Emerging Atomic Layer Deposition for the Development of High-Performance Lithium-Ion Batteries
Tóm tắt
Từ khóa
Tài liệu tham khảo
Ding, Y.L., Cano, Z.P., Yu, A.P., et al.: Automotive Li-ion batteries: current status and future perspectives. Electrochem. Energy Rev. 2, 1–28 (2019). https://doi.org/10.1007/s41918-018-0022-z
Singh, K.V., Bansal, H.O., Singh, D.: A comprehensive review on hybrid electric vehicles: architectures and components. J. Mod. Transp. 27, 77–107 (2019). https://doi.org/10.1007/s40534-019-0184-3
Laadjal, K., Cardoso, A.J.M.: Estimation of lithium-ion batteries state-condition in electric vehicle applications: issues and state of the art. Electronics 10, 1588 (2021). https://doi.org/10.3390/electronics10131588
Solyali, D., Safaei, B., Zargar, O., et al.: A comprehensive state-of-the-art review of electrochemical battery storage systems for power grids. Int. J. Energy Res. 46, 17786–17812 (2022). https://doi.org/10.1002/er.8451
Notter, D.A., Gauch, M., Widmer, R., et al.: Contribution of Li-ion batteries to the environmental impact of electric vehicles. Environ. Sci. Technol. 44, 6550–6556 (2010). https://doi.org/10.1021/es903729a
Peters, J.F., Baumann, M., Zimmermann, B., et al.: The environmental impact of Li-ion batteries and the role of key parameters: a review. Renew. Sustain. Energy Rev. 67, 491–506 (2017). https://doi.org/10.1016/j.rser.2016.08.039
Liu, M., Wang, C., Zhao, C.L., et al.: Quantification of the Li-ion diffusion over an interface coating in all-solid-state batteries via NMR measurements. Nat. Commun. 12, 5943 (2021). https://doi.org/10.1038/s41467-021-26190-2
Duan, J., Tang, X., Dai, H., et al.: Building safe lithium-ion batteries for electric vehicles: a review. Electrochem. Energy Rev. 31(3), 1–42 (2019). https://doi.org/10.1007/S41918-019-00060-4
Johnson, R.W., Hultqvist, A., Bent, S.F.: A brief review of atomic layer deposition: from fundamentals to applications. Mater. Today 17, 236–246 (2014). https://doi.org/10.1016/j.mattod.2014.04.026
Suntola, T.: Atomic layer epitaxy. Mater. Sci. Rep. 4, 261–312 (1989). https://doi.org/10.1016/S0920-2307(89)80006-4
Lin, S.X., Shi, X.Z., Zhang, X., et al.: Ternary semiconductor compounds CuInS2 (CIS) thin films synthesized by electrochemical atomic layer deposition (EC-ALD). Appl. Surf. Sci. 256, 4365–4369 (2010). https://doi.org/10.1016/j.apsusc.2010.02.032
Shin, J.W., Oh, S., Lee, S., et al.: ALD CeO2-coated Pt anode for thin-film solid oxide fuel cells. Int. J. Hydrog. Energy 46, 20087–20092 (2021). https://doi.org/10.1016/j.ijhydene.2021.03.133
Santasalo-Aarnio, A., Sairanen, E., Arán-Ais, R.M., et al.: The activity of ALD-prepared PtCo catalysts for ethanol oxidation in alkaline media. J. Catal. 309, 38–48 (2014). https://doi.org/10.1016/j.jcat.2013.08.027
La Zara, D., Zhang, F.W., Sun, F.L., et al.: Drug powders with tunable wettability by atomic and molecular layer deposition: From highly hydrophilic to superhydrophobic. Appl. Mater. Today 22, 100945 (2021). https://doi.org/10.1016/j.apmt.2021.100945
Wei, B., Chen, H.M., Hua, W.Q., et al.: Formation mechanism and photoelectric properties of Al2O3 film based on atomic layer deposition. Appl. Surf. Sci. 572, 151419 (2022). https://doi.org/10.1016/j.apsusc.2021.151419
Lee, S.Y., Park, D., Yoon, B.S., et al.: Atomic layer deposition-based synthesis of TiO2 and Al2O3 thin-film coatings on nanoparticle powders for sodium-ion batteries with enhanced cyclic stability. J. Alloys Compd. 897, 163113 (2022). https://doi.org/10.1016/j.jallcom.2021.163113
