Energy absorption during compression and impact of dry elastic-plastic spherical granules

Achenbach J.D.: Wave Propagation in Elastic Solids. Elsevier, New York (1987)

Adams M.J., Briscoe B.J., Sinha S.K.: An indentation study of an elastoviscoplastic material. Philos. Mag. A 74, 1225–1233 (1996)

Adams M.J., Lawrence C.J., Ursob M.E.D., Rance J.: Modelling collisions of soft agglomerates at the continuum length scale. Powder Technol. 140, 268–279 (2004)

Agniel, Y.: Bedeutung der Einzelgranalieneigenschaften zur Defektvermeidung in trockengepressten keramischen Modellpulvern. Doctoral dissertation, University of Karlsruhe (1992)

Antonyuk, S.: Deformations- und Bruchverhalten von kugelförmigen Granulaten bei Druck- und Stoßbeanspruchung. Doctoral Dissertation, University of Magdeburg, Docupoint Publishers (2006)

Antonyuk S., Khanal M., Tomas J., Heinrich S., Mörl L.: Impact breakage of spherical granules: experimental study and DEM simulation. Chem. Eng. Process. 45, 838–856 (2006)

Backhaus G.: Deformationsgesetze. Akademie-Verlag, Berlin (1983)

Balevičius, R., Kačianauskas, R., Mroz, Z., Sielamowicz, I.: Discrete element method applied to multiobjective optimization of discharge flow parameters in hoppers. In: Structural and Multidisciplinary Optimization, pp. 163–175. Springer, London (2006)

Baskaran A., Dufty J.W., Brey J.J.: Transport coefficients for the hard-sphere granular fluid. Phys. Rev. E 77, 3 (2008)

Beekman W.J., Meesters G.M.H., Becker T., Gaertner A., Gebert M., Scarlett B.: Failure mechanism determination for industrial granules using a repeated compression test. Powder Technol. 130, 367–376 (2003)

Brilliantov N.V., Spahn F., Hertzsch J.-M., Pöschel T.: Model for collision in granular gases. Phys. Rev. E 53, 5 (1996)

Buchholtz V., Pöschel T., Tillemans H.J.: Simulation of rotating drum experiments using noncircular particles. Phys. A 216, 199–212 (1995)

Buchholtz, V.: Molekulardynamische Untersuchungen granularer Stoffe. Doctoral dissertation, Humboldt-University zu Berlin (1994)

Carey W.F., Bosanquet C.H.: A study of crushing brittle solids. J. Soc. Glass Technol. 17, 384–411 (1933)

Chandramohan R., Powell M.S.: Measurement of particle interaction properties for incorporation in the discrete element method simulation. Miner. Eng. 18, 1142–1151 (2005)

Coaplen J., Stronge W.J., Ravani B.: Work equivalent composite coefficient of restitution. Int. J. Impact Eng. 30, 581–591 (2004)

Davies R.M.: Determination of static and dynamic yield stresses using a steel ball. Proc. R. Soc. Lond. A 197(1050), 416–432 (1949)

Dong H., Moys M.H.: Experimental study of oblique impacts with initial spin. Powder Technol. 161, 22–31 (2006)

Fischer-Cripps A.C.: Introduction to Contact Mechanics. Springer, Berlin (2000)

Foerster S.F., Louge M.Y., Chang H., Allia K.: Measurements of the collision properties of small spheres. Phys. Fluids 6(3), 1108–1115 (1994)

Fu J.S., Cheong Y.S., Reynolds G.K., Adams M.J., Salman A.D., Hounslow M.J.: Impact deformation and rebound of wet granules, an experimental study of the variability in the properties and quality of wet granules. Powder Technol. 140, 209–216 (2004)

Goldhirsch I.: Rapid granular flows. Annu. Rev. Fluid Mech. 35, 267–293 (2003)

Goldsmith W.: Impact: The Theory and Physical Behavior of Colliding Solids. Edward Arnold Ltd, London (1960)

