Enhanced bromine fixation and tar lightweighting in co-pyrolysis of non-metallic fractions of waste printed circuit boards with Bayer red mud

Aljerf, 2015, Effect of thermal-cured hydraulic cement admixtures on the mechanical properties of concrete, InterCeram: Int. Ceram. Rev., 64, 346 Altarawneh, 2013, A mechanistic and kinetic study on the formation of PBDD/Fs from PBDEs, Environ. Sci. Technol., 47, 5118, 10.1021/es305081j Altarawneh, 2014, Mechanism of thermal decomposition of Tetrabromobisphenol A (TBBA), J. Phys. Chem. A, 118, 9338, 10.1021/jp505742u Altarawneh, 2019, Thermal decomposition of brominated flame retardants (BFRs): products and mechanisms, Prog. Energ. Combust. Sci, 70, 212, 10.1016/j.pecs.2018.10.004 Balabanovich, 2005, GC/MS identification of pyrolysis products from fire-retardant brominated epoxy resin, J. Fire Sci., 23, 227, 10.1177/0734904105047006 Barontini, 2004, The thermal degradation process of tetrabromobisphenol A, Ind. Eng. Chem. Res., 43, 1952, 10.1021/ie034017c Botelho, 2021, Extraction of scandium from critical elements-bearing mining waste: Silica gel avoiding in leaching reaction of bauxite residue, J. Sustain. Metall., 7, 1627, 10.1007/s40831-021-00434-3 Cakici, 2004, Utilization of red mud as catalyst in conversion of waste oil and waste plastics to fuel, J. Mater. Cycles. Waste., 6, 20, 10.1007/s10163-003-0101-y Cao, 2022, Research on the pyrolysis characteristics and mechanisms of waste printed circuit boards at fast and slow heating rates, Waste Manage., 149, 134, 10.1016/j.wasman.2022.06.008 Catherine, 2005, Mechanisms of dioxin formation from the high-temperature oxidation of 2-bromophenol, Environ. Sci. Technol., 39, 2128, 10.1021/es048461y Chandane, 2020, Bioleaching of copper from large printed circuit boards for synthesis of organic-inorganic hybrid, Environ. Sci. Pollut. R., 27, 5797, 10.1007/s11356-019-07244-x Chen, 2021, A cost-effective strategy for metal recovery from waste printed circuit boards via crushing pretreatment combined with pyrolysis: effects of particle size and pyrolysis temperature, J. Clean. Prod., 280, 10.1016/j.jclepro.2020.124505 Chen, 2021, Co-pyrolysis of waste printed circuit boards with iron compounds for Br-fixing and material recovery, Environ. Sci. Pollut. R., 28, 64642, 10.1007/s11356-021-15506-w Chen, 2018, Kinetic simulation and prediction of pyrolysis process for non-metallic fraction of waste printed circuit boards by discrete distributed activation energy model compared with isoconversional method, Environ. Sci. Pollut. R., 25, 3636, 10.1007/s11356-017-0763-y Chen, 2021, New insights into the debromination mechanism of non-metallic fractions of waste printed circuit boards via alkaline-enhanced subcritical water route, Resour. Conserv. Recy., 165, 10.1016/j.resconrec.2020.105227 Chen, 2020, Catalytic performance and debromination of Fe-Ni bimetallic MCM-41 catalyst for the two-stage pyrolysis of waste computer casing plastic, Chemosphere, 248, 10.1016/j.chemosphere.2020.125964 Chen, 2018, Improving bromine fixation in co-pyrolysis of non-metallic fractions of waste printed circuit boards with Bayer red mud, Sci. Total. Environ., 639, 1553, 10.1016/j.scitotenv.2018.05.269 Das, 2020, Value-added products from thermochemical treatments of contaminated e-waste plastics, Chemosphere, 269 Das, 2019, A review on advances in sustainable energy production through various catalytic processes by using catalysts derived from waste red mud, Renew. Energ., 143, 1791, 10.1016/j.renene.2019.05.114 Davidovits, 2011 Faraji, 2018, Fungal bioleaching of WPCBs using Aspergillus niger: observation, optimization and kinetics, J. Environ. Manage., 217, 775, 10.1016/j.jenvman.2018.04.043 Faraji, 2022, Potential and current practices of recycling waste printed circuit boards: a review of the recent progress in pyrometallurgy, J. Environ. Manage., 316, 10.1016/j.jenvman.2022.115242 Gandon, 2022, Mechanochemical debromination of waste printed circuit boards with marble sludge in a planetary ball milling process, J. Environ. Manage., 317 Gao, 2019, Novel utilization of pyrolysis products produced from waste printed circuit boards: catalytic cracking and synthesis of graphite carbon, J. Clean. Prod., 236, 17662, 10.1016/j.jclepro.2019.117662 Gao, 2020, In-situ debromination mechanism based on self-activation and catalysis of