Erosion wear of CrN, TiN, CrAlN, and TiAlN PVD nitride coatings

Prengel, 1998, State of the art in hard coatings for carbide cutting tools, Surf Coat Technol, 102, 183, 10.1016/S0257-8972(96)03061-7

Klocke, 1999, Coated too1s for metal cutting features and applications, Ann CIRP, 48, 515, 10.1016/S0007-8506(07)63231-4

Kalss, 2006, Modern coatings in high performance cutting applications, Int J Refract Metals Hard Mater, 24, 399, 10.1016/j.ijrmhm.2005.11.005

Ducros, 2003, Deposition, characterization and machining performance of multilayer PVD coatings on cemented carbide cutting tools, Surf Coat Technol, 163–164, 681, 10.1016/S0257-8972(02)00656-4

Uhlmann, 2000, Wear behavior of HFCVD-diamond coated carbide and ceramic tools, Surf Coat Technol, 131, 395, 10.1016/S0257-8972(00)00855-0

Renevier, 2000, Performance of MoS2/metal composite coatings used for dry machining and other industrial applications, Surf Coat Technol, 123, 84, 10.1016/S0257-8972(99)00424-7

Ezugwu, 2001, Tool life and wear mechanisms of TiN coated tools in an intermittent cutting operation, J Mater Proc Technol, 116, 10, 10.1016/S0924-0136(01)00852-4

Soković, 1998, On the inter-relationships of some machinability parameters in finish machining with cermet TiN (PVD) coated tools, J Mater Proc Technol, 78, 163, 10.1016/S0924-0136(97)00479-2

Deng, 2008, Friction and wear behaviors of the PVD ZrN coated carbide in sliding wear tests and in machining processes, Wear, 264, 298, 10.1016/j.wear.2007.03.014

Fenske, 1989, Nitride and carbide coatings for high speed steel cutting tools, Trib Trans, 32, 339, 10.1080/10402008908981898

Sahin, 2004, The effect of Al2O3, TiN and Ti (C, N) based CVD coatings on tool wear in machining metal matrix composites, Surf Coat Technol, 179, 349, 10.1016/S0257-8972(03)00802-8

Jindal, 1999, Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning, Int J Refract Metals Hard Mater, 17, 163, 10.1016/S0263-4368(99)00008-6

Harris, 2003, Influence of chromium content on the dry machining performance of cathodic arc evaporated TiAlN coatings, Wear, 254, 185, 10.1016/S0043-1648(02)00290-9

Horling, 2005, Mechanical properties and machining performance of Ti1−xAlxN coated cutting tools, Surf Coat Technol, 191, 384, 10.1016/j.surfcoat.2004.04.056

Barshilia, 2005, Structure, hardness and thermal stability of TiAlN and nanolayered TiAlN/CrN multilayer films, Vacuum, 77, 169, 10.1016/j.vacuum.2004.08.020

Panjan, 1999, Oxidation behaviour of TiAlN coatings sputtered at low temperature, Vacuum, 53, 127, 10.1016/S0042-207X(98)00407-2

Kim, 1997, Anti-oxidation properties of TiAlN film prepared by plasma-assisted chemical vapor deposition and roles of Al, Thin Solid Films, 307, 113, 10.1016/S0040-6090(97)00212-5

Spain, 2005, Characterisation and applications of CrAlN coatings, Surf Coat Technol, 200, 1507, 10.1016/j.surfcoat.2005.08.086

Wang, 2008, Material transfer phenomena and failure mechanisms of a nanostructured CrAlN coating in laboratory wear tests and an industrial punch tool application, Surf Coat Technol, 203, 816, 10.1016/j.surfcoat.2008.05.045

Wood, 1999, The sand erosion performance of coatings, Mater Des, 20, 179, 10.1016/S0261-3069(99)00024-2

Iwai, 2006, Evaluation of erosive wear resistance of TiN coatings by a slurry jet impact test, Wear, 261, 112, 10.1016/j.wear.2005.09.030

Mann, 2000, High-energy particle impact wear resistance of hard coatings and their application in hydroturbines, Wear, 237, 140, 10.1016/S0043-1648(99)00310-5

Antonov, 2009, Assessment of gradient and nanogradient PVD coatings behaviour under erosive, abrasive and impact wear conditions, Wear, 267, 898, 10.1016/j.wear.2008.12.045

Iwai, 2009, Micro-slurry-jet erosion (MSE) testing of CVD TiC/TiN and TiC coatings, Wear, 267, 264, 10.1016/j.wear.2009.02.014

Lawn, 1980, Elastic/plastic indentation damage in ceramics: the median/radial crack system, J Am Ceram Soc, 63, 574, 10.1111/j.1151-2916.1980.tb10768.x

Buijs, 1994, Erosion of glass as modeled by indentation theory, J Am Ceram Soc, 77, 1678

Deng, 2005, Erosion wear of boron carbide nozzles by abrasive air-jets, Mater Sci Eng A, 408, 227, 10.1016/j.msea.2005.07.029

Marshall, 1982, Elastic/plastic indentation damage in ceramics: the lateral crack system, J Am Ceram Soc, 65, 561, 10.1111/j.1151-2916.1982.tb10782.x

Wood, 1999, Sand erosion performance of CVD boron carbide coated tungsten carbide, Wear, 233–235, 134, 10.1016/S0043-1648(99)00230-6

Musil, 2000, Hard and superhard nanocomposite coatings, Surf Coat Technol, 125, 322, 10.1016/S0257-8972(99)00586-1

Shtansky, 2010, Multicomponent nanostructured films for various tribological applications, Int J Refract Metals Hard Mater, 28, 32, 10.1016/j.ijrmhm.2009.07.014