Enhancement of energy storage density achieved in Bi-modified SrTiO3 thin films by introducing a TiO2 layer

Palneedi, 2018, High-performance dielectric ceramic films for energy storage capacitors: progress and outlook, Adv. Funct. Mater., 28, 10.1002/adfm.201803665 Yuan, 2017, Relaxor ferroelectric 0.9BaTiO3-0.1Bi(Zn0.5Zr0.5)O3 ceramic capacitors with high energy density and temperature stable energy storage properties, J. Mater. Chem. C., 83, 9552, 10.1039/C7TC02478A Yao, 2017, Homogeneous/inhomogeneous-structured dielectrics and their energy-storage performances, Adv. Mater., 29, 10.1002/adma.201601727 Sun, 2017, Ultrahigh energy storage performance of lead-free oxide multilayer film capacitors via interface engineering, Adv. Mater., 29, 10.1002/adma.201604427 Zhang, 2015, Ultrahigh energy density of polymer nanocomposites containing BaTiO3@TiO2 nanofibers by atomicscale interface engineering, Adv. Mater., 27, 819, 10.1002/adma.201404101 Hu, 2017, Dielectric and energy storage properties of BaTiO3-Bi(Mg1/2Ti1/2)O3 ceramic: influence of glass addition and biasing electric field, Ceram. Int., 43, 35, 10.1016/j.ceramint.2016.08.005 Fan, 2018, Significantly enhanced energy storage density with superior thermal stability by optimizing Ba(Zr0.15Ti0.85)O3/Ba(Zr0.35Ti0.65)O3 multilayer structure, Nano Energy, 51, 539, 10.1016/j.nanoen.2018.07.007 Luo, 2014, Fabrication, characterization, properties and theoretical analysis of ceramic/PVDF composite flexible films with high dielectric constant and low dielectric loss, J. Mater. Chem. A, 2, 510, 10.1039/C3TA14107A Wu, 2013, Aromatic polythiourea dielectrics with ultrahigh breakdown field strength, low dielectric loss, and high electric energy density, Adv. Mater., 25, 1734, 10.1002/adma.201204072 Hu, 2018, High dielectric constant and energy density induced by the tunable TiO2 interfacial buffer layer in PVDF nanocomposite contained with core–shell structured TiO2@BaTiO3 nanoparticles, Appl. Surf. Sci., 441, 824, 10.1016/j.apsusc.2018.02.112 Zhang, 2016, Tunable BT@SiO2 core@shell filler reinforced polymer composite with high breakdown strength and release energy density, Compos. Part A Appl. Sci. Manuf., 85, 172, 10.1016/j.compositesa.2016.03.025 Zhou, 2017, Dielectric properties and thermal conductivity of core-shell structured Ni@NiO/poly(vinylidene fluoride) composites, J. Alloy. Compd., 693, 1, 10.1016/j.jallcom.2016.09.178 Wu, 2013, Aromatic polythiourea dielectrics with ultrahigh breakdown field strength, lowdielectric loss, and high electric energy density, Adv. Mater., 25, 1734, 10.1002/adma.201204072 Zou, 2016, Leakage current and dielectric breakdown in lanthanum doped amorphous aluminum oxide films prepared by sol-gel, Ceram. Int., 42, 4120, 10.1016/j.ceramint.2015.11.084 Chen, 2007, High capacitance-temperature sensitivity and “giant” dielectric constant in SrTiO3, Appl. Phys. Lett., 90 Chen, 1992, Dielectric properties and complex defect in Sr1−xBi2/3xTiO3 ceramics, J. Appl. Phys., 71, 4451, 10.1063/1.350787 Petrov, 1998, Improved SrTiO3 multilayers for microwave application: growth and properties, J. Appl. Phys., 84, 3134, 10.1063/1.368511 Joshi, 1993, Structural and electrical characteristics of SrTiO3 thin films for dynamic random access memory applications, J. Appl. Phys., 73, 7627, 10.1063/1.353960 Qi, 2018, Improved breakdown strength