Ca(OH)2 during pyrolysis of waste printed circuit boards, J. Hazard. Mater., 392, 10.1016/j.jhazmat.2020.122447 Gao, 2020, Research of the thermal decomposition mechanism and pyrolysis pathways from macromonomer to small molecule of waste printed circuit board, J. Hazard. Mater., 383, 10.1016/j.jhazmat.2019.121234 Grause, 2008, Pyrolysis of tetrabromobisphenol-A containing paper laminated printed circuit boards, Chemosphere, 71, 872, 10.1016/j.chemosphere.2007.11.033 Grigorescu, 2020, Development of thermoplastic composites based on recycled polypropylene and waste printed circuit boards, Waste Manage., 118, 391, 10.1016/j.wasman.2020.08.050 Guo, 2009, Asphalt modified with nonmetals separated from pulverized waste printed circuit boards, Environ. Sci. Technol., 43, 503, 10.1021/es8023012 Guo, 2009, Recycling of non-metallic fractions from waste printed circuit boards: a review, J. Hazard. Mater., 168, 567, 10.1016/j.jhazmat.2009.02.104 Guo, 2020, Thermal degradation and pollutant emission from waste printed circuit boards mounted with electronic components, J. Hazard. Mater., 382, 10.1016/j.jhazmat.2019.121038 Hadi, 2015, Waste printed circuit board recycling techniques and product utilization, J. Hazard. Mater., 283, 234, 10.1016/j.jhazmat.2014.09.032 Hu, 2019, Role of Fe species in geopolymer synthesized from alkali-thermal pretreated Fe-rich Bayer red mud, Constr. Build. Mater., 200, 398, 10.1016/j.conbuildmat.2018.12.122 Jadhao, 2020, Environmentally friendly approach for the recovery of metallic fraction from waste printed circuit boards using pyrolysis and ultrasonication, Waste Manage., 118, 150, 10.1016/j.wasman.2020.08.028 Jiao, 2012, Synthesis of morphology-controlled mesoporous transition aluminas derived from the decomposition of alumina hydrates, Micropor. Mesopor. Mat., 147, 167, 10.1016/j.micromeso.2011.06.012 Khalil, 2022, On the Investigation of the thermal degradation of waste printed circuit boards for recycling applications, Adv. Sustain. Syst., 6, 2100054, 10.1002/adsu.202100054 Kim, 2013, Pyrolysis reaction pathways of waste epoxy-printed circuit board, Environ. Eng. Sci., 30, 706, 10.1089/ees.2013.0166 Korus, 2017, Pyrolytic toluene conversion to benzene and coke over activated carbon in a fixed-bed reactor, Fuel, 207, 283, 10.1016/j.fuel.2017.06.088 Kumari, 2022, A critical review of the pre-processing and metals recovery methods from e-wastes, J. Environ. Manage., 320, 10.1016/j.jenvman.2022.115887 Lin, 2022, The effect of microwave pyrolysis on product characteristics and bromine migration for a non-metallic printed circuit board, Waste Manage., 153, 147, 10.1016/j.wasman.2022.08.030 Liu, 2018, Kinetic and mechanism studies on pyrolysis of printed circuit boards in the absence and presence of copper, ACS Sustain. Chem. Eng., 7, 1879, 10.1021/acssuschemeng.8b03382 Lu, 2022, An automatic sorting system for electronic components detached from waste printed circuit boards, Waste Manage., 137, 1, 10.1016/j.wasman.2021.10.016 Luda, 2003, Thermal degradation of a brominated bisphenol a derivative, Polym. Adv. Technol., 14, 741, 10.1002/pat.389 Ma, 2019, Effect of steam-iron reaction on product characteristics and debromination during pyrolysis of epoxy-printed circuit boards, J. Hazard. Mater., 379, 10.1016/j.jhazmat.2019.120803 Ma, 2019, Enhanced debromination by Fe particles during the catalytic pyrolysis of non-metallic fractions of printed circuit boards over ZSM-5 and Ni/SiO2-Al2O3 catalyst, J. Anal. Appl. Pyrol., 138, 170, 10.1016/j.jaap.2018.12.021 Ni, 2012, Combustion and inorganic bromine emission of waste printed circuit boards in a high temperature furnace, Waste Manage., 32, 568, 10.1016/j.wasman.2011.10.016 Ordonez, 2001, Catalytic hydrodechlorination of tetrachloroethylene over red mud, J. Hazard. Mater., 81, 103, 10.1016/S0304-3894(00)00317-4 Owens, 2007, Identification of estrogenic compounds emitted from the combustion of computer printed circuit boards in electronic waste, Environ. Sci. Technol., 41, 8506, 10.1021/es071425p Pan, 2016, The photodegradation of polybrominated diphenyl ethers (PBDEs) in various environmental matrices: kinetics and mechanisms, Chem. Eng. J., 297, 74, 10.1016/j.cej.2016.03.122 Prajapati, 2021, Slurry phase hydrocracking of heavy oil and residue to produce lighter fuels: an experimental review, Fuel, 288, 