Energy and emissions analysis of next generation electrochromic devices

EU Directive 2010/31/CE on the energy performance of buildings (EPBD). UNEP-SBCI, United Nation's Environment Programme's Sustainable Building and Climate Initiative. Asdrubali, 2013, Life cycle analysis in the construction sector: guiding the optimization of conventional Italian buildings, Energy Build., 64, 73, 10.1016/j.enbuild.2013.04.018 A. Gustavsen, B.P. Jelle, D. Arasteh, C. K., State-of-the-Art highly insulating window frames – Research and Market Review, 2007. Asdrubali, 2009, Theoretical modelling and experimental evaluation of the optical properties of glazing systems with selective coatings, Build. Simul., 2, 75, 10.1007/s12273-009-9112-5 K. Allaker, C. Baldassarri, M. Calero, F. Mathieux, Y. R., Using life cycle based environmental assessment in developing innovative multi-functional glass-polymer windows, in: Proceedings of the Sustainable Building Conference, Graz, Austria, 2013. Jelle, 2012, Fenestration of today and tomorrow: a state-of-the-art review and future research opportunities, Solar Energy Mater. Solar Cells, 96, 1, 10.1016/j.solmat.2011.08.010 Tarantini, 2011, A life cycle approach to Green Public Procurement of building materials and elements: a case study on windows, Energy, 36, 2473, 10.1016/j.energy.2011.01.039 Baetens, 2010, Properties, requirements and possibilities of smart windows for dynamic Daylight and solar energy control in buildings: a state-of-the-art review, Solar Energy Mater. Solar Cells, 87, 10.1016/j.solmat.2009.08.021 E.-S. Lee, Advancement of Electrochromic Windows, in: PftC.E. Commission (Ed.), LBNL, 2006. Gillaspie, 2010, Metal oxide films for electrochromic applications: present technology and future directions, Mater. Chem., 20, 9585, 10.1039/c0jm00604a J. Bechtel, K. Isono, S. Lounis, C. W., Cleantech to market: Electrochromic Coating For Dynamic Control, 2011. D.-R. Roberts, Preliminary Assessment of the Energy-Saving Potential of Electrochromic Windows in Residential Buildings, in, 2009, pp. 12. Granqvist, 1994, Electrochromic oxides: a band structure approach, Solar Energy Mater. Solar Cells, 32, 369, 10.1016/0927-0248(94)90100-7 E.S. Lee, S.E. Selkowitz, R.D. Clear, D.L. Di Bartolomeo, J.H. Klems, L.L. Fernandes, G.J. Ward, V. Inkarojrit, M. V., A Design Guide for Early- Market Electrochromic Windows, Berkeley, 2006. Llordes, 2011, Polyoxometalates and colloidal nanocrystals as building blocks for metal oxide nanocomposite films, J. Mater. Chem., 21, 11631, 10.1039/c1jm10514k Garcia, 2011, Dynamically modulating the surface plasmon resonance of doped semiconductor nanocrystals, Nano Lett., 11, 4415, 10.1021/nl202597n DeForest, 2013, Regional performance targets for transparent near-infrared switching electrochromic window glazings, Build. Environ., 61, 160, 10.1016/j.buildenv.2012.12.004 DeForest, 2015, United States energy and CO2 savings potential from deployment of near-infrared electrochromic window glazings, Build. Environ., 89, 107, 10.1016/j.buildenv.2015.02.021 Papaefthimiou, 2001, Advanced electrochromic devices based on WO3 thin films, Electrochim. Acta, 46, 2145, 10.1016/S0013-4686(01)00393-0 Syrrakou, 2005, Environmental assessment of electrochromic glazing production, Sol. Energy Mater. Sol. Cells, 85, 205, 10.1016/j.solmat.2004.03.005 Syrrakou, 2006, Eco-efficiency evaluation of a smart window prototype, Sci. Total Environ., 359, 267, 10.1016/j.scitotenv.2005.10.023 Papaefthimiou, 2006, Energy performance assessment of an electrochromic window, Thin Solid Films, 502, 257, 10.1016/j.tsf.2005.07.294 Mitzi, 2009 Posset, 2012, Environmental assessment