Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand

Akçaözoğlu, S., Atiş, C.D., 2011. Effect of granulated blast furnace slag and fly ash addition on the strength properties of lightweight mortars containing waste PET aggregates. Construction and Building Materials, 25(10): 4052–4058. [doi: 10.1016/j.conbuildmat.2011.04.042 ]

Alengaram, U.J., Jumaat, M.Z., Mahmud, H., 2008a. Ductility behaviour of reinforced palm kernel shell concrete beams. European Journal of Scientific Research, 23(3): 406–420.

Alengaram, U.J., Jumaat, M.Z., Mahmud, H., 2008b. Influence of sand content and silica fume on mechanical properties of palm kernel shell concrete. International Conference in Construction, Building and Technology, Kuala Lumpur, Malaysia, p.251–262.

Alengaram, U.J., Mahmud, H., Jumaat, M.Z., et al., 2010. Effect of aggregate size and proportion on strength properties of palm kernel shell concrete. International Journal of the Physical Sciences, 5(12):1848–1856.

Alengaram, U.J., Mahmud, H., Jumaat, M.Z., 2011. Enhancement and prediction of modulus of elasticity of palm kernel shell concrete. Materials & Design, 32(4): 2143–2148. [doi: 10.1016/j.matdes.2010.11.035 ]

Alengaram, U.J., Al Muhit, B.A., Jumaat, M.Z., et al., 2013. A comparison of the thermal conductivity of oil palm shell foamed concrete with conventional materials. Materials & Design, 51:522–529. [doi: 10.1016/j.matdes.2013.04.078 ]

ASTM C127-12, 2012. Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate. ASTM International.

ASTM C128-12, 2012. Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate. ASTM International.

ASTM C469-02, 2002. Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression. ASTM International.

ASTM C597-09, 2009. Standard Test Method for Pulse Velocity through Concrete. ASTM International.

BS EN 1097-3:1998, 1998. Tests for Mechanical and Physical Properties of Aggregates. Determination of Loose Bulk Density and Voids. British Standards Institution.

BS EN 12390-3:2009, 2009. Testing Hardened Concrete. Compressive Strength of Test Specimens. British Standards Institution.

BS EN 12390-5:2009, 2009. Testing Hardened Concrete. Flexural Strength of Test Specimens. British Standards Institution.

BS EN 12390-6:2009, 2009. Testing Hardened Concrete. Tensile Splitting Strength of Test Specimens. British Standards Institution.

Bui, D.D., Hu, J., Stroeven, P., 2005. Particle size effect on the strength of rice husk ash blended gap-graded Portland cement concrete. Cement and Concrete Composites, 27(3):357–366. [doi: 10.1016/j.cemconcomp.2004.05.002 ]

Campione, G., Miraglia, N., Papia, M., 2001. Mechanical properties of steel fibre reinforced lightweight concrete with pumice stone or expanded clay aggregates. Materials and Structures, 34(4):201–210. [doi: 10.1007/BF02480589 ]

Chao-Lung, H., Anh-Tuan, B.L., Chun-Tsun, C., 2011. Effect of rice husk ash on the strength and durability characteristics of concrete. Construction and Building Materials, 25(9):3768–3772. [doi: 10.1016/j.conbuildmat.2011.04.009 ]

Chindaprasirt, P., Homwuttiwong, S., Jaturapitakkul, C., 2007. Strength and water permeability of concrete containing palm oil fuel ash and rice husk-bark ash. Construction and Building Materials, 21(7):1492–1499. [doi: 10.1016/j.conbuildmat.2006.06.015 ]

Cordeiro, G.C., Toledo Filho, R.D., Fairbairn, E.D.M.R., 2009. Use of ultrafine rice husk ash with high-carbon content as pozzolan in high performance concrete. Materials and Structures, 42(7):983–992. [doi: 10.1617/s11527-008-9437-z ]

Flower, D.J.M., Sanjayan, J.G., 2007. Green house gas emissions due to concrete manufacture. The International Journal of Life Cycle Assessment, 12(5):282–288. [doi: 10.1065/lca2007.05.327 ]

