Energy and seismic drawbacks of masonry: a unified retrofitting solution
Tóm tắt
Từ khóa
Tài liệu tham khảo
Gkournelos DP, Bournas DA, Triantafillou TC (2019) Combined seismic and energy upgrading of existing buildings using advanced materials, EUR 29172 EN, Publications Office of the European Union, Luxembourg. ISBN 978-92-79-81824-0, https://doi.org/10.2760/17376, JRC111303
European Union. Directive 2012/27/EU of the European Parliament and of the Council of 25 October 2012 on Energy Efficiency, Amending Directives 2009/125/EC and 2010/30/EU and Repealing Directives 2004/8/EC and 2006/32/EC. Brussels, 14 November 2012. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=celex%3A32012L0027. Accessed Apr 2021
Nanni A (2003) North American design guidelines for concrete reinforcement and strengthening using FRP: principles, applications and unresolved issues. Constr Build Mater 17(6–7):439–446
Al-Saadi NTK, Mohammed A, Al-Mahaidi R, Sanjayan J (2019) A state-of-the-art review: Near-surface mounted FRP composites for reinforced concrete structures. Constr Build Mater 209:748–769
Aiello MA, Cascardi A, Ombres L, Verre S (2020) Confinement of masonry columns with the FRCM-system: theoretical and experimental investigation. Infrastructures 5(11):1–14. https://doi.org/10.3390/infrastructures5110101
Ombres L, Verre S (2020) Analysis of the behavior of FRCM confined clay brick masonry columns. Fibers. https://doi.org/10.3390/fib8020011
Ombres L, Verre S (2019) Numerical modeling approaches of FRCMs/SRG confined masonry columns. Front Built Environ. https://doi.org/10.3389/fbuil.2019.00143
Aiello MA, Cascardi A, Ombres L, Verre S (2020) Open issue for confinement of masonry column with FRCM system: theoretical and experimental investigation. Paper presented at the REHABEND, 2121–2129
Koutas BLN, Tetta Z, Bournas DA, Triantafillou TC (2019) Strengthening of concrete structures with textile reinforced mortars: state-of-the-art review. J Compos Constr 23(I):1–43
Del Zoppo M, Di Ludovico M, Prota A (2019) Analysis of FRCM and CRM parameters for the in-plane shear strengthening of different URM types. Compos B Eng 171:20–33
Butler M, Mechtcherine V, Hempel S (2010) Durability of textile reinforced concrete made with AR glass fibre: effect of the matrix composition. Mater Struct 43(10):1351–1368
Parisi F, Iovinella I, Balsamo A, Augenti N, Prota A (2013) In-plane behaviour of tuff masonry strengthened with inorganic matrix–grid composites. Compos B Eng 45(1):1657–1666
Del Zoppo M, Di Ludovico M, Balsamo A, Prota A (2019) In-plane shear capacity of tuff masonry walls with traditional and innovative Composite Reinforced Mortars. Constr Build Mater 210:289–300
De Lorenzis L, Galati N, Ombres L (2004) In-plane shear strengthening of natural masonry walls with NSM CFRP strips and FRCM overlay. In: Structural Analysis of Historical Constructions-2 Volume Set: Possibilities of Numerical and Experimental Techniques-Proceedings of the IVth Int. Seminar on Structural Analysis of Historical Constructions, 10–13 November 2004, Padova
Mantegazza G, Gatti A, Barbieri A (2006) Retrofitting concrete and masonry building: FRCM (fiber reinforced cementitious matrix) a new emerging technology. XII Konferencja Naukowo-Techniczna Problemy Remontowe W Budownictwie Ogólnym i Obiektach Zabytkowych REMO, 6–8
Prota A, Marcari G, Fabbrocino G, Manfredi G, Aldea C (2006) Experimental in-plane behavior of tuff masonry strengthened with cementitious matrix–grid composites. J Compos Constr 10(3):223–233
Faella C, Martinelli E, Nigro E, Paciello S (2010) Shear capacity of masonry walls externally strengthened with a cement-based composite material: an experimental campaign. Constr Build Mater 24(1):84–93
