Enhanced anticorrosion properties of epoxy coatings from Al and Zn based pigments

Chemical Research in Chinese Universities - Tập 31 - Trang 573-580 - 2015
Kai Wan1, Changcheng Li1, Cuijuan Xing2, Haizhou Zhao1, Liangmin Yu1
1Key Laboratory of Marine Chemistry Theory and Technology, Ministry of Education, College of Chemistry and Chemical Engineering, Ocean University of China, Qingdao, P. R. China
2College of Chemical Engineering and Biotechnology, Xingtai University, Xingtai, P. R. China

Tóm tắt

Anticorrosion epoxy coatings from Al and Zn based pigments were synthesized by adjusting their volume ratios, aiming at their increasing anticorrosion performances. The anticorrosion properties were examined via electrochemical impedance spectroscopy, Tafel polarization curve analysis and salt spray test. The coating morphologies before and after the salt spray tests were studied via scanning electron microscopy(SEM). The elemental and chemical compositions of the corroded surfaces of the coatings were analyzed by means of X-ray photoelectron spectroscopy(XPS). The results indicate that the coating composed of Al/Zn at 10:1(volume ratio) displays the maximum anticorrosion performances, which are superior to those of pristine Al or Zn based pigment.

Tài liệu tham khảo

Ahmad N., MacDiarmd A. G., Synth. Met., 1996, 78(2), 103 Shimura T., Aramaki K., Corros. Sci., 2008, 50(1), 292 Saremi M., Yeganeh M., Corros. Sci., 2014, 86, 159 Ghanbari A., Attar M. M., Mahdavian M., Mater. Chem. Phys., 2010, 124(2/3), 1205 Ramezanzadeh B., Attar M. M., Prog. Org. Coat., 2011, 71(3), 314 Mousavifard S. M., Mohammadi P. M., Attar M. M., Ramezanzadeh B., J. Ind. Eng. Chem., 2013, 19(3), 1031 Chua H. H., Johnson B. V., Ross T. K., Corros. Sci., 1978, 18(6), 505 Gergely A., Pfeifer E., Bertóti I., Török T., Kálmán E., Corros. Sci., 2011, 53(11), 3486 Hammouda N., Chadli H., Guillemot G., Belmokre K., Adv. Chem. Eng. Sci., 2011, 1(2), 51 Morizane T., Yamada Y., Takagishi J., Matsuno H., Ohshiba M., Aqueous Inorganic Zinc-rich Coating Composition, US20110030584, 2011 Canosa G., Alfieri P. V., Giudice C. A., Prog. Org. Coat., 2012, 73(2/3), 178 Kakaei M. N., Danaee I., Zaarei D., Corros. Eng. Sci. Technol., 2013, 47, 1940 Gervasi C. A., Sarli A. R., Cavalcanti E., Ferraz O., Bucharsky E. C., Real S. G., Vilche J. R., Corros. Sci., 1994, 36(12), 1963 Ahadi M. M., Attar M. M., Sci. Iran., 2007, 14(4), 369 Shreepathi S., Baja P. J., Mallik B. P., Electrochim. Acta, 2010, 55(18), 5129 Meroufel A., Deslouis C., Touzain S., Electrochim. Acta, 2008, 53(5), 2331 Nikravesh B., Ramezanzadeh B., Sarabi A. A., Kasiriha S. M., Corros. Sci., 2011, 53(4), 1592 Ramezanzadeh B., Arma S. Y., Mehdipour M., J. Coat. Technol. Res., 2014, 11(5), 727 Naderi R., Attar M. M., Corros. Sci., 2010, 52(4), 1291 Wernick S., Pinner R., Sheasby P. G., ASM International Materials Park, Ohio, 2001, 1387 Lin S., Shih H., Mansfeld F., Corros. Sci., 1992, 33(9), 1331 Gonzalez S., Mirza Rosca I. C., Prog. Org. Coat., 2001, 43(4), 282 Gonzalez S., Caceres F., Fox V., Souto R. M., Prog. Org. Coat., 2003, 46(4), 317 Duchoslav J., Steinberger R., Arndt M., Keppert T., Luckeneder G., Stellnberger K. H., Hagler J., Angeli G., Riener C. K., Stifter D., Corros. Sci., 2015, 91, 311 Schuerz S., Fleischanderl M., Luckeneder G. H., Preis K., Haunschmied T., Mori G., Kneissl A. C., Corros. Sci., 2009, 51(10), 2355 Diler B., Rouvellou S., Rioual B., Lescop G., Nguyen V. D., Corros. Sci., 2014, 87, 111 Gordon B., Dennis T., Junping L., Lingyun H., Caro J., Prog. Org. Coat., 2003, 46(2), 148 Sykes J. M., Xu Y., Prog. Org. Coat., 2012, 74(2), 320 Emregul K. C., Aksut A. A., Corros. Sci., 2000, 42(12), 2051 Mu A., Corros. Sci., 1999, 41(7), 1447 Salgueiro Azevedo M., Allély C., Ogle K., Volovitch P., Corros. Sci., 2015, 90, 472 Schürz S., Luckeneder G. H., Fleischanderl M., Mack P., Gsaller H., Kneissl A. C., Mori G. E., Corros. Sci., 2010, 52(2), 3271 Duchoslav J., Arnd M. T., Kepper T. T., Luckeneder G., Stifter D., Anal. Bioanal. Chem., 2013, 405(22), 7133