Wan, X.K., Xu, Y.B., Wang, X.Y., et al.: Atomic layer deposition assisted surface passivation on bismuth vanadate photoanodes for enhanced solar water oxidation. Appl. Surf. Sci. 573, 151492 (2022). https://doi.org/10.1016/j.apsusc.2021.151492
Urbanová, V., Plutnar, J., Pumera, M.: Atomic layer deposition of electrocatalytic layer of MoS2 onto metal-based 3D-printed electrode toward tailoring hydrogen evolution efficiency. Appl. Mater. Today 24, 101131 (2021). https://doi.org/10.1016/j.apmt.2021.101131
Sundberg, P., Karppinen, M.: Organic and inorganic–organic thin film structures by molecular layer deposition: a review. Beilstein J. Nanotechnol. 5, 1104–1136 (2014). https://doi.org/10.3762/bjnano.5.123
Bazito, F.F.C., Torresi, R.M.: Cathodes for lithium ion batteries: the benefits of using nanostructured materials. J. Braz. Chem. Soc. 17, 627–642 (2006). https://doi.org/10.1590/s0103-50532006000400002
Ren, Y., Yin, X.C., Xiao, R., et al.: Layered porous silicon encapsulated in carbon nanotube cage as ultra-stable anode for lithium-ion batteries. Chem. Eng. J. 431, 133982 (2022). https://doi.org/10.1016/j.cej.2021.133982
Zhao, Y., Zheng, K., Sun, X.L.: Addressing interfacial issues in liquid-based and solid-state batteries by atomic and molecular layer deposition. Joule 2, 2583–2604 (2018). https://doi.org/10.1016/j.joule.2018.11.012
Imachi, N., Nakamura, H., Fujitani, S., et al.: Insertion of an insulating layer between cathode and separator for improving storage characteristics of Li-ion batteries. J. Electrochem. Soc. 159, A269–A272 (2012). https://doi.org/10.1149/2.070203jes
Zhou, Q.B., Wang, L.L., Li, W.Y., et al.: Sodium superionic conductors (NASICONs) as cathode materials for sodium-ion batteries. Electrochem. Energy Rev. 4, 793–823 (2021). https://doi.org/10.1007/s41918-021-00120-8
Deng, Z., Mo, Y.F., Ong, S.P.: Computational studies of solid-state alkali conduction in rechargeable alkali-ion batteries. NPG Asia Mater. 8, e254 (2016). https://doi.org/10.1038/am.2016.7
Mishra, A., Mehta, A., Basu, S.M., et al.: Electrode materials for lithium-ion batteries. Mater. Sci. Energy Technol. 1, 182–187 (2018). https://doi.org/10.1016/j.mset.2018.08.001
Mauger, A., Julien, C.: Surface modifications of electrode materials for lithium-ion batteries: status and trends. Ionics 20, 751–787 (2014). https://doi.org/10.1007/s11581-014-1131-2
Stumpf, C.: Better batteries for a more sustainable world. Chemistry World, https://www.chemistryworld.com/sustainability/better-batteries-for-a-more-sustainable-world/4013747.article (2021). Accessed 4 April 2023
Reynolds, C.D., Slater, P.R., Hare, S.D., et al.: A review of metrology in lithium-ion electrode coating processes. Mater. Des. 209, 109971 (2021). https://doi.org/10.1016/j.matdes.2021.109971
Neudeck, S., Mazilkin, A., Reitz, C., et al.: Effect of low-temperature Al2O3 ALD coating on Ni-rich layered oxide composite cathode on the long-term cycling performance of lithium-ion batteries. Sci. Rep. 9, 5328 (2019). https://doi.org/10.1038/s41598-019-41767-0
Nisar, U., Muralidharan, N., Essehli, R., et al.: Valuation of surface coatings in high-energy density lithium-ion battery cathode materials. Energy Storage Mater. 38, 309–328 (2021). https://doi.org/10.1016/j.ensm.2021.03.015