Grof Z., Kohout M., Štĕpánek F.: Multi-scale simulation of needle-shaped particle breakage under uniaxial compaction. Chem. Eng. Sci. 62, 1418–1429 (2007)

Gröger T., Tüzün U., Heyes D.M.: Modelling and measuring of cohesion in wet granular materials. Powder Technol. 133, 203–215 (2003)

Guoping L., Thornton C., Adams M.J.: Discrete particle simulation of agglomerate impact coalescence. Chem. Eng. Sci. 53, 3381–3391 (1988)

Gyenis J., Ulbert Z.s., Szépvölgyi J., Tsuji Y.: Discrete particle simulation of flow regimes in bulk solids mixing and conveying. Powder Technol. 104, 248–257 (1999)

Hagedorn P.: Technische Mechanik. Bd. 2. Festigkeitslehre. Harri Deutsch Publishers, Frankfurt am Main, Thun (1995)

Hassanpour A., Antony S.J., Ghadiri M.: Effect of size ratio on the behaviour of agglomerates embedded in a bed of particles subjected to shearing: DEM analysis. Chem. Eng. Sci. 62, 935–942 (2007)

Hertz H.: Über die Berührung fester elastischer Körper. J. die reine und angewandte Mathematik 92, 156–171 (1882)

Hoomans B.P.B., Kuipers J.A.M., Briels W.J., Swaaij van W.P.M.: Discrete particle simulation of bubble and slug formation in a two-dimensional gas-fluidised bed: a hard-sphere approach. Chem. Eng. Sci. 51, 99–118 (1996)

Huang H., Dallimore M.P., Pan J., McCormick P.G.: An investigation of the effect of powder on the impact characteristics between a ball and a plate using free falling experiments. Mat. Sci. Eng. A 241, 38–47 (1998)

Hunter S.C.: Energy adsorbed by elastic waves during impact. J. Mech. Phys. Solids 5, 162–171 (1956)

Iveson S.M., Litster J.D.: Liquid-bound granule impact deformation and coefficient of restitution. Powder Technol. 99, 234–242 (1998)

Iwashita K., Oda M.: Micro-deformation mechanism of shear banding process based on modified distinct element method. Powder Technol. 109, 192–205 (2000)

Iwashita K., Tarumi Y., Casaverde L., Uemura D., Meguro K., Hakuno M.: Granular assembly simulation for ground collapse. In: Satake, M., Jenkins, J.T. (eds) Micromechanics of Granular Materials, pp. 125–132. Elsevier, Amsterdam (1988)

Jenkins J.T., Richman M.W.: Plane simple shear of smooth inelastic circular disks: the anisotropy of the second moment in the dilute and dense limits. J. Fluid Mech. 171, 53–69 (1986)

Johnson K.L.: Contact Mechanics. Cambridge University Press, Cambridge (1985)

Johnson K.L., Pollock H.M.: The role of adhesion in the impact of elastic spheres. J. Adhes. Sci. Technol. 8(11), 1323–1332 (1994)

Kafui K.D., Thornton C., Adams M.J.: Discrete particle-continuum fluid modelling of gas-solid fluidised beds. Chem. Eng. Sci. 57, 2395–2410 (2002)

Kaneko Y., Shiojima T., Horio M.: DEM simulation of fluidized beds for gas-phase olefin polymerization. Chem. Eng. Sci. 54, 5809–5821 (1999)

Kantak A.A., Davis R.H.: Collisions of spheres with wet and dry porous layers on a solid wall. Chem. Eng. Sci. 61, 417–427 (2006)

Kaskas, A.A.: Schwarmgeschwindigkeit in Mehrkornsuspensionen am Beispiel der Sedimentation. Doctoral dissertation, Technical University of Berlin (1970)

Kawaguchi T., Sakamoto M., Tanaka T., Tsuji Y.: Quasi-three-dimensional numerical simulation of spouted beds in cylinder. Powder Technol. 109, 3–12 (2000)

Khanal, M.: Simulation of crushing dynamics of an aggregate-matrix composite by compression and impact stressings. Doctoral dissertation, University of Magdeburg, Docupoint Publishers (2005)

