Enhancement of solid-phase thermal conductivity and specific heat of solar salt through addition of MWCNT: new observations and implications for thermal energy storage

Andreu-Cabedo P, Mondragon R, Hernandez L et al (2014) Increment of specific heat capacity of solar salt with SiO2 nanoparticles. Nanoscale Res Lett 9:582. https://doi.org/10.1186/1556-276X-9-582 Awad A, Burns A, Waleed M et al (2018) Latent and sensible energy storage enhancement of nano-nitrate molten salt. Sol Energy 172:191–197. https://doi.org/10.1016/j.solener.2018.04.012 Buongiorno J (2006) Convective transport in nanofluids. J Heat Transf 128:240. https://doi.org/10.1115/1.2150834 Cáceres G, Montané M, Nasirov S, O’Ryan R (2016) Review of thermal materials for CSP plants and LCOE evaluation for performance improvement using chilean strategic minerals: lithium salts and copper foams. Sustainability 8:106. https://doi.org/10.3390/su8020106 Chieruzzi M, Cerritelli GF, Miliozzi A, Kenny JM (2013) Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage. Nanoscale Res Lett 8:1–9. https://doi.org/10.1186/1556-276X-8-448 Chieruzzi M, Miliozzi A, Crescenzi T et al (2015) A new phase change material based on potassium nitrate with silica and alumina nanoparticles for thermal energy storage. Nanoscale Res Lett. https://doi.org/10.1186/s11671-015-0984-2 Christensen A, Norby P, Hanson JC, Shimada S (1996) Phase transition of KNO3 monitored by synchrotron X-ray powder diffraction. J Appl Crystallogr 29:265–269. https://doi.org/10.1107/S0021889895015664 Dudda B, Shin D (2013) Effect of nanoparticle dispersion on specific heat capacity of a binary nitrate salt eutectic for concentrated solar power applications. Int J Therm Sci 69:37–42. https://doi.org/10.1016/j.ijthermalsci.2013.02.003 González-Roubaud E, Pérez-Osorio D, Prieto C (2017) Review of commercial thermal energy storage in concentrated solar power plants: steam vs. molten salts. Renew Sustain Energy Rev 80:133–148. https://doi.org/10.1016/j.rser.2017.05.084 Guo Q, Wang T (2015) Study on preparation and thermal properties of sodium nitrate/silica composite as shape-stabilized phase change material. Thermochim Acta 613:66–70. https://doi.org/10.1016/J.TCA.2015.05.023 Hamdy E, Ebrahim S, Abulfotuh F, Soliman M (2017) Effect of multi-walled carbon nanotubes on thermal properties of nitrate molten salts. Proc 2016 Int Renew Sustain Energy Conf IRSEC 2016 317–320. https://doi.org/10.1109/irsec.2016.7983997 Hu Y, He Y, Zhang Z, Wen D (2017) Effect of Al2O3 nanoparticle dispersion on the specific heat capacity of a eutectic binary nitrate salt for solar power applications. Energy Convers Manag 142:366–373. https://doi.org/10.1016/j.enconman.2017.03.062 Khanafer K, Tavakkoli F, Vafai K, AlAmiri A (2015) A critical investigation of the anomalous behavior of molten salt-based nanofluids. Int Commun Heat Mass Transf 69:51–58. https://doi.org/10.1016/j.icheatmasstransfer.2015.10.002 Kibria MA, Anisur MR, Mahfuz MH et al (2015) A review on thermophysical properties of nanoparticle dispersed phase change materials. Energy Convers Manag 95:69–89. https://doi.org/10.1016/J.ENCONMAN.2015.02.028 Kim H, Jo B (2018) Anomalous increase in specific heat of binary molten salt-based graphite nanofluids for thermal energy storage. Appl Sci 8:1305. https://doi.org/10.3390/app8081305 Kingson Solomon Jeevaraj. A PM (2015) Synthesis and characterization of multi walled carbon nanotube nanofluids. Shodhganga: A Reservoir of Indian Theses. http://hdl.handle.net/10603/119268 Lachheb M, Adili A, Albouchi F et al (2016) Thermal properties improvement of Lithium nitrate/Graphite composite phase change materials. Appl Therm Eng 102:922–931. https://doi.org/10.1016/j.applthermaleng.2016.03.167 Lasfargues M, Bell A, Ding Y (2016) In situ production of titanium dioxide nanoparticles in molten salt phase for thermal energy storage and heat-transfer fluid applications. J