Enhancement of heat transfer in SAH with polygonal and trapezoidal shape of the rib using CFD

Verma, 2000, Investigation for the optimal thermohydraulic performance of artificially roughened solar air heaters, Renew Energy, 19, 10.1016/S0960-1481(99)00081-6 Saini, 2008, Development of correlations for Nusselt number and friction factor for solar air heater with roughened duct having arc-shaped wire as artificial roughness, Sol Energy, 1118, 10.1016/j.solener.2008.05.010 Bopche, 2009, Experimental investigations on heat transfer and frictional characteristics of a turbulator roughened solar air heater duct, Int Commun Heat Mass Tran, 2834, 10.1016/j.ijheatmasstransfer.2008.09.039 Saini, 2008, Heat transfer and friction factor correlations for a duct having dimple shape artificial roughness for solar air heaters, Energy, 1277, 10.1016/j.energy.2008.02.017 Kumar, 2009, Heat transfer and friction correlations for artificially roughened solar air heater duct with discrete W-shaped ribs, Energy Convers Manag, 2106, 10.1016/j.enconman.2009.01.025 Kumar, 2009, CFD based performance analysis of a solar air heater duct provided with artificial roughness, Renew Energy, 1285, 10.1016/j.renene.2008.09.015 Lanjewar, 2011, Heat transfer and friction in solar air heater duct with W-shaped rib roughness on absorber plate, Energy, 4531, 10.1016/j.energy.2011.03.054 Anil Singh, 2014, A numerical investigation of square-sectioned transverse rib roughened solar air heater, Int J Therm Sci, 111 Deep Singh, 2016, Performance evaluation of solar air heater with novel hyperbolic rib geometry, Renew Energy, 1161 Gill, 2016, Investigation on performance enhancement due to staggered piece in a broken arc rib roughened solar air heater duct, Renew Energy Vipin, 2016, Experimental and CFD investigation of convection heat transfer in solar air heater with reverse L-shaped ribs, Sol Energy, 275 Sharma, 2017, Experimental and numerical investigation of forced convective heat transfer in solar air heater with thin ribs, Sol Energy, 277, 10.1016/j.solener.2017.03.042 Mahanand, 2020, Thermal enhancement study of a transverse inverted-T shaped ribbed solar air heater, Int Commun Heat Mass Tran, 119, 10.1016/j.icheatmasstransfer.2020.104922 Arunkumar, 2020, Analysis of a solar air heater for augmented thermohydraulic performance using helicoidal spring shaped fins-A numerical study, Renew Energy, 297, 10.1016/j.renene.2020.06.098 Mahanand, 2021, Thermo-hydraulic performance analysis of a solar air heater (SAH) with quarter-circular ribs on the absorber plate: a comparative study, Int J Therm Sci, 10.1016/j.ijthermalsci.2020.106747 Nidhul, 2020, Enhanced thermo-hydraulic performance in a V-ribbed triangular duct solar air heater: CFD and exergy analysis, Energy, 10.1016/j.energy.2020.117448 Gupta, 1993, Heat and fluid flow in rectangular solar air heater ducts having transverse rib roughness on absorber plates, Sol Energy, 31, 10.1016/0038-092X(93)90039-Q Karwa, 2001, Thermo-hydraulic performance of solar air heaters having integral chamfered rib roughness on absorber plates, Energy, 161, 10.1016/S0360-5442(00)00062-1 Aharwal, 2009, Heat transfer and friction characteristics of solar air heater ducts having integral inclined discrete ribs on absorber plate, Int Commun Heat Mass Tran, 5970, 10.1016/j.ijheatmasstransfer.2009.05.032 Singh, 2012, Investigations on thermo-hydraulic performance due to flow-attack-angle in V-down rib with gap in a rectangular duct of solar air heater, Appl Energy, 907, 10.1016/j.apenergy.2011.11.090 Alam, 2016, Numerical study on thermal hydraulic performance improvement in solar air heater duct with