Mao, J., Ma, M.Z., Liu, P.P., et al.: The effect of cobalt doping on the morphology and electrochemical performance of high-voltage spinel LiNi0.5Mn1.5O4 cathode material. Solid State Ion. 292, 70–74 (2016). https://doi.org/10.1016/j.ssi.2016.05.008
Gao, Y., Xiong, K., Zhang, H.D., et al.: Effect of Ru doping on the properties of LiFePO4/C cathode materials for lithium-ion batteries. ACS Omega 6, 14122–14129 (2021). https://doi.org/10.1021/acsomega.1c00595
Kalaf, O., Solyali, D., Asmael, M., et al.: Experimental and simulation study of liquid coolant battery thermal management system for electric vehicles: a review. Int. J. Energy Res. 45, 6495–6517 (2021). https://doi.org/10.1002/er.6268
Nisar, U., Petla, R., Ahmad Jassim Al-Hail, S., et al.: Impact of surface coating on electrochemical and thermal behaviors of a Li-rich Li1.2Ni0.16Mn0.56Co0.08O2 cathode. RSC Adv. 10, 15274–15281 (2020). https://doi.org/10.1039/d0ra02060e
Pender, J.P., Jha, G., Youn, D.H., et al.: Electrode degradation in lithium-ion batteries. ACS Nano 14, 1243–1295 (2020). https://doi.org/10.1021/acsnano.9b04365
Qu, X.Y., Huang, H., Wan, T., et al.: An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes. Nano Energy 91, 106665 (2022). https://doi.org/10.1016/j.nanoen.2021.106665
Guan, P.Y., Zhou, L., Yu, Z.L., et al.: Recent progress of surface coating on cathode materials for high-performance lithium-ion batteries. J. Energy Chem. 43, 220–235 (2020). https://doi.org/10.1016/j.jechem.2019.08.022
Luo, X.J., Ben, L.B.: Effect of MgO and Ta2O5 co-coatings on electrochemical performance of high-voltage spinel LiNi0.5Mn1.5O4 cathode material. J. Alloys Compd. 810, 151951 (2019). https://doi.org/10.1016/j.jallcom.2019.151951
Darjazi, H., Rezvani, S.J., Brutti, S., et al.: Improvement of structural and electrochemical properties of NMC layered cathode material by combined doping and coating. Electrochim. Acta 404, 139577 (2022). https://doi.org/10.1016/j.electacta.2021.139577
Rajoba, S.J., Shirsat, A.N., Tyagi, D., et al.: Sol-gel assisted spinel Li4Ti5O12 and its performance and stability as anode for long life Li-ion battery. Mater. Lett. 285, 129134 (2021). https://doi.org/10.1016/j.matlet.2020.129134
Xu, H.M., Shen, H.J., Song, X.L., et al.: Hydrothermal synthesis of porous hydrangea-like MnCo2O4 as anode materials for high performance lithium ion batteries. J. Electroanal. Chem. 851, 113455 (2019). https://doi.org/10.1016/j.jelechem.2019.113455
Liu, D., Chen, L.C., Liu, T.J., et al.: An effective mixing for lithium ion battery slurries. Adv. Chem. Eng. Sci. 4, 515–528 (2014). https://doi.org/10.4236/aces.2014.44053
Hou, Q., Cao, G.Z., Wang, P., et al.: Carbon coating nanostructured-LiNi1/3Co1/3Mn1/3O2 cathode material synthesized by chemical vapor deposition method for high performance lithium-ion batteries. J. Alloys Compd. 747, 796–802 (2018). https://doi.org/10.1016/j.jallcom.2018.03.115
Smaldone, A., Brutti, S., De Bonis, A., et al.: Iron doped LiCoPO4 thin films for lithium-ion microbatteries obtained by ns pulsed laser deposition. Appl. Surf. Sci. 445, 56–64 (2018). https://doi.org/10.1016/j.apsusc.2018.03.168
Liu, J.S., Bai, X.J., Hao, J., et al.: Efficient liberation of electrode materials in spent lithium-ion batteries using a cryogenic ball mill. J. Environ. Chem. Eng. 9, 106017 (2021). https://doi.org/10.1016/j.jece.2021.106017