Babaeidarabad S, De Caso F, Nanni A (2014) URM walls strengthened with fabric-reinforced cementitious matrix composite subjected to diagonal compression. J Compos Constr 18(2):04013045
Balsamo A, Iovinella I, Morandini G (2014). FRG strengthening systems for masonry building. In: NZSEE Conference
Corradi M, Borri A, Castori G, Sisti R (2014) Shear strengthening of wall panels through jacketing with cement mortar reinforced by GFRP grids. Compos B Eng 64:33–42
Ismail N, Ingham JM (2014) Polymer textiles as a retrofit material for masonry walls. Proc Inst Civil Eng Struct Build 167(1):15–25
Koutas L, Triantafillou TC, Bousias SN (2015) Analytical modeling of masonry-infilled RC frames retrofitted with textile-reinforced mortar. J Compos Constr 19(5):04014082
Almeida JA, Pereira EB, Barros JA (2015) Assessment of overlay masonry strengthening system under in-plane monotonic and cyclic loading using the diagonal tensile test. Constr Build Mater 94:851–865
Gattesco N, Boem I (2015) Experimental and analytical study to evaluate the effectiveness of an in-plane reinforcement for masonry walls using GFRP meshes. Constr Build Mater 88:94–104
Gattesco N, Boem I, Dudine A (2015) Diagonal compression tests on masonry walls strengthened with a GFRP mesh reinforced mortar coating. Bull Earthq Eng 13(6):1703–1726
Menna C, Asprone D, Durante M, Zinno A, Balsamo A, Prota A (2015) Structural behaviour of masonry panels strengthened with an innovative hemp fibre composite grid. Constr Build Mater 100:111–121
Balsamo A, Asprone D, Iovinella I, Maddaloni G, Menna C, Prota A et al (2016) Effectiveness of inorganic matrix–grid composites for strengthening masonry walls. In: Brick and Block Masonry. CRC Press, pp 2013–2020
Borri A, Corradi M, Sisti R, Buratti C, Belloni E, Moretti E (2016) Masonry wall panels retrofitted with thermal-insulating GFRP-reinforced jacketing. Mater Struct 49(10):3957–3968
Ferretti F, Incerti A, Ferracuti B, Mazzotti C (2016) Diagonal compression tests on masonry panels strengthened with FRP and FRCM. In: Proc. of the 10th SAHC Conference, vol 13. Lueven, p 15
Micelli F, Sciolti MS, Leone M, Aiello MA, Dudine A (2016) Shear behaviour of Fiber Reinforced Mortar strengthened masonry walls built with limestone blocks and hydraulic mortar. In: da Porto, Valluzzi (eds) Brick and Block Masonry–Trends, Innovations and Challenges–Modena
Yardim Y, Lalaj O (2016) Shear strengthening of unreinforced masonry wall with different fiber reinforced mortar jacketing. Constr Build Mater 102:149–154
Ferretti F, Incerti A, Ferracuti B, Mazzotti C (2017) FRCM strengthened masonry panels: the role of mechanical anchorages and symmetric layouts. In: Key Engineering Materials, vol 747. Trans Tech Publications Ltd. pp 334–341
Ismail N, El-Maaddawy T, Najmal A, Khattak N (2017) Diagonal tension testing of as-built and fabric reinforced cementitious matrix strengthened masonry panels. In: Proceedings of the 16th World Conference of Earthquake Engineering (16WCEE), Chile, pp 9–13
Marcari G, Basili M, Vestroni F (2017) Experimental investigation of tuff masonry panels reinforced with surface bonded basalt textile-reinforced mortar. Compos B Eng 108:131–142
Mustafaraj E, Yardim Y (2018) In-plane shear strengthening of unreinforced masonry walls using GFRP jacketing. Period Polytech Civil Eng 62(2):330–336
Sagar SL, Singhal V, Rai DC, Gudur P (2017) Diagonal shear and out-of-plane flexural strength of fabric-reinforced cementitious matrix–strengthened masonry walletes. J Compos Constr 21(4):04017016
Carozzi FG, D’Antino T, Poggi C (2018) In-situ experimental tests on masonry panels strengthened with Textile Reinforced Mortar composites. Proc Struct Integr 11:355–362
Giaretton M, Dizhur D, Garbin E, Ingham JM, da Porto F (2018) In-plane strengthening of clay brick and block masonry walls using textile-reinforced mortar. J Compos Constr 22(5):04018028
