Environmentally benign electroless nickel plating using supercritical carbon-dioxide on hydrophilically modified acrylonitrile–butadiene–styrene

Grundmeier, 2005, Adhesion and de-adhesion mechanisms at polymer/metal interfaces: mechanistic understanding based on in situ studies of buried interfaces, Annu. Rev. Mater. Res., 35, 571, 10.1146/annurev.matsci.34.012703.105111 Sacher, 1990, The present state of metallized polyimide, ACS Symp. Ser., 440, 1, 10.1021/bk-1990-0440.ch001 Rossnagel, 1998, Directional and ionized physical vapor deposition for microelectronics applications, J. Vac. Sci. Technol. B, 16, 2585, 10.1116/1.590242 Wang, 2013, A facile method of nickel electroless deposition on various neutral hydrophobic polymer surfaces, Appl. Surf. Sci., 283, 309, 10.1016/j.apsusc.2013.06.108 Woo, 2010, Impregnation of Ni–P metal into polymer substrate via catalyzation in Sc-CO2 and electroless plating in Sc-CO2 emulsion, Surf. Coat. Technol., 204, 1785, 10.1016/j.surfcoat.2009.11.010 Mallory, 1990, 1 Sudagar, 2013, Electroless nickel, alloy, composite and nano coatings. A critical review, J. Alloys Compd., 571, 183, 10.1016/j.jallcom.2013.03.107 Krulik, 1978, Electroless plating of plastics, J. Chem. Educ., 55, 361, 10.1021/ed055p361 Schlesinger, 2010, Electroless deposition of nickel, 447 Zhao, 2006, A new method of producing conductive aramid fibers using supercritical carbon dioxide, Surf. Coat. Technol., 201, 628, 10.1016/j.surfcoat.2005.12.021 Martinez, 2011, The effectiveness of thermal treatment for development of conductive metalized aramid fiber using supercritical fluid carbon dioxide—fiber–metal adhesive strength improvement, J. Supercrit. Fluids, 56, 322, 10.1016/j.supflu.2010.10.011 Adachi, 2009, Supercritical carbon dioxide assisted electroless plating on thermoplastic polymers, J. Supercrit. Fluids, 49, 265, 10.1016/j.supflu.2008.12.010 Erkey, 2009, Preparation of metallic supported nanoparticles and films using supercritical fluid deposition, J. Supercrit. Fluids, 47, 517, 10.1016/j.supflu.2008.10.019 Yoshida, 2003, Application of emulsion of dense carbon dioxide in electroplating solution with nonionic surfactants for nickel electroplating, Surf. Coat. Technol., 173, 285, 10.1016/S0257-8972(03)00734-5 Yan, 2004, The effects of dense carbon dioxide on nickel plating using emulsion of carbon dioxide in electroplating solution, Surf. Coat. Technol., 182, 329, 10.1016/j.surfcoat.2003.07.006 Woo, 2008, Metallization on polymer by catalyzation in supercritical CO2 and electroless plating in dense CO2 emulsion, Surf. Coat. Technol., 202, 3921, 10.1016/j.surfcoat.2008.01.037 Woo, 2009, Metallization on polymer via quantitatively controlled catalyzation in Sc–CO2 and electroless plating with Sc–CO2 emulsion for micro and nano-device, Microelectron. Eng., 86, 1179, 10.1016/j.mee.2008.11.096 Seshimo, 2009, Functionally graded Pd/γ-alumina composite membrane fabricated by electroless plating with emulsion of supercritical CO2, J. Membr. Sci., 342, 321, 10.1016/j.memsci.2009.07.007 Tengsuwan, 2012, Electroless nickel plating on polypropylene via hydrophilic modification and supercritical carbon dioxide Pd-complex infusion, J. Supercrit. Fluids, 69, 117, 10.1016/j.supflu.2012.06.002 Tengsuwan, 2014, Supercritical carbon dioxide-assisted electroless nickel plating on polypropylene—the effect of copolymer blend morphology on metal–polymer adhesion, J. Supercrit. Fluids, 85, 123, 10.1016/j.supflu.2013.11.012 Kim, 2007, Photocatalytic pretreatment of acrylonitrile–butadiene–styrene polymer for electroless plating, Scripta Mater., 56, 349, 10.1016/j.scriptamat.2006.11.030 Magallón-Cacho, 2011, Surface modification of acrylonitrile-butadiene-styrene (ABS) with heterogeneous photocatalysis (TiO2) for the substitution of the etching stage in the electroless process, Surf. Coat. Technol., 206, 1410, 10.1016/j.surfcoat.2011.09.005 Garcia, 2010, ABS polymer electroless plating through a one-step poly(acrylic acid) covalent grafting, ACS Appl. Mater. Interfaces, 2, 1177, 10.1021/am1000163 Kulich, 2002, Acrylonitrile–butadiene–styrene polymers Teixeira, 2005, Surface conditioning of ABS for metallization without the use of chromium baths, J. Mater. Process. Technol., 170, 37, 10.1016/j.jmatprotec.2005.04.075 Kisin, 2007, Chemical and structural changes at the ABS polymer–copper metal interface, Polym. Degrad. Stab., 92, 605, 10.1016/j.polymdegradstab.2007.01.001 Fu, 2011, Preparation and properties of poly(ether-ester-amide)/poly(acrylonitrile-co-butadiene-co-styrene) antistatic blends, J. Appl. Polym. Sci., 122, 12, 10.1002/app.33265 Yabuta, 2009, Development of antistatic polymer for polyolefin resins, Polym. Prepr., 58, 87 Greco, 1994, Polycarbonate/ABS blends: a literature review, Adv. Polym. Technol., 13, 249, 10.1002/adv.1994.060130401 Triacca, 1991, Reactive compatibilization of blends of nylon 6 and ABS materials, Polymer, 32, 1401, 10.1016/0032-3861(91)90420-N