Kharaz A.H., Gorham D.A., Salman A.D.: An experimental study of the elastic rebound of spheres. Powder Technol. 120, 281–291 (2001)

Kishino Y.: Disc model analysis of granular media. In: Satake, M., Jenkins, J.T. (eds) Micromechanics of Granular Materials, pp. 143–152. Elsevier, Amsterdam (1988)

Koller, M.G.: Elastischer Stoss von Kugeln auf dicke Platten. Doctoral disseratation, ETH Zürich (1983)

Konietzky, H.: Numerische simulation in der Geomechanik mittels expliziter Verfahren. Doctoral dissirtation, Technical University Bergakademie Freiberg, Freiberg (2001)

Kruggel-Emden H., Simsek E., Rickelt S., Wirtz S., Scherer V.: Review and extension of normal force models for the discrete element method. Powder Technol. 171, 157–173 (2006)

Krupp H., Sperling G.: Haftung kleiner Teilchen an Feststoffen—Teil II: Theorie. Zeitschrift für angewandte Mathematik und Physik 19, 259–265 (1965)

Kuo H.P., Knight P.C., Parker D.J., Tsuji Y., Adams M.J., Seville J.P.K.: The influence of DEM simulation parameters on the particle behaviour in a V-mixer. Chem. Eng. Sci. 57, 3621–3638 (2002)

Kuwabara G., Kono K.: Restitution coefficient in a collision between two spheres. Jpn. J. Appl. Phys. 26, 1230–1233 (1987)

Kwapinska M., Saage G., Tsotsas E.: Mixing of particles in rotary drums: a comparison of discrete element simulations with experimental results and penetration models for thermal processes. Powder Technol. 161, 69–78 (2006)

Labous L., Rosato A.D., Dave R.N.: Measurements of collisional properties of spheres using high-speed video analysis. Phys. Rev. E 56(5, B), 5717–5725 (1997)

Landau L.D., Lifschitz E.M.: Theoretische Physik. Band VII: Elastizitätstheorie. Fizmatlit, Moskau (2001)

Li, J.: Euler-Lagrange simulation of flow structure formation and evolution in dense gas-solid flows. PhD thesis, University of Twente, Enschede (2003)

Link J.M., Cuypers L.A., Deen N.G., Kuipers J.A.M.: Flow regimes in a spout—fluid bed: a combined experimental and simulation study. Chem. Eng. Sci. 60, 3425–3442 (2005)

Lorenz A., Tuozzolo C., Louge M.Y.: Measurements of impact properties of small, nearly spherical particles. Exp. Mech. 37, 292–298 (1997)

Louge M.Y, Adams M.E.: Anomalous behavior of normal kinematic restitution in the oblique impacts of a hard sphere on an elastoplastic plate. Physical Rev. E 65, 021303 (2002)

Luding S.: Molecular dynamics simulations of granular materials. In: Hinrichsen, H., Wolf, D. (eds) Physics of Granular Media, pp. 299–324. Wiley-VCH, Berlin (2004)

Lun C.K.K., Savage S.B., Jeffrey D.J., Chepurniy N.: Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfield. J. Fluid Mech. 140, 189–222 (1984)

Lungfiel, A.: Ermittlung von Belastungsgrößen mittels der Diskrete-Elemente-Methode für die Auslegung von Sturzmühlen. Doctoral dissertation, Technical University Bergakademie Freiberg, Freiberg (2002)

Mangwandi C., Cheong Y.S., Adams M.J., Hounslow M.J., Salman A.D.: The coefficient of restitution of different representative types of granules. Chem. Eng. Sci. 62, 437–450 (2007)

Matuttis H.G., Luding S., Herrmann H.J.: Discrete element simulations of dense packings and heaps made of spherical and non-spherical particles. Powder Technol. 109, 278–292 (2000)

Moreno-Atanasio R., Xu B.H., Ghadiri M.: Computer simulation of the effect of contact stiffness and adhesion on the fluidization behaviour of powders. Chem. Eng. Sci. 62, 184–194 (2007)