10.1016/j.fuel.2020.119686 Preetam, 2022, A sustainable approach for material and metal recovery from E-waste using subcritical to supercritical methanol, Waste Manage., 145, 29, 10.1016/j.wasman.2022.04.011 Qin, 2020, A novel approach of accurately rationing adsorbent for capturing pollutants via chemistry calculation: Rationing the mass of CaCO3 to capture Br-containing substances in the pyrolysis of nonmetallic particles of waste printed circuit boards, J. Hazard. Mater., 393, 10.1016/j.jhazmat.2020.122410 Shen, 2018, Effect of chemical pretreatment on pyrolysis of non-metallic fraction recycled from waste printed circuit boards, Waste Manage., 76, 537, 10.1016/j.wasman.2018.02.036 Terakado, 2011, Thermal degradation study of tetrabromobisphenol A under the presence metal oxide: Comparison of bromine fixation ability, J. Anal. Appl. Pyrol., 91, 303, 10.1016/j.jaap.2011.03.006 Terakado, 2013, Bromine fixation by metal oxide in pyrolysis of printed circuit board containing brominated flame retardant, J. Anal. Appl. Pyrol., 103, 216, 10.1016/j.jaap.2012.10.022 Touze, 2020, Sampling waste printed circuit boards: Achieving the right combination between particle size and sample mass to measure metal content, Waste Manage., 118, 380, 10.1016/j.wasman.2020.08.054 Wang, 2015, The effects of activated Al2O3 on the recycling of light oil from the catalytic pyrolysis of waste printed circuit boards, Process. Saf. Environ. Prot., 98, 276, 10.1016/j.psep.2015.07.007 Wang, 2022, Catalytic activity evaluation and deactivation progress of red mud/carbonaceous catalyst for efficient biomass gasification tar cracking, Fuel, 323, 10.1016/j.fuel.2022.124278 Wen, 2021, A study on the reaction mechanism of microwave pyrolysis of oily sludge by products analysis and ReaxFF MD simulation, Environ. Technol., 43, 1 Williams, 2010, Valorization of printed circuit boards from waste electrical and electronic equipment by pyrolysis, Waste Biomass Valori., 1, 107, 10.1007/s12649-009-9003-0 Xia, 2022, Dioxin emission prediction based on improved deep forest regression for municipal solid waste incineration process, Chemosphere, 294, 10.1016/j.chemosphere.2022.133716 Xing, 2020, Swelling-enhanced catalytic degradation of brominated epoxy resin in waste printed circuit boards by subcritical acetic acid under mild conditions, Waste Manage., 102, 464, 10.1016/j.wasman.2019.11.011 Ye, 2014, Synthesis and characterization of geopolymer from Bayer red mud with thermal pretreatment, J. Am. Ceram. Soc., 97, 1652, 10.1111/jace.12840 Ye, 2016, Co-disposal of MSWI fly ash and Bayer red mud using an one-part geopolymeric system, J. Hazard. Mater., 318, 70, 10.1016/j.jhazmat.2016.06.042 Ye, 2016, Synthesis and strength optimization of one-part geopolymer based on red mud, Constr. Build. Mater., 111, 317, 10.1016/j.conbuildmat.2016.02.099 Ye, 2017, Transformations of Na, Al, Si and Fe species in red mud during synthesis of one-part geopolymers, Cem. Concr. Res., 101, 123, 10.1016/j.cemconres.2017.08.027 Ye, 2018, Improvement of pyrolysis oil obtained from co-pyrolysis of WPCBs and compound additive during two stage pyrolysis, J. Anal. Appl. Pyrol., 135, 415, 10.1016/j.jaap.2018.06.011 Ye, 2018, The debrominated and lightweight oil generated from two stage pyrolysis of WPCBs by using compound chemical additives, Process Saf. Environ., 116, 654, 10.1016/j.psep.2018.03.025 Yokoyama, S., Iji, M., 1997. Recycling of printed wiring boards with mounted electronic parts, In: Proceedings of the 1997 IEEE International Symposium on Electronics and the Environment. ISEE-1997, pp. 109–114. <https://ieeexplore.ieee.org/abstract/document/605282>. Zhang, 2021, Microwave-assisted catalytic pyrolysis of waste printed circuit boards, and migration and distribution of bromine, J. Hazard. Mater., 402, 10.1016/j.jhazmat.2020.123749 Zhao, 2017, Catalytic pyrolysis characteristics of scrap printed circuit boards by TG-FTIR, Waste Manage., 61, 354, 10.1016/j.wasman.2016.12.019 Zheng, 2009, The reuse of nonmetals recycled from waste printed circuit boards as reinforcing fillers in the polypropylene composites, J. Hazard. Mater., 163, 600, 10.1016/j.jhazmat.2008.07.008 Zhuang, 2022, Comprehensive review on mechanism analysis and numerical simulation of municipal solid waste incineration process based on mechanical grate, Fuel, 320, 10.1016/j.fuel.2022.123826