Wang, M.Y., Huang, Y., Wang, K., et al.: PVD synthesis of binder-free silicon and carbon coated 3D α-Fe2O3 nanorods hybrid films as high-capacity and long-life anode for flexible lithium-ion batteries. Energy 164, 1021–1029 (2018). https://doi.org/10.1016/j.energy.2018.09.046
Li, J.J., Shen, J., Li, Z.Q., et al.: Wet chemical route to the synthesis of kesterite Cu2ZnSnS4 nanocrystals and their applications in lithium ion batteries. Mater. Lett. 92, 330–333 (2013). https://doi.org/10.1016/j.matlet.2012.10.125
Tranquillo, E., Bollino, F.: Surface modifications for implants lifetime extension: an overview of sol-gel coatings. Coatings 10, 589 (2020). https://doi.org/10.3390/coatings10060589
Dahmen, K.H.: Chemical vapor deposition. In: Encyclopedia of physical science and technology, pp. 787–808. Elsevier, Amsterdam (2003). https://doi.org/10.1016/b0-12-227410-5/00102-2
George, S.M.: Atomic layer deposition: an overview. Chem. Rev. 110, 111–131 (2010). https://doi.org/10.1021/cr900056b
Meng, X.B.: Towards high-energy and durable lithium-ion batteries via atomic layer deposition: elegantly atomic-scale material design and surface modification. Nanotechnology 26, 020501 (2015). https://doi.org/10.1088/0957-4484/26/2/020501
O’Neill, B.J., Jackson, D.H.K., Lee, J., et al.: Catalyst design with atomic layer deposition. ACS Catal. 5, 1804–1825 (2015). https://doi.org/10.1021/cs501862h
Hossain, M.A., Khoo, K.T., Cui, X., et al.: Atomic layer deposition enabling higher efficiency solar cells: a review. Nano Mater. Sci. 2, 204–226 (2020). https://doi.org/10.1016/j.nanoms.2019.10.001
Pakkala, A., Putkonen, M.: Atomic layer deposition. In: Handbook of Deposition Technologies for Films and Coatings, pp. 364–391. Elsevier, Amsterdam (2010). https://doi.org/10.1016/b978-0-8155-2031-3.00008-9
Weimer, A.W.: Particle atomic layer deposition. J. Nanopart. Res. 21, 9 (2019). https://doi.org/10.1007/s11051-018-4442-9
Hirvikorpi, T., Vähä-Nissi, M., Nikkola, J., et al.: Thin Al2O3 barrier coatings onto temperature-sensitive packaging materials by atomic layer deposition. Surf. Coat. Technol. 205, 5088–5092 (2011). https://doi.org/10.1016/j.surfcoat.2011.05.017
Sivagurunathan, A.T., Adhikari, S., Kim, D.H.: Strategies and implications of atomic layer deposition in photoelectrochemical water splitting: recent advances and prospects. Nano Energy 83, 105802 (2021). https://doi.org/10.1016/j.nanoen.2021.105802
Tiurin, O., Solomatin, N., Auinat, M., et al.: Atomic layer deposition (ALD) of lithium fluoride (LiF) protective film on Li-ion battery LiMn1.5Ni0.5O4 cathode powder material. J. Power Sources 448, 227373 (2020). https://doi.org/10.1016/j.jpowsour.2019.227373
Dasgupta, N.P., Meng, X.B., Elam, J.W., et al.: Atomic layer deposition of metal sulfide materials. Acc. Chem. Res. 48, 341–348 (2015). https://doi.org/10.1021/ar500360d
Zhang, H., Hagen, D.J., Li, X., et al.: Atomic layer deposition of cobalt phosphide for efficient water splitting. Angew. Chem. Int. Ed. 59, 17172–17176 (2020). https://doi.org/10.1002/anie.202002280
Karg, M., Lokare, K.S., Limberg, C., et al.: Atomic layer deposition of silica on carbon nanotubes. Chem. Mater. 29, 4920–4931 (2017). https://doi.org/10.1021/acs.chemmater.7b01165
Tai, X., Li, X.F., Kakimov, A., et al.: Optimized ALD-derived MgO coating layers enhancing silicon anode performance for lithium ion batteries. J. Mater. Res. 34, 2425–2434 (2019)
Hwang, C.J.: ALD (atomic layer deposition) process technology in the semiconductor industry. Phys. High Technol. 21, 37–41 (2012). https://doi.org/10.3938/PHIT.21.006