and energy storage density of a Ce doped strontium titanate core by silica shell coating, J. Mater. Chem. C, 6, 9130, 10.1039/C8TC03181A Hu, 2018, Surface modified BaTiO3 nanoparticles by titanate coupling agent induce significantly enhanced breakdown strength and larger energy density in PVDF nanocomposite, Compos. Sci. Technol., 156, 109, 10.1016/j.compscitech.2017.12.025 Wang, 2017, Enhanced energy storage density of Ba0.4Sr0.6TiO3 ceramics with additive of Bi2O3-B2O3-ZnO glass, Mater. Lett., 201, 203, 10.1016/j.matlet.2017.05.007 Yao, 2018, Leakage current and breakdown behavior of bismuth-doped amorphous strontium titanate thin film, Mater. Chem. Phys., 206, 48, 10.1016/j.matchemphys.2017.12.005 Okhay, 2010, Dielectric response of polycrystalline Sr1-1.5xBixTiO3 thin films under direct current bias, Appl. Phys. Lett., 97, 10.1063/1.3463472 Li, 2007, The influence of the thickness of TiO2 seeding layer on structural and electrical properties of Bi3.15Nd0.85Ti3O12 thin films, J. Phys. D Appl. Phys., 40, 3788, 10.1088/0022-3727/40/12/034 Wada, 2003, Preparation of nm-sized BaTiO3 particles using a new 2-step thermal decomposition of barium titanyl oxalate, J. Mater. Sci., 38, 2655, 10.1023/A:1024438703449 Arya, 2003, Synthesis, characterization and dielectric properties of nanometer-sized barium strontium titanates prepared by the polymeric citrate precursor method, J. Mater. Chem., 13, 415, 10.1039/b205087k Hosseini, 2015, Thermal infrared and microwave absorbing properties of SrTiO3/SrFe12O19/polyaniline nanocomposites, J. Alloy. Compd., 644, 423, 10.1016/j.jallcom.2015.05.099 Kosola, 2003, Effect of annealing in processing of strontium titanate thin films by ALD, Appl. Surf. Sci., 211, 102, 10.1016/S0169-4332(03)00175-2 Yao, 2016, Enhanced self-repairing capability of sol-gel derived SrTiO3/nano Al2O3 composite films, Appl. Phys. Lett., 109, 10.1063/1.4962127 Li, 2017, Enhancement of breakdown strength of SrTiO3/nano-SiO2 composite film prepared by sol-gel technology, Ceram. Int., 43, 3495, 10.1016/j.ceramint.2016.10.161 Diao, 2019, Significantly improved energy storage properties of sol-gel derived Mn-modified SrTiO3 thin films, Ceram. Int., 45, 11784, 10.1016/j.ceramint.2019.03.056 Liu, 2020, Dual interfacial modification via anodizing method for achieving enhanced breakdown strength in multi-layer anodized alumina/Sr0.85Bi0.1TiO3 films, J. Alloy. Compd., 817, 10.1016/j.jallcom.2019.152783 Peng, 2016, Dielectric breakdown characteristics of sol-gel derived SrTiO3 films, J. Mater. Sci. Mater. Electron., 27, 8100, 10.1007/s10854-016-4810-0 Diao, 2018, Enhanced recoverable energy storage density of Mn-doped Ba0.4Sr0.6TiO3 thin films prepared by spin-coating technique, J. Mater. Sci. Mater. Electron., 29, 5814, 10.1007/s10854-018-8553-y Yao, 2018, High-energy-density with polymer nanocomposites containing of SrTiO3 nanofibers for capacitor application, Compos. Part A, 109, 48, 10.1016/j.compositesa.2018.02.040 Zhang, 2021, Enhancement of recoverable energy density and efficiency of lead-free relaxor-ferroelectric BNT-based ceramics, Chem. Eng. J., 406, 10.1016/j.cej.2020.126818 Ye, 2021, Significantly improvement of comprehensive energy storage performances with lead-free relaxor ferroelectric ceramics for high-temperature capacitors applications, Acta Mater., 203, 10.1016/j.actamat.2020.116484