of electrically controlled variable light transmittance devices, RSC Adv., 2, 5990, 10.1039/c2ra20148h R.L. Moss, E. T., H. Kara, P. Willis, J. Kooroshy, Critical Metals in Strategic Energy Technologies, JRC scientific and Technical Reports, European Commission Joint Research Centre Institute. Indium-Corporation, Indium Gallium & Germanium. Supply & Price outlook, 2010. Ecorys, Final Report Client: European Commission-DG Environment Rotterdam-Mapping resource prices: the past and the future, 2012. Krebs, 2009, Fabrication and processing of polymer solar cells: a review of printing and coating techniques, Solar Energy Mater. Solar Cells, 93, 394, 10.1016/j.solmat.2008.10.004 Espinosa, 2012, Life cycle assessment of ITO-free polymer solar cell prepared by roll-to-roll coating and printing, Solar Energy Mater. Solar Cells, 97, 3, 10.1016/j.solmat.2011.09.048 Garcia-Valverde, 2010, Life cycle analysis of organic photovoltaic technologies, Prog. Photovolt.: Res. Appl., 18, 535, 10.1002/pip.967 Espinosa, 2011, A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions, Solar Energy Mater. Solar Cells, 95, 1293, 10.1016/j.solmat.2010.08.020 Llordes, 2013, Tunable near-infrared and visible-light transmittance in nanocrystal-in-glass composites, Nature, 500, 323, 10.1038/nature12398 E.S. Lee, M. Yazdanian, S.E. S., Energy-savings potential of Electrochromic Windows in the US Commercial Building Sector, 2004. C. Baldassarri, F. Mathieux, F. Ardente, C. Wehmann, K. Deese, Integration of environmental aspects into R&D inter-organizational projects management: application of a life cycle-based method to the development of innovative windows, J. Clean. Prod. 112 (Part 4) (2016) 3388–3401. http://dx.doi.org/10.1016/j.jclepro.2015.09.044 PRé Consultants, M. Goedkoop, M. Oele, A. de Schryver, M. Vieira, SimaPro 7 Database Manual Methods Library, 2008. Kellenberger, 2007 Hischier, 2007 H.-J. Althaus, M. Chudacoff, R. Hischier, N. Jungbluth, M. Osses, A. P., Life Cycle Inventories of Chemicals. Final Report Ecoinvent Data v2.0 N.8, 2007. Classen, 2009 Hischier, 2007 Model: DJW Series Horizontal Magnetron Sputtering Production Line for Glass Coating. 〈www.fdsglass.com〉 T. Gutowsky, J. Dumas, A. T., Electrical energy requirements for manufacturing processes, in: Proceedings of the 13th CIRP International Conference on Life Cycle Engineering. May 31st–June 2nd, 2006, Leuven, 2006. An example of a commercially available roll coating platform for R2R applications. 〈www.solarcoating.de〉. Meyer, 2009, En examination of existing data for the industrial manufacture and use of nanocomponents and their role in the life cycle impact of nanoproduct, Environ. Sci. Technol., 43, 1256, 10.1021/es8023258 Søndergaard, 2012, Roll-to-roll fabrication of polymer solar cells, Materials Today, 15, 36, 10.1016/S1369-7021(12)70019-6 I.C.M.U.G. Design, Economic Input-Output Life Cycle Assessment (EIO-LCA), US 1997 Industry Benchmark model, 2008. 〈http://www.eiolca.net〉. Asdrubali, 2013, Influence of cavities geometric and emissivity properties on the overall thermal performance of aluminum frames for windows, Energy Build., 60, 298, 10.1016/j.enbuild.2013.01.028 Stichnothe, 2013, Life cycle assessment of recycling PVC window frames, Resour. Conserv. Recycl., 71, 40, 10.1016/j.resconrec.2012.12.005 Baldinelli, 2014, Energy and environmental performance optimization of windows: a holistic approach, Energy Build., 79, 114, 10.1016/j.enbuild.2014.05.010 Hischier, 2012, Life cycle assessment of engineered nanomaterials: state of the art and strategies to overcome existing gaps, Sci. Total Environ., 425, 271, 10.1016/j.scitotenv.2012.03.001