Incerti A, Tilocca AR, Ferretti F, Mazzotti C (2019) Influence of masonry texture on the shear strength of FRCM reinforced panels. In: Structural analysis of historical constructions. Springer, Cham, pp. 1623–1631
Ismail N, El-Maaddawy T, Khattak N, Najmal A (2018) In-plane shear strength improvement of hollow concrete masonry panels using a fabric-reinforced cementitious matrix. J Compos Constr 22(2):04018004
Ismail N, El-Maaddawy T, Najmal A, Khattak N (2018) Experimental in-plane performance of insulated concrete and brick masonry wall panels retrofitted using polymer composites. Bull N Z Soc Earthq Eng 51(2):85–91
Shabdin M, Zargaran M, Attari NK (2018) Experimental diagonal tension (shear) test of Un-Reinforced Masonry (URM) walls strengthened with textile reinforced mortar (TRM). Constr Build Mater 164:704–715
Wang X, Lam CC, Iu VP (2018) Experimental investigation of in-plane shear behaviour of grey clay brick masonry panels strengthened with SRG. Eng Struct 162:84–96
Casacci S, Gentilini C, Di Tommaso A, Oliveira DV (2019) Shear strengthening of masonry wallettes resorting to structural repointing and FRCM composites. Constr Build Mater 206:19–34
D'Antino T, Carozzi FG, Poggi C (2019) Diagonal compression of masonry walls strengthened with composite reinforced mortar. In: Key Engineering Materials, vol 817. Trans Tech Publications Ltd., pp 528–535
Del Zoppo M, Di Ludovico M, Balsamo A, Prota A (2019) Experimental in-plane shear capacity of clay brick masonry panels strengthened with FRCM and FRM composites. J Compos Constr 23(5):04019038
Ferretti F, Incerti A, Tilocca AR, Mazzotti C (2019) In-plane shear behavior of stone masonry panels strengthened through grout injection and fiber reinforced cementitious matrices. Int J Archit Herit. https://doi.org/10.1080/15583058.2019.1675803
Incerti A, Ferretti F, Mazzotti C (2019) FRCM strengthening systems efficiency on the shear behavior of pre-damaged masonry panels: an experimental study. J Build Pathol Rehabil 4(1):14
Tilocca AR, Incerti A, Bellini A, Savoia M (2019) Influence of matrix properties on FRCM-CRM strengthening systems. In: Key engineering materials, vol 817. Trans Tech Publications Ltd., pp 478–485
Wang X, Lam CC, Iu VP (2019) Comparison of different types of TRM composites for strengthening masonry panels. Constr Build Mater 219:184–194
Dalalbashi A, Ghiassi B, Oliveira DV (2020) In-plane behavior of clay brick masonry wallets strengthened with TRM system. In: 3D RILEM spring convention 2020 at Guimarães, Portugal
Mercedes L, Bernat-Maso E, Gil L (2020) In-plane cyclic loading of masonry walls strengthened by vegetal-fabric-reinforced cementitious matrix (FRCM) composites. Eng Struct 221:111097
Tripathy D, Meghwal P, Singhal V (2020) Strengthening of lime mortar masonry wallettes using fiber-reinforced cementitious matrix. J Compos Constr 24(6):04020075
Gulinelli P, Aprile A, Rizzoni R, Grunevald YH, Lebon F (2020) Multiscale numerical analysis of TRM-reinforced masonry under diagonal compression tests. Buildings 10(11):196
Torres B, Varona FB, Baeza FJ, Bru D, Ivorra S (2020) Study on retrofitted masonry elements under shear using digital image correlation. Sensors 20(7):2122
Donnini J, Maracchini G, Lenci S, Corinaldesi V, Quagliarini E (2021) TRM reinforced tuff and fired clay brick masonry: experimental and analytical investigation on their in-plane and out-of-plane behavior. Constr Build Mater 272:121643
Triantafillou TC, Karlos K, Kefalou K, Argyropoulou E (2017) An innovative structural and energy retrofitting system for URM walls using textile reinforced mortars combined with thermal insulation: mechanical and fire behavior. Constr Build Mater 133:1–13
