Enzyme-assisted mechanical production of microfibrillated cellulose from Northern Bleached Softwood Kraft pulp
Tóm tắt
This paper examines the mechanism of an enzyme pre-treatment on mechanical preparation of microfibrillated cellulose (MFC), the effects of hemicellulase and cellulase, on enhancing of the PFI refining efficiency of Northern Bleached Softwood Kraft pulp for fiber’s devillicate, and changing of morphologies and physical characteristics on fibers, such as specific surface area were investigated, respectively. It was revealed that the enzyme pre-treatment could promote (1) an acceleration of fine productivity from the fibers, (2) intensive reduction of the size of the fibers through mechanical cutting and (or) fibrillation, and (3) energy efficiency in the reduction of fiber length without productivity impairment. However, distinct mechanical actions on the fibers pre-treated with hemicellulase and cellulase were indicated, according to the dissimilar fibrillation patterns and morphological properties found in the MFC product through intensive mechanical refining.
Tài liệu tham khảo
Ankerfors M (2012) Microfibrillated cellulose: energy-efficient preparation techniques and key properties. Dissertation, KTH Royal Institute of Technology
Bajpai PK (2011) Emerging applications of enzymes for energy saving ln pulp and paper industry. Ippta J 23:181–186
Chen N, Zhu JY, Tong Z (2016) Fabrication of microfibrillated cellulose gel from waste pulp sludge via mild maceration combined with mechanical shearing. Cellulose 23:2573–2583. doi:10.1007/s10570-016-0959-1
Chinga-Carrasco G (2011) Cellulose fibres, nanofibrils and microfibrils: the morphological sequence of MFC components from a plant physiology and fibre technology point of view. Nanoscale Res Lett 6:417
Cosgrove DJ (2005) Growth of the plant cell wall. Nat Rev Mol Cell Biol 6:850–861
Espinosa E, Domínguez-Robles J, Sánchez R, Tarrés Q, Rodríguez A (2017) The effect of pre-treatment on the production of lignocellulosic nanofibers and their application as a reinforcing agent in paper. Cellulose. doi:10.1007/s10570-017-1281-2
Fu J et al (2016) A flexible solid-state electrolyte for wide-scale integration of rechargeable zinc-air batteries. Energy Environ Sci 9:663–670. doi:10.1039/C5EE03404C
Garcia-Ubasart J, Torres AL, Vila C, Pastor FIJ, Vidal T (2013) Biomodification of cellulose flax fibers by a new cellulase. Ind Crop Prod 44:71–76. doi:10.1016/j.indcrop.2012.10.019
Henriksson G, Teeri T (2009) Biotechnology in the forest industry. In: Ek M, Gellerstedt G, Henriksson G (eds) Wood chemistry and biotechnology. Walter de Gruyter GmbH &Co. KG, Berlin, pp 273–300
Henriksson M, Henriksson G, Berglund LA, Lindstrom T (2007) An environmentally friendly method for enzyme-assisted preparation of microfibrillated cellulose (MFC) nanofibers. Eur Polym J 43:3434–3441. doi:10.1016/j.eurpolymj.2007.05.038
Henriksson M, Berglund LA, Isaksson P, Lindstrom T, Nishino T (2008) Cellulose nanopaper structures of high toughness. Biomacromolecules 9:1579–1585. doi:10.1021/bm800038n
Isogai A, Saito T, Fukuzumi H (2011) TEMPO-oxidized cellulose nanofibers. Nanoscale 3:71–85. doi:10.1039/c0nr00583e
Janardhnan S, Sain M (2011) Isolation of cellulose nanofibers: effect of biotreatment on hydrogen bonding network in wood fibers. Int J of Polym Sci 2011:6. doi:10.1155/2011/279610
Klemm D, Kramer F, Moritz S, Lindström T, Ankerfors M, Gray D, Dorris A (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem Int Edn 50:5438–5466
Kumar D, Murthy GS (2013) Stochastic molecular model of enzymatic hydrolysis of cellulose for ethanol production. Biotechnol Biofuels 6:63. doi:10.1186/1754-6834-6-63
Lavoine N, Desloges I, Dufresne A, Bras J (2012) Microfibrillated cellulose—its barrier properties and applications in cellulosic materials: a review. Carbohydr Polym 90:735–764. doi:10.1016/j.carbpol.2012.05.026
Liu N, Qin Menghua, Gao Y, Li Z, Fu Y, Xu Q (2012) Pulp properties and fiber characteristics of xylanase-treated Aspen APMP. BioResources 7:3367–3377
