Enhanced corrosion resistance and biocompatibility of biodegradable magnesium alloy modified by calcium phosphate/collagen coating
Tóm tắt
Từ khóa
Tài liệu tham khảo
Zhao, 2017, Current status on clinical applications of magnesium-based orthopaedic implants: a review from clinical translational perspective, Biomaterials, 112, 287, 10.1016/j.biomaterials.2016.10.017
Witte, 2010, The history of biodegradable magnesium implants: a review, Acta Biomater., 6, 1680, 10.1016/j.actbio.2010.02.028
Zhai, 2014, The effect of metallic magnesium degradation products on osteoclast-induced osteolysis and attenuation of NF-kB and NFATc1 signaling, Biomaterials, 35, 6299, 10.1016/j.biomaterials.2014.04.044
Wagener, 2016, Cell adhesion on surface-functionalized magnesium, ACS Appl. Mater. Interfaces, 8, 11998, 10.1021/acsami.6b01747
Atrens, 2011, Corrosion mechanism applicable to biodegradable magnesium implants, Mater. Sci. Eng. B, 176, 1609, 10.1016/j.mseb.2010.12.017
Gnedenkov, 2016, Localized corrosion of the Mg alloys with inhibitor-containing coatings: SVET and SIET studies, Corros. Sci., 102, 269, 10.1016/j.corsci.2015.10.015
Prabhu, 2018, Stress corrosion cracking of biodegradable Mg-4Zn alloy in simulated body fluid at different strain rates–a fractographic investigation, Mater. Sci. Eng. A, 730, 223, 10.1016/j.msea.2018.06.002
Kuhlmann, 2013, Fast escape of hydrogen from gas cavities around corroding magnesium implants, Acta Biomater., 9, 8714, 10.1016/j.actbio.2012.10.008
Frankel, 2013, Evolution of hydrogen at dissolving magnesium surfaces, Corros. Sci., 70, 104, 10.1016/j.corsci.2013.01.017
Su, 2016, Improvement of the biodegradation property and biomineralization ability of magnesium–hydroxyapatite composites with dicalcium phosphate dihydrate and hydroxyapatite coatings, ACS Biomater. Sci. Eng., 2, 818, 10.1021/acsbiomaterials.6b00013
Zhang, 2019, Influence of surface pretreatment on phosphate conversion coating on AZ91 Mg alloy, Surf. Coat. Technol., 359, 414, 10.1016/j.surfcoat.2018.12.091
Ding, 2018, In vitro corrosion of micro-arc oxidation coating on Mg-1Li-1Ca alloy—the influence of intermetallic compound Mg2Ca, J. Alloys Compd., 764, 250, 10.1016/j.jallcom.2018.06.073
Zhang, 2020, Biodegradation behavior of micro-arc oxidation coating on magnesium alloy-from a protein perspective, Bioact. Mater., 5, 398, 10.1016/j.bioactmat.2020.03.005
Li, 2017, Composite coatings prepared by combined plasma electrolytic oxidation and chemical conversion routes on magnesium-lithium alloy, J. Alloy. Compd., 706, 419, 10.1016/j.jallcom.2017.02.248
Peng, 2018, PEO/Mg–Zn–Al LDH composite coating on Mg alloy as a Zn/Mg ion-release platform with multifunctions: enhanced corrosion resistance, osteogenic, and antibacterial activities, ACS Biomater. Sci. Eng., 4, 4112, 10.1021/acsbiomaterials.8b01184
Zhang, 2016, Formation mechanism and corrosion resistance of the hydrophobic coating on anodized magnesium, Corros. Sci., 111, 334, 10.1016/j.corsci.2016.05.023
Wang, 2010, In vitro degradation and mechanical integrity of Mg-Zn-Ca alloy coated with Ca-deficient hydroxyapatite by the pulse electrodeposition process, Acta Biomater., 6, 1743, 10.1016/j.actbio.2009.12.009
Cui, 2017, Electrodeposition of TiO2 layer-by-layer assembled composite coating and silane treatment on Mg alloy for corrosion resistance, Surf. Coat. Technol., 324, 560, 10.1016/j.surfcoat.2017.06.015
Lamaka, 2008, Novel hybrid sol–gel coatings for corrosion protection of AZ31B magnesium alloy, Electrochim. Acta, 53, 4773, 10.1016/j.electacta.2008.02.015
Su, 2018, Improving the degradation resistance and surface biomineralization ability of calcium phosphate coatings on a biodegradable magnesium alloy via a sol-gel spin coating method, J. Electrochem. Soc., 165, C155, 10.1149/2.0901803jes
Yao, 2018, Corrosion resistance of a ceria/polymethyltrimethoxysilane modified Mg-Al-layered double hydroxide on AZ31 magnesium alloy, J. Alloy. Compd., 764, 913, 10.1016/j.jallcom.2018.06.152
Cui, 2020, In vitro corrosion resistance of layer-by-layer assembled polyacrylic acid multilayers induced Ca-P coating on magnesium alloy AZ31, Bioact. Mater., 5, 153, 10.1016/j.bioactmat.2020.02.001
Liu, 2019, The effects of a phytic acid/calcium ion conversion coating on the corrosion behavior and osteoinductivity of a magnesium-strontium alloy, Appl. Surf. Sci., 484, 511, 10.1016/j.apsusc.2019.04.107
Zhao, 2014, Enhanced antimicrobial properties, cytocompatibility, and corrosion resistance of plasma-modified biodegradable magnesium alloys, Acta Biomater., 10, 544, 10.1016/j.actbio.2013.10.012
Montanaro, 2002, In vitro effects on MG63 osteoblast-like cells following contact with two roughness-differing fluorohydroxyapatite-coated titanium alloys, Biomaterials, 23, 3651, 10.1016/S0142-9612(02)00098-4