Bournas DA (2018) Concurrent seismic and energy retrofitting of RC and masonry building envelopes using inorganic textile-based composites combined with insulation materials: a new concept. Compos B Eng 148:166–179
Longo F, Lassandro P, Moshiri A, Phatak T, Aiello MA, Krakowiak KJ (2020) Lightweight geopolymer-based mortars for the structural and energy retrofit of buildings. Energy Build 225:110352
Longo F, Cascardi A, Lassandro P, Aiello MA (2020) A new Fabric Reinforced Geopolymer Mortar (FRGM) with mechanical and energy benefits. Fibers 8(8):49
Haq EU, Padmanabhan SK, Licciulli A (2014) In-situ carbonation of alkali activated fly ash geopolymer. Constr Build Mater 66:781–786
Provis JL, Van Deventer JSJ (eds) (2009) Geopolymers: structures, processing, properties and industrial applications. Elsevier, Amsterdam
Alanazi H, Hu J, Kim YR (2019) Effect of slag, silica fume, and metakaolin on properties and performance of alkali-activated fly ash cured at ambient temperature. Constr Build Mater 197:747–756
Aydin E (2017) Staple wire-reinforced high-volume fly-ash cement paste composites. Constr Build Mater 153:393–401
Atiyeh M, Aydin E (2020) Carbon-fiber enriched cement-based composites for better sustainability. Materials 13(8):1899
Al-Subari L, Ekinci A, Aydın E (2021) The utilization of waste rubber tire powder to improve the mechanical properties of cement-clay composites. Constr Build Mater 300:124306
Micelli F, Maddaloni G, Longo F, Prota A (2021) Axial stress–strain model for frcm confinement of masonry columns. J Compos Constr 25(1):04020078
UNI E (2007) 771-1:2015. Specification for masonry units—Part 1: Clay masonry units
UNI E (2007) 1015-11. Methods of test for mortar for masonry—Part 11: determination of flexural and compressive strength of hardened mortar
UNI E (2001) 1052-1. Methods of test for masonry—determination of compressive strength
Consiglio Superiore dei Lavori Pubblici CS (2015) Linea Guida per la identificazione, la qualificazione ed il controllo di accettazione di compositi fibrorinforzati a matrice inorganica (FRCM) da utilizzarsi per il consolidamento strutturale di costruzioni esistenti. In Italian. Standards for the Qualification of Fabric Reinforced Cementitious Mortar (FRCM) composites for the reinforcement of existing structures
ASTM C518-04 (2004) Standard test method for steady-state thermal transmission properties by means of the heat flow meter apparatus. ASTM International, West Conshohocken. www.astm.org
ASTM E1530–06 (2006) Standard test method for evaluating the resistance to thermal transmission of materials by the guarded heat flow meter technique. ASTM International, West Conshohocken. www.astm.org
Howell JR, Siegel R, Mengüç MP (1969) Thermal radiation heat transfer. National Aeronautics and Space Administration
Albatici R, Passerini F, Tonelli AM, Gialanella S (2013) Assessment of the thermal emissivity value of building materials using an infrared thermovision technique emissometer. Energy Build 66:33–40
Emmel MG, Abadie MO, Mendes N (2007) New external convective heat transfer coefficient correlations for isolated low-rise buildings. Energy Build 39(3):335–342
ASTM E519 / E519M-10 (2010) Standard test method for diagonal tension (shear) in masonry assemblages. ASTM International, West Conshohocken. www.astm.org
Donatelli A, Aversa P, Luprano VAM (2016) Set-up of an experimental procedure for the measurement of thermal transmittances via infrared thermography on lab-made prototype walls. Infrared Phys Technol 79:135–143
Kontoleon KJ, Theodosiou TG, Tsikaloudaki KG (2013) The influence of concrete density and conductivity on walls’ thermal inertia parameters under a variety of masonry and insulation placements. Appl Energy 112:325–337