Lumiainen J (2000) Refining of chemical pulp. In: Paulapuro H (ed) Papermaking science and technology book 8: papermaking part 1, stock preparation and wet end, 1st edn. Fapet Oy, Helsinki, pp 87–122
Morgado J, Cavaco-Paulo A, Rousselle MA (2000) Enzyme pre-treatment of lyocell-clarification of depilling mechanisms. Text Res J 70:696–699
Nakagaito AN, Yano H (2004) The effect of morphological changes from pulp fiber towards nano-scale fibrillated cellulose on the mechanical properties of high-strength plant fiber based composites. Appl Phys A 78:547–552. doi:10.1007/s00339-003-2453-5
Oksanen T, Pere J, Buchert J, Viikari L (1997) The effect of trichoderma reesei cellulases and hemicellulases on the paper technical properties of never-dried bleached kraft pulp. Cellulose 4:329–339. doi:10.1023/A:1018456411031
Osong SH, Norgren S, Engstrand P (2016) Processing of wood-based microfibrillated cellulose and nanofibrillated cellulose, and applications relating to papermaking: a review. Cellulose 23:93–123. doi:10.1007/s10570-015-0798-5
Ougiya H, Hioki N, Watanabe K, Morinaga Y, Yoshinaga F, Samejima M (1998) Relationship between the physical properties and surface area of cellulose derived from adsorbates of various molecular sizes. Biosci Biotechnol Biochem 62:1880–1884. doi:10.1271/bbb.62.1880
Paakko M et al (2007) Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromolecules 8:1934–1941. doi:10.1021/bm061215p
Paakko M et al (2008) Long and entangled native cellulose I nanofibers allow flexible aerogels and hierarchically porous templates for functionalities. Soft Matter 4:2492–2499. doi:10.1039/b810371b
Perez J, Munoz-Dorado J, de la Rubia T, Martinez J (2002) Biodegradation and biological treatments of cellulose, hemicellulose and lignin: an overview. Int Microbiol 5:53–63
Przybysz Buzała K, Przybysz P, Kalinowska H, Derkowska M (2016) Effect of cellulases and xylanases on refining process and kraft pulp properties. PLoS One 11:e0161575. doi:10.1371/journal.pone.0161575
Qing Y, Sabo R, Zhu JY, Agarwal U, Cai Z, Wu Y (2013) A comparative study of cellulose nanofibrils disintegrated via multiple processing approaches. Carbohydr Polym 97:226–234. doi:10.1016/j.carbpol.2013.04.086
Saito T, Kimura S, Nishiyama Y, Isogai A (2007) Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose. Biomacromolecules 8:2485–2491
Sarkar P, Manfred A (2016) Organization of the plant cell wall. In: Ray JR (ed) Molecular cell biology of the growth and differentiation of plant cells. CRC Press, Boca Raton, pp 101–119
Scheller HV, Ulvskov P (2010) Hemicelluloses. Annu Rev Plant Biol 61(1):263–289
Shallom D, Shoham Y (2003) Microbial hemicellulases. Curr Opin Microbiol 6(3):219–228
Shatkin JA, Wegne TH, Bilek EMT, Cowie J (2014) Market projections of cellulose nanomaterial-enabled products—Part 1: applications. Tappi J 13:9–16
Silveira RL, Stoyanov SR, Gusarov S, Skaf MS, Kovalenko A (2013) Plant biomass recalcitrance: effect of hemicellulose composition on nanoscale forces that control cell wall strength. J Am Chem Soc 135:19048–19051. doi:10.1021/ja405634k
Siro I, Plackett D (2010) Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 17:459–494. doi:10.1007/s10570-010-9405-y
Spence K, Venditti R, Rojas O, Habibi Y, Pawlak J (2011) A comparative study of energy consumption and physical properties of microfibrillated cellulose produced by different processing methods. Cellulose 18:1097–1111. doi:10.1007/s10570-011-9533-z
Technical Association of the Pulp and Paper Industry (2008) Laboratory beating of pulp (PFI mill method), Test Method T 248 sp-08. TAPPI, Peachtree Corners
Vanholme R, Demedts B, Morreel K, Ralph J, Boerjan W (2010) Lignin biosynthesis and structure. Plant Physiol 153(3):895–905
Zhu JY, Sabo R, Luo X (2011) Integrated production of nano-fibrillated cellulose and cellulosic biofuel (ethanol) by enzymatic fractionation of wood fibers. Green Chem 13:1339–1344. doi:10.1039/c1gc15103g