Ning Z., Ghadiri M.: Distinct element analysis of attrition of granular solids under shear deformation. Chem. Eng. Sci. 61, 5991–6001 (2006)

Odagi, K., Tanaka, T., Yamane, K.: DEM simulation of compression test of particles. In: Proceedings of World Congress on Particle Technology, Vol 4, Sydney (2002)

Piechatzek, T., Kwade, A.: DEM-Approach for numerical investigation of grinding media motion in stirred media mills. In: Book of Abstracts, 13.4, PARTEC 2007, International Congress on Particle Technology, Nürnberg (2007)

Pisarenko, G.S., Agarev, V.A., Kvitka, A.L., Popkov, V.G., Umanskii, E.S.: Strength of Materials. Vischa schkola, Kiev (1986)

Pitchumani R., Meesters G.M.H., Scarlett B.: Breakage behaviour of enzyme granules in a repeated impact test. Powder Technol. 130, 421–427 (2003)

Pöschel T., Brilliantov N.V.: Extremal collision sequences of particles on a line: Optimal transmission of kinetic energy. Phys. Rev. E 63, 021505 (2001)

Pöschel T., Luding S.: Granular Gases. Springer, New York (2000)

Pöschel T., Schwager T.: Computational Granular Dynamics, Models and Algorithms. Springer, New York (2005)

Pouyet J., Lataillade J.L.: Dynamic investigation of hard viscoelastic materials by ball bouncing experiments. J. Mat. Sci. 10, 2112–2116 (1975)

Riehle M., Simmchen E.: Grundlagen der Werkstofftechnik. Deutscher Verlag für Grundstoffindustrie, Stuttgart (2002)

Rumpf H.: Die Einzelkornzerkleinerung als Grundlage einer technischen Zerkleinerungswissenschaft. Chemie Ingenieur Technik 37, 187–202 (1965)

Samimi A., Hassanpour A., Ghadiri M.: Single and bulk compressions of soft granules: experimental study and DEM evaluation. Chem. Eng. Sci. 60, 3993–4004 (2005)

Schäfer J., Dippel S., Wolf D.E.: Force schemes in simulations of granular materials. J. de Physique I 6(1), 5–20 (1996)

Schönert, K.: Einzelkorn-Druckzerkleinerung und Zerkleinerungskinetik, Untersuchungen an Kalkstein-, Quarz-, und Zementklinkerkörnern des Größenbereiches 0,1 bis 3 mm. Doctoral dissertation, University of Karlsruhe (1966)

Schubert H.: Handbuch der Mechanischen Verfahrenstechnik. Bd. 1. Wiley, Weinheim (2003)

Schubert W., Khanal M., Tomas J.: Impact crushing of particle–particle compounds—experiment and simulation. Int. J. Min. Process. 75, 41–52 (2005)

Seifried R., Schiehlen W., Eberhard P.: Numerical and experimental evaluation of the coefficient of restitution for repeated impacts. Int. J. Impact Eng. 32, 508–524 (2005)

Sheng Y., Briscoe B.J., Maung R., Rovea C.: Compression of polymer bound alumina agglomerates at the micro deformation scale. Powder Technol. 140, 228–239 (2004)

Sommerfeld M., Huber N.: Experimental analysis and modelling of particle-wall collisions. Int. J. Multip. Flow 25, 1457–1489 (1999)

Stevens A.B., Hrenya C.M.: Comparison of soft-sphere models to measurements of collision properties during normal impacts. Powder Technol. 154, 99–109 (2005)

Stoianovici D., Harmuzlu Y.: A critical study of the applicability of rigid-body collision theory. J. Appl. Mech. 63, 307–316 (1996)

Stronge W.J.: Impact Mechanics. Cambridge University Press, Cambridge (2000)

Szabó I.: Höhere technische Mechanik. Springer, Berlin (2001)

Takeuchi S., Wang S., Rhodes M.: Discrete element simulation of a flat-bottomed spouted bed in the 3-D cylindrical coordinate system. Chem. Eng. Sci. 59, 3495–3504 (2004)