semi ellipse shaped obstacles, Energy, 588, 10.1016/j.energy.2016.06.105 Sompol, 2017, Heat transfer augmentation in a solar air heater channel with combined winglets and wavy grooves on absorber plate, Appl Therm Eng, 268 Kumar, 2018, Investigation of heat transfer augmentation and friction factor in triangular duct solar air heater due to forward facing chamfered rectangular ribs: a CFD based analysis, Renew Energy, 824, 835 Qader, 2019, Numerical investigation of flow through inclined fins under the absorber plate of solar air heater, Renew Energy, 468, 10.1016/j.renene.2019.04.024 Karmare, 2007, Heat transfer and friction factor correlation for artificially roughened duct with metal grit ribs, Int Commun Heat Mass Tran, 4342, 10.1016/j.ijheatmasstransfer.2007.01.065 Wang, 2019, Performance of a new type of solar air collector with transparent-vacuum glass tube based on micro-heat pipe arrays, Energy, 16, 10.1016/j.energy.2019.04.059 Yadav, 2013, CFD (computational fluid dynamics) based heat transfer and fluid flow analysis of a solar air heater provided with circular transverse wire rib roughness on the absorber plate, Energy, 1127, 10.1016/j.energy.2013.03.066 Smith, 2009, Thermal characteristics of turbulent rib-grooved channel flows, Int Commun Heat Mass Tran, 705 Chaube, 2006, Analysis of heat transfer augmentation and flow characteristics due to rib roughness over absorber plate of a solar air heater, Renew Energy, 317, 10.1016/j.renene.2005.01.012 Kamali, 2008, The importance of rib shape effects on the local heat transfer and flow friction characteristics of square ducts with ribbed internal surfaces, Int Commun Heat Mass Tran, 1032, 10.1016/j.icheatmasstransfer.2008.04.012 Tanda, 2011, Performance of solar air heater ducts with different types of ribs on the absorber plate, Energy, 6651, 10.1016/j.energy.2011.08.043 Singh, 2015, CFD (computational fluid dynamics) investigation on Nusselt number and friction factor of solar air heater duct roughened with non-uniform cross-section transverse rib, Energy, 1 Al-Shamani, 2015, Enhancement heat transfer characteristics in the channel with Trapezoidal rib–groove using nanofluids, Case Stud Therm Eng, 48, 10.1016/j.csite.2014.12.003 Menasria, 2017, Numerical study of thermohydraulic performance of solar air heater duct equipped with novel continuous rectangular baffles with high aspect ratio, Energy, 593, 10.1016/j.energy.2017.05.002 Bagabir, 2013, Numerical study of turbulent periodic flow and heat transfer in a square channel with different ribs, J Appl Math Phys, 65 Kumar, 2014, Analysis of heat transfer and fluid flow in different shaped roughness elements on the absorber plate solar air heater duct, Energy Procedia, 2102, 10.1016/j.egypro.2014.10.176 Kant Ravi, 2016, Experimental investigation on performance of a double pass artificial roughened solar air heater duct having roughness elements of the combination of discrete multi V-shaped and staggered ribs, Energy, 507, 516 Pandey, 2016, Experimental investigation of heat transfer augmentation using multiple arcs with gap on absorber plate of solar air heater, Sol Energy, 314, 10.1016/j.solener.2016.05.007 Varshney, 2017, Performance prediction for solar air heater having rectangular sectioned tapered rib roughness using CFD, Therm Sci Eng Progress Dec, 122 Varun Kumar, 2018, A performance evaluation of solar air heater using different shape of ribs mounted in absorber plate -A Review, Energies, 11, 3104, 10.3390/en11113104 2003 Duffie, 1980 Webb, 1972, Application of rough surface to heat exchanger design, Int J Heat Mass Tran, 15, 1647, 10.1016/0017-9310(72)90095-6 McAdams, 1942