Ganesan, K., Rajagopal, K., Thangavel, K., 2008. Rice husk ash blended cement: assessment of optimal level of replacement for strength and permeability properties of concrete. Construction and Building Materials, 22(8): 1675–1683. [doi: 10.1016/j.conbuildmat.2007.06.011 ]

Jahren, P., Sui, T., 2013. Concrete and Sustainability. CRC Press, Boca Raton, Florida, USA. [doi: 10.1201/b15160 ]

Kılıç, A., Atiş, C.D., Yaşar, E., et al., 2003. High-strength lightweight concrete made with scoria aggregate containing mineral admixtures. Cement and Concrete Research, 33(10):1595–1599. [doi: 10.1016/S0008-8846(03)00131-5 ]

Leslie, J.R., Cheesman, W.J., 1949. An ultrasonic method of studying deterioration and cracking in concrete structures. Journal of the American Concrete Institute, 21(1): 17–36.

Liu, M.Y.J., Alengaram, U.J., Jumaat, M.Z., et al., 2014. Evaluation of thermal conductivity, mechanical and transport properties of lightweight aggregate foamed geopolymer concrete. Energy and Buildings, 72:238–245. [doi: 10.1016/j.enbuild.2013.12.029 ]

MS 522: Part 1:2003, 2003. Cement—Part 1: Compositions, Specifications and Conformity Criteria for Common Cements. Department of Standards Malaysia.

Mo, K.H., Yap, S.P., Alengaram, U.J., et al., 2014a. Impact resistance of hybrid fibre-reinforced oil palm shell concrete. Construction and Building Materials, 50:499–507. [doi: 10.1016/j.conbuildmat.2013.10.016 ]

Mo, K.H., Alengaram, U.J., Jumaat, M.Z., 2014b. Utilization of ground granulated blast furnace slag as partial cement replacement in lightweight oil palm shell concrete. Materials and Structures, in press. [doi: 10.1617/s11527-014-0336-1 ]

Nataraja, M.C., Nagaraj, T.S., Reddy, A., 2001. Proportioning concrete mixes with quarry wastes. Cement, Concrete and Aggregates, 23(2):81–87. [doi: 10.1520/CCA10479J ]

Neville, A.M., 1995. Properties of Concrete. Longman, London, UK.

Rodríguez de Sensale, G., 2006. Strength development of concrete with rice-husk ash. Cement and Concrete Composites, 28(2):158–160. [doi: 10.1016/j.cemconcomp.2005.09.005 ]

Safiuddin, M., West, J.S., Soudki, K.A., 2010. Hardened properties of self-consolidating high performance concrete including rice husk ash. Cement and Concrete Composites, 32(9):708–717. [doi: 10.1016/j.cemconcomp.2010.07.006 ]

Saouter, E., van Hoof, G., Pittinger, C.A., et al., 2001. The effect of compact formulations on the environmental profile of northern European granular laundry detergents. The International Journal of Life Cycle Assessment, 6(6): 363–372. [doi: 10.1007/BF02978867 ]

Shafigh, P., Jumaat, M.Z., Mahmud, H.B., et al., 2012. Lightweight concrete made from crushed oil palm shell: tensile strength and effect of initial curing on compressive strength. Construction and Building Materials, 27(1):252–258. [doi: 10.1016/j.conbuildmat.2011.07.051 ]

Shafigh, P., Jumaat, M.Z., Mahmud, H.B., et al., 2013. Oil palm shell lightweight concrete containing high volume ground granulated blast furnace slag. Construction and Building Materials, 40:231–238. [doi: 10.1016/j.conbuildmat.2012.10.007 ]

Shetty, M.S., 2005. Concrete Technology: Theory and Practice. S. Chand, India.

Yu, Q., Sawayama, K., Sugita, S., et al., 1999. The reaction between rice husk ash and Ca(OH)2 solution and the nature of its product. Cement and Concrete Research, 29(1):37–43. [doi: 10.1016/S0008-8846(98)00172-0 ]

Zhang, M.H., Lastra, R., Malhotra, V.M., 1996. Rice-husk ash paste and concrete: some aspects of hydration and the microstructure of the interfacial zone between the aggregate and paste. Cement and Concrete Research, 26(6):963–977. [doi: 10.1016/0008-8846(96)00061-0 ]