Ye, 2011, Bioinspired catecholic chemistry for surface modification, Chem. Soc. Rev., 40, 4244, 10.1039/c1cs15026j
Zhu, 2011, Immobilization of bovine serum albumin onto porous polyethylene membranes using strongly attached polydopamine as a spacer, Colloids Surf., B, 86, 111, 10.1016/j.colsurfb.2011.03.027
Qadir, 2019, Ion-substituted calcium phosphate coatings by physical vapor deposition magnetron sputtering for biomedical applications: a review, Acta Biomater., 89, 14, 10.1016/j.actbio.2019.03.006
Hiromoto, 2015, Self-healing property of hydroxyapatite and octacalcium phosphate coatings on pure magnesium and magnesium alloy, Corros. Sci., 100, 284, 10.1016/j.corsci.2015.08.001
Guo, 2018, Hydroxyapatite/titania composite coatings on biodegradable magnesium alloy for enhanced corrosion resistance, cytocompatibility and antibacterial properties, J. Electrochem. Soc., 165, C962, 10.1149/2.1171814jes
Li, 2016, Corrosion resistance of dicalcium phosphate dihydrate/poly(lactic-co-glycolic acid) hybrid coating on AZ31 magnesium alloy, Corros. Sci., 102, 209, 10.1016/j.corsci.2015.10.010
Xia, 2013, Fabrication and characterization of biomimetic collagen-apatite scaffolds with tunable structures for bone tissue engineering, Acta Biomater., 9, 7308, 10.1016/j.actbio.2013.03.038
Córdoba, 2018, Hybrid coatings with collagen and chitosan for improved bioactivity of Mg alloys, Surf. Coat. Technol., 341, 103, 10.1016/j.surfcoat.2017.08.062
Mushahary, 2014, Collagen type-I leads to in vivo matrix mineralization and secondary stabilization of Mg-Zr-Ca alloy implants, Colloids Surf., B, 122, 719, 10.1016/j.colsurfb.2014.08.005
de Jonge, 2010, The osteogenic effect of electrosprayed nanoscale collagen/calcium phosphate coatings on titanium, Biomaterials, 31, 2461, 10.1016/j.biomaterials.2009.11.114
Inzana, 2014, 3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration, Biomaterials, 35, 4026, 10.1016/j.biomaterials.2014.01.064
Guo, 2019, Enhanced corrosion resistance and biocompatibility of polydopamine/dicalcium phosphate dihydrate/collagen composite coating on magnesium alloy for orthopedic applications, J. Alloys Compd., 152782
Su, 2016, Preparation and corrosion behaviors of calcium phosphate conversion coating on magnesium alloy, Surf. Coat. Technol., 307, 99, 10.1016/j.surfcoat.2016.08.065
Su, 2015, Enhancing the corrosion resistance and surface bioactivity of a calcium-phosphate coating on a biodegradable AZ60 magnesium alloy via a simple fluorine post-treatment method, RSC Adv., 5, 56001, 10.1039/C5RA10315K
ASTM, 2009
Song, 2007, Control of biodegradation of biocompatable magnesium alloys, Corros. Sci., 49, 1696, 10.1016/j.corsci.2007.01.001
Shi, 2010, Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation, Corros. Sci., 52, 579, 10.1016/j.corsci.2009.10.016
Xie, 2017, Synergistic bacteria killing through photodynamic and physical actions of graphene oxide/Ag/collagen coating, ACS Appl. Mater. Interfaces, 9, 26417, 10.1021/acsami.7b06702
Hu, 2011, Surface bioactivity modification of titanium by CO2 plasma treatment and induction of hydroxyapatite: in vitro and in vivo studies, Appl. Surf. Sci., 257, 1813, 10.1016/j.apsusc.2010.08.082
Xia, 2013, Biomimetic fabrication of collagen-apatite scaffolds for bone tissue regeneration, J. Biomater. Tiss. Eng., 3, 369, 10.1166/jbt.2013.1099
Qu, 2008, Synthesis of dense collagen/apatite composites using a biomimetic method, J. Am. Ceram. Soc., 91, 3211, 10.1111/j.1551-2916.2008.02634.x
Cui, 2017, Corrosion resistance of a self-healing micro-arc oxidation/polymethyltrimethoxysilane composite coating on magnesium alloy AZ31, Corros. Sci., 118, 84, 10.1016/j.corsci.2017.01.025
Xia, 2019, Detection of atmospheric corrosion of aluminum alloys by electrochemical probes: theoretical analysis and experimental tests, J. Electrochem. Soc., 166, B1000, 10.1149/2.0871912jes
Zhang, 2017, Facile preparation of poly(lactic acid)/brushite bilayer coating on biodegradable magnesium alloys with multiple functionalities for orthopedic application, ACS Appl. Mater. Interfaces, 9, 9437, 10.1021/acsami.7b00209
Mousa, 2018, A multifunctional zinc oxide/poly(lactic acid) nanocomposite layer coated on magnesium alloys for controlled degradation and antibacterial function, ACS Biomater. Sci. Eng., 4, 2169, 10.1021/acsbiomaterials.8b00277
Mousa, 2016, In vitro degradation behavior and cytocompatibility of a bioceramic anodization films on the biodegradable magnesium alloy, Colloids Surf. A Physicochem. Eng. Asp., 488, 82, 10.1016/j.colsurfa.2015.10.003
Zeng, 2016, In vitro corrosion and cytocompatibility of a microarc oxidation coating and poly(L-lactic acid) composite coating on Mg-1Li-1Ca alloy for orthopedic implants, ACS Appl. Mater. Interfaces, 8, 10014, 10.1021/acsami.6b00527