for use in practical rock engineering, Part 2, Tunnelling and Underground Space Technol, 11, 287, 10.1016/0886-7798(96)00028-4

Laubscher, 1990, A geomechanics classification system for the rating of rock mass in mine design, J South Afr Inst Min Metall, 90, 257

Kendorski FS, Cummings RA, Bieniawski ZT, Skinner EH. Rock mass classification for block caving mine drift support. In: Proceedings of the Fifth ISRM, B, Melbourne, Australia, 1983. p. 51–63.

Potvin Y. Empirical open stope design in Canada. PhD thesis, Department of Mining and Mineral Processing, University of British Columbia, 1988.

Tanaka, 1964

Yoshinaka R, Sakurai S, Kikuchi K. Rock mass classification and its application. Japanese Civil Engineering Organization, Tokyo, 1989. p. 20–31.

Kikuchi K, Sato N. On the geomechical evaluation of the stability of dam foundations. Large dams 1982;102.

Windsor CR, Thompson AG, Chitombo GP. Excavation engineering—the integration of excavation, blast and reinforcement design. In: Proceedings of the EXPLO’95, Brisbane, Australia, 1995.

Hoek E, Brown ET. The Hoek–Brown failure criterion—a 1988 update. In: Curran JC, editor. Rock engineering for underground excavations. Proceedings of the 15th Canadian Rock Mechanics Symposium, Toronto, Canada, 1988. p. 31–8.

Hoek E. Rock engineering, Course note by Evert Hoek, 1997.

Hoek, 1997, Practical estimates of rock mass strength, Int J Rock Mech Min Sci, 34, 1165, 10.1016/S1365-1609(97)80069-X

Hoek, 1980

Hoek E, Carranza_Torres C, Corkum B. Hoek–Brown failure criterion—2002 edition. In: Proceedings of the Fifth North American Rock Mechanics Symposium, Toronto, Canada, vol. 1, 2002. p. 267–73.

Pelli, 1991, An interpretation of ground movements recorded during construction of the Donkin–Morien tunnel, Canad Geotech J, 28, 239, 10.1139/t91-030

Martin, 1999, Hoek–Brown parameters for predicting the depth of brittle failure around tunnels, Canad Geotech J, 36, 136, 10.1139/t98-072

Marinos P, Hoek E. GSI: a geologically friendly tool for rock mass strength estimation. In: GeoEng2000, Melbourne, Australia, 2000, CD-ROM.

Palmstrøm A, The volumetric joint count—a usefull and simple measure of the degree of jointing. In: Proceedings of the Fourth International Congress IAEG, New Delhi, vol. V, 1982. p. 221–8.

Diederichs, 1999, Tensile strength and abutment relaxation as failure control mechanisms in underground excavations, Int J Rock Mech Min Sci Geomech Abstr, 36, 69, 10.1016/S0148-9062(98)00179-X

Cai, 1992, A constitutive model of highly jointed rock masses, Mech Mater, 13, 217, 10.1016/0167-6636(92)90004-W

Palmstrøm A. RMi—a rock mass characterization system for rock engineering purposes. PhD thesis, University of Oslo, Norway, 1995.

Barton NR, Bandis SC. Review of predictive capability of JRC-JCS model in engineering practice. In: Barton NR, Stephansson O, editors. Rock joints, Proceedings of the International Symposium on Rock Joints. Rotterdam: Balkema, 1990. p. 603–10.

Barton N. The influence of joint properties in modeling jointed rock masses. Keynote lecture. In: Ninth ISRM, Tokyo, 1995.

Maejima T, Morioka H, Mori T, Aoki K. Evaluation of the loosened zone on excavation of the large underground rock cavern. In: Adachi, et al., editors. Modern tunnel science and technology, Kyoto, Japan, A.A. Balkema, 2001. p. 1033–8.

Rosenblueth, 1981, Two-point estimates in probabilities, J Appl Math Modelling, 5, 329, 10.1016/S0307-904X(81)80054-6

Koyama, 1997, Large-scale cavern at a depth of 500m, Tunnel Underground, 28, 37

Priest, 1976, Discontinuity spacings in rock, Int J Rock Mech Min Sci Geomech Abstr, 13, 135, 10.1016/0148-9062(76)90818-4

Kaiser PK. Observational modeling approach for design of underground excavations. In: Proceedings of the International Workshop on Observational Method of Construction of Large Underground Caverns in Difficult Ground Conditions, Tokyo, 1995. p. 1–17.