Enhanced thermal conductivity of polymer composites filled with hybrid filler

Procter P, Solc J. Improved thermal conductivity in microelectronic encapsulants. Dexter's technical paper 1999;February:1–8.

Pecht, 1995

Bujard, 1994, Thermal conductivity of molding compounds for plastic packaging, IEEE Trans Compon Hybrids Manuf Technol Part A, 17, 527, 10.1109/95.335037

Procter, 1991, Improved thermal conductivity in microelectronic encapsulants, IEEE Trans Compon Hybrids Manuf Technol, 14, 708, 10.1109/33.105121

Ishida, 1998, Very high thermal conductivity obtained by boron nitride-filled polybenzoxazine, Thermochim Acta, 320, 177, 10.1016/S0040-6031(98)00463-8

Bujard P. Thermal conductivity of boron nitride filled epoxy resins: temperature dependence and influence of sample preparation. In: Proceedings of the I-THERM 1988, Los Angeles, May 11–13; 1988. p. 41–9.

Bujard P, Ansermet J. Thermally conductive aluminium nitride-filled epoxy resin [for electronic packaging]. In: Proceedings of the SEMI-THERM 1989, San Diego, February 7–9; 1989. p. 126–30.

Berman, 1976

Bigg, 1986

Lee, 2005, Comparisons of thermal properties between inorganic filler and acid-treated multiwall nanotube/polymer composites, J Mater Sci, 40, 1259, 10.1007/s10853-005-6947-8

Milewski, 1987

Wechsler, 1992, The probe method for measurement of thermal conductivity, vol. 2, 281

Vozár, 1996, A computer-controlled apparatus for thermal conductivity measurement by the transient hot wire method, J Therm Anal, 46, 495, 10.1007/BF02135027

Mathis, 2000, Transient thermal conductivity measurements: comparison of destructive and nondestructive techniques, High Temp High Press, 32, 321, 10.1068/htwu289

Samuels, 2001, Orientation specific thermal properties of polyimide film, J Electron Packaging, 123, 273, 10.1115/1.1347986

Mathis N. Eliminating density and heat capacity requirement in transient thermal conductivity measurements. In: ANTEC 1999 proceedings, New York, May 3–6; 1999.

Xu, 2001, Thermally conducting aluminum nitride polymer–matrix composites, Compos Part A, 32, 1749, 10.1016/S1359-835X(01)00023-9

Park, M, et al. KIST report on the development of high performance package materials, 2002. Oxmat's MacroPac Manual; 2001.

Nielsen, 1973, Thermal conductivity of particulate-filled polymers, J Appl Polym Sci, 17, 3819, 10.1002/app.1973.070171224

Nielsen, 1974, Ind Eng Chem Fundam, 13, 17, 10.1021/i160049a004