Targ S.M.: Short Course of Theoretical Mechanics. Nauka, Moscow (1966)

Tavares L.M., King R.P.: Modeling of particle fracture by repeated impacts using continuum damage mechanics. Powder Technol. 123, 138–146 (2002)

Thornton C.: Coefficient of restitution of collinear collisions of elastic-perfectly plastic spheres. J. Appl. Mech. 64, 383–386 (1997)

Thornton C., Ning Z.: A theoretical model for the stick/bounce behaviour of adhesive, elastic-plastic spheres. Powder Technol. 99, 154–162 (1998)

Thornton C., Ciomocos M.T., Adams M.J.: Numerical simulations of diametrical compression tests on agglomerates. Powder Technol. 140, 258–267 (2004)

Tomas J.: Particle adhesion fundamentals and bulk powder consolidation. KONA-Powder Particle 18, 157–169 (2000)

Tomas J.: Assessment of mechanical properties of cohesive particulate solids—part 1: particle contact constitutive model. Part. Sci. Technol. 19(2), 95–110 (2001)

Tomas J.: Adhesion of ultrafine particles—a micromechanical approach. Chem. Eng. Sci. 62, 1997–2010 (2007)

Tomas J.: Adhesion of ultrafine particles—energy absorption at contact. Chem. Eng. Sci. 62, 5925–5939 (2007)

Tomas J.: Mechanics of Particle Adhesion. Manuscript, Magdeburg (2008)

Tsuji Y., Tanaka T., Ishida T.: Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe. Powder Technol. 71, 239–250 (1992)

Tsuji Y., Kawaguchi T., Tanaka T.: Discrete particles simulation of 2-dimensional fluidized bed. Powder Technol. 77, 79–87 (1993)

Tykhoniuk R., Tomas J., Luding S., Kappl M., Heim L., Butt H-J.: Ultrafine cohesive powders: from interparticle contacts to continuum behaviour. Chem. Eng. Sci. 62, 2843–2865 (2007)

van Buijtenen M.S., Deen N.G., Heinrich S., Antonyuk S., Kuipers J.A.M.: A discrete element study of wet particle-particle interaction during granulation in a spout fluidized bed. Can. J. Chem. Eng. 9999, 1–10 (2009)

Venugopal R., Rajamani R.K.: 3D simulation of charge motion in tumbling mills by the discrete element method. Powder Technol. 115, 157–166 (2001)

Walton O.R., Braun R.L.: Viscosity, granular-temperature, and stress calculations for shearing assemblies of inelastic, frictional disks. J. Rheol. 30, 949–980 (1986)

Walton O.R., Braun R.L., Mallon R.G., Gervelli D.M.: Particle-dynamics calculations of gravity flow of inelastic, frictional spheres. In: Satake, M., Jenkins, J.T. (eds) Micromechanics of Granular Materials, pp. 153–161. Elsevier Science Publishers B.V., Amsterdam (1988)

Weir G., Tallon S.: The coefficient of restitution for normal incident, low velocity particle impacts. Chem. Eng. Sci. 60, 3637–3647 (2005)

Wu C., Li L., Thornton C.: Rebound behaviour of spheres for plastic impacts. Int. J. Impact Eng. 28, 929–946 (2003)

Ye M., van der Hoef M.A., Kuipers J.A.M.: A numerical study of fluidization behavior of Geldart A particles using a discrete particle model. Powder Technol. 139, 129–139 (2004)

Zhang Z.P., Liu L.F., Yuan Y.D., Yu A.B: A simulation study of the effects of dynamic variables on the packing of spheres. Powder Technol. 116, 23–32 (2001)

Zhou H., Flamant G., Gauthier D.: DEM-LES of coal combustion in a bubbling fluidized bed. Part I: gas-particle turbulent flow structure. Chem. Eng. Sci. 59, 4193–4203 (2004)

Ziegler F.: Technische Mechanik der festen und flüssigen Körper. Springer, Wien (1985)

Zippelius A.: Granular gases. Physica A 369(1), 143–158 (2006)