Nanoparticle Res 18:150. https://doi.org/10.1007/s11051-016-3460-8 Lasfargues M, Geng Q, Cao H, Ding Y (2015) Mechanical dispersion of nanoparticles and its effect on the specific heat capacity of impure binary nitrate salt mixtures. Nanomaterials 5:1136–1146. https://doi.org/10.3390/nano5031136 Leijon M, Skoglund A, Waters R et al (2010) On the physics of power, energy and economics of renewable electric energy sources—Part I. Renew Energy 35:1729–1734. https://doi.org/10.1016/j.renene.2009.10.030 Luo Y, Du X, Awad A, Wen D (2017) Thermal energy storage enhancement of a binary molten salt via in-situ produced nanoparticles. Int J Heat Mass Transf 104:658–664. https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.004 Malhotra T (2001) Solar energy in India. Refocus 2:20–22. https://doi.org/10.1016/S1471-0846(01)80044-5 Mohamed SA, Al-Sulaiman FA, Ibrahim NI et al (2017) A review on current status and challenges of inorganic phase change materials for thermal energy storage systems. Renew Sustain Energy Rev 70:1072–1089. https://doi.org/10.1016/j.rser.2016.12.012 Mohammad MB, Brooks GA, Rhamdhani MA (2017) Thermal analysis of molten ternary lithium-sodium-potassium nitrates. Renew Energy 104:76–87. https://doi.org/10.1016/j.renene.2016.12.015 Muñoz-Sánchez B, Nieto-Maestre J, Iparraguirre-Torres I et al (2018) Molten salt-based nanofluids as efficient heat transfer and storage materials at high temperatures. An overview of the literature. Renew Sustain Energy Rev 82:3924–3945. https://doi.org/10.1016/j.rser.2017.10.080 Myers PD, Alam TE, Kamal R et al (2016) Nitrate salts doped with CuO nanoparticles for thermal energy storage with improved heat transfer. Appl Energy 165:225–233. https://doi.org/10.1016/j.apenergy.2015.11.045 Pfleger N, Bauer T, Martin C et al (2015) Thermal energy storage—overview and specific insight into nitrate salts for sensible and latent heat storage. Beilstein J Nanotechnol 6:1487–1497. https://doi.org/10.3762/bjnano.6.154 Salunkhe PB, D JK (2017) Investigations on latent heat storage materials for solar water and space heating applications. J Energy Storage 12:243–260. https://doi.org/10.1016/j.est.2017.05.008 Shao J, Darkwa J, Kokogiannakis G (2015) Review of phase change emulsions (PCMEs) and their applications in HVAC systems. Energy Build 94:200–217. https://doi.org/10.1016/j.enbuild.2015.03.003 Wei G, Wang G, Xu C et al (2018) Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: a review. Renew Sustain Energy Rev 81:1771–1786. https://doi.org/10.1016/j.rser.2017.05.271 Wei X, Yin Y, Qin B et al (2017) Thermal conductivity improvement of liquid nitrate and carbonate salts doped with MgO particles. Energy Procedia 142:407–412. https://doi.org/10.1016/j.egypro.2017.12.064 Wen R, Huang Z, Huang Y et al (2016) Synthesis and characterization of lauric acid/expanded vermiculite as form-stabilized thermal energy storage materials. Energy Build 116:677–683. https://doi.org/10.1016/j.enbuild.2016.01.023 Wu Y, Li J, Wang M et al (2018) Solar salt doped by MWCNTs as a promising high thermal conductivity material for CSP. RSC Adv 8:19251–19260. https://doi.org/10.1039/C8RA03019G Xie Q, Zhu Q, Li Y (2016) Thermal storage properties of molten nitrate salt-based nanofluids with graphene nanoplatelets. Nanoscale Res Lett 11:1–7. https://doi.org/10.1186/s11671-016-1519-1 Yang DJ, Zhang Q, Chen G et al (2002) Thermal conductivity of multiwalled carbon nanotubes. Phys Rev B 66:165440. https://doi.org/10.1103/PhysRevB.66.165440 Yang L, Xu X (2017) A renovated Hamilton–Crosser model for the effective thermal conductivity of CNTs nanofluids. Int Commun Heat Mass Transf 81:42–50. https://doi.org/10.1016/J.ICHEATMASSTRANSFER.2016.12.010 Zhang P, Ma F, Xiao X (2016) Thermal energy storage and retrieval characteristics of a molten-salt latent heat thermal energy storage system. Appl Energy 173:255–271. https://doi.org/10.1016/j.apenergy.2016.04.012