Erosive–corrosive wear of aluminum alloy composites: Influence of slurry composition and speed

Rawal, 2001, Metal matrix composites for space applications, JOM, 53, 14, 10.1007/s11837-001-0139-z Miracle, 2001, Aeronautical applications of metal matrix composites, JOM, 53, 12 Miracle, 2000, vol. 21, 1043 Hunt, 2000, vol. 21 Nicholas, 1995, An approach to fatigue life modeling in titanium-matrix composites, Mater. Sci. Eng. A, 200, 29, 10.1016/0921-5093(95)07002-8 Zahavi, 1978, 226 Aylor, 1985, Effect of reinforcement on the pitting behavior of Al base MMCs, J. Electrochem. Soc., 132, 1277, 10.1149/1.2114101 Rohatgi, 1992, Friction and wear of metal matrix composites, vol. 18 Lloyd, 1994, Particulate reinforced aluminum and magnesium composites, Int. Mater. Rev., 39, 1, 10.1179/imr.1994.39.1.1 Nair, 1985, SiC reinforced aluminum matrix composites, Int. Met. Rev, 30, 273, 10.1179/imr.1985.30.1.275 Rohatgi, 1986, Solidification structures and properties of cast metal ceramic particle composites, Int. Met. Rev., 31, 115, 10.1179/imr.1986.31.1.115 Asthana, 1998 Alman, 2000, Properties of metal matrix composites, vol. 21, 838 Rohatgi, 2000, Aqueous corrosion of metal matrix composites, vol. 3, 481 Hihara, 1994, Corrosion of metal matrix composites, Int. Mater. Rev., 39, 245, 10.1179/imr.1994.39.6.245 Feng, 1998, Pitting behavior of SiC/2024 Al matrix composites, J. Mater. Sci., 33, 5637, 10.1023/A:1004476501524 Delius, 1996, Abrasive wear of al composites—a review, Wear, 201, 132, 10.1016/S0043-1648(96)07228-6 Meyer Rodenback, 1990, Wear, 140, 331, 10.1016/0043-1648(90)90093-P Bester, 1993, The performance of Al alloys and particle reinforced Al matrix composites in erosive–corrosive slurry environments, Wear, 162–164, 57, 10.1016/0043-1648(93)90484-4 Turenne, 1989, The effect of sand concentration on the erosion of the materials by slurry jet, Wear, 133, 95, 10.1016/0043-1648(89)90116-6 Hutchings, 2000, Wear of aluminium based composites, vol. 3, 501 Tomilson, 1994, Cavitation erosion of aluminium alloy matrix/ceramic composites, J. Mater. Sci. Lett., 13, 170, 10.1007/BF00278151 Modi, 1999, Erosion corrosion characteristic of squeeze cast Aluminium alloy/SiC composites in water and sodium chloride solution cotaining sand, Mater. Sci. Technol., 15, 933, 10.1179/026708399101506607 Saxena, 1993, Erosion corrosion characteristic of aluminium alloy–alumina fiber composites, Wear, 169, 119, 10.1016/0043-1648(93)90397-5 Modi, 1992, Dry sliding wear of squeeze cast aluminium alloy/SiC composites, Mater. Sci. Eng., A151, 235, 10.1016/0921-5093(92)90212-J Prasad, 2000, Effect of alumina particle dispersion on the erosive corrosive wear response of a Zn based alloy under changing slurry condition and distance, Wear, 238, 151, 10.1016/S0043-1648(99)00356-7 Das, 1999, Influence of experimental parameters on the erosive corrosive wear of aluminium–SiC particle composites, Wear, 231, 195, 10.1016/S0043-1648(99)00106-4 Das, 1999, Mechanism of material removal during erosion corrosion of Al–SiC particle composites, Wear, 236, 295, 10.1016/S0043-1648(99)00289-6 Mondal, 1998, Study of erosive corrosive wear characteristic ofan Al alloy composites through factorial design experiments, Wear, 217, 1, 10.1016/S0043-1648(98)00174-4 Turenne, 1990, The effect of abrasive particle size on the slurry erosion resistance of particulate reinforced aluminium alloy composites, Wear, 141, 147, 10.1016/0043-1648(90)90199-K Wang, 1989, Two-body abrasive wear of alumina fiber–aluminium matrix composite, Mater. Sci. Technol., 5, 71, 10.1179/mst.1989.5.1.71 Caron, 1989, 424 Gundersen, 1990, Cathodic protection of aluminium in sea water, Corrosion, 46, 279, 10.5006/1.3585103 Evans, 1971, Corros. Sci., 11, 6, 10.1016/S0010-938X(71)80057-4 Brunn, 1991, 257 Hihara, 1992, Galvanic corrosion of Al matrix composites, Corrosion, 48, 546, 10.5006/1.3315972 Yu, 1991, Spray atomized and codeposited 6061 aluminium–SiCp composites, J. Met., 43, 16 Trazaskoma, 1990, Pit morphology of Al alloy and SiC/Al alloy metal matrix composites, Corrosion, 46, 402, 10.5006/1.3585124 Milosev, 1991, J. Electrchem. Soc., 138, 6, 10.1149/1.2085579 Muller, 1977, Pitting potential of high purity binary Al alloys–Al–Cu alloys, Corros. Sci., 17, 179, 10.1016/0010-938X(77)90044-0 J.R. Davis (Ed.), ASM Specialty Handbook—Aluminum and Aluminum alloys ASM international, 1993, p. 579. ASTM Standard Designation: G119-93 “ Standard Guide for Determining Synergism Between Wear and Corrosion” ASTM Standards, vol. 3.02, 1993, p. 139. Saraswathi, 2001, A comparative study of corrosion behavior of Al–SiCp composites with cast iron, Corrosion, 57, 643, 10.5006/1.3290391 Bertolini, 1999, Corrosion behaviour of particulate metal matrix composites, Corrosion, 55, 422, 10.5006/1.3284003