Johnson, A.L., Parish, J.D.: Recent developments in molecular precursors for atomic layer deposition. In: Organometallic chemistry, pp. 1–53. Royal Society of Chemistry, Cambridge (2018). https://doi.org/10.1039/9781788010672-00001
Tiurin, O., Ein-Eli, Y.: A critical review: the impact of the battery electrode material substrate on the composition and properties of atomic layer deposition (ALD) coatings. Adv. Mater. Interfaces 6, 1901455 (2019). https://doi.org/10.1002/admi.201901455
Lee, Y., DuMont, J.W., George, S.M.: Trimethylaluminum as the metal precursor for the atomic layer etching of Al2O3 using sequential, self-limiting thermal reactions. Chem. Mater. 28, 2994–3003 (2016). https://doi.org/10.1021/acs.chemmater.6b00111
Meng, X.B., Yang, X.Q., Sun, X.L.: Emerging applications of atomic layer deposition for lithium-ion battery studies. Adv. Mater. 24, 1200397 (2012). https://doi.org/10.1002/adma.201200397
Tian, L., Bottala-Gambetta, I., Marchetto, V., et al.: Improved critical temperature of superconducting plasma-enhanced atomic layer deposition of niobium nitride thin films by thermal annealing. Thin Solid Films 709, 138232 (2020). https://doi.org/10.1016/j.tsf.2020.138232
Cai, J.Y., Han, X.X., Wang, X., et al.: Atomic layer deposition of two-dimensional layered materials: processes, growth mechanisms, and characteristics. Matter 2, 587–630 (2020). https://doi.org/10.1016/j.matt.2019.12.026
Charvot, J., Zazpe, R., Macak, J.M., et al.: Organoselenium precursors for atomic layer deposition. ACS Omega 6, 6554–6558 (2021). https://doi.org/10.1021/acsomega.1c00223
Hornsveld, N., Kessels, W.M.M., Creatore, M.: Mass spectrometry study of Li2CO3 film growth by thermal and plasma-assisted atomic layer deposition. J. Phys. Chem. C 123, 4109–4115 (2019). https://doi.org/10.1021/acs.jpcc.8b12216
Lee, J., Yoon, J., Kim, H.G., et al.: Highly conductive and flexible fiber for textile electronics obtained by extremely low-temperature atomic layer deposition of Pt. NPG Asia Mater. 8, e331 (2016). https://doi.org/10.1038/am.2016.182
Putkonen, M., Aaltonen, T., Alnes, M., et al.: Atomic layer deposition of lithium containing thin films. J. Mater. Chem. 19, 8767–8771 (2009). https://doi.org/10.1039/B913466B
Hämäläinen, J., Munnik, F., Hatanpää, T., et al.: Study of amorphous lithium silicate thin films grown by atomic layer deposition. J. Vac. Sci. Technol. A 30, 01A106 (2012). https://doi.org/10.1116/1.3643349
Østreng, E., Vajeeston, P., Nilsen, O., et al.: Atomic layer deposition of lithium nitride and carbonate using lithium silylamide. RSC Adv. 2, 6315–6322 (2012). https://doi.org/10.1039/C2RA20731A
Gregorczyk, K., Henn-Lecordier, L., Gatineau, J., et al.: Atomic layer deposition of ruthenium using the novel precursor bis(2, 6, 6-trimethyl-cyclohexadienyl)ruthenium. Chem. Mater. 23, 2650–2656 (2011). https://doi.org/10.1021/cm2004825
Niskanen, A., Hatanpää, T., Ritala, M., et al.: Thermogravimetric study of volatile precursors for chemical thin film deposition. Estimation of vapor pressures and source temperatures. J. Therm. Anal. Calorim. 64, 955–964 (2001)
Meng, X.B.: Atomic layer deposition of solid-state electrolytes for next-generation lithium-ion batteries and beyond: opportunities and challenges. Energy Storage Mater. 30, 296–328 (2020). https://doi.org/10.1016/j.ensm.2020.05.001
Yahya, M.Z.A., Arof, A.K.: Conductivity and X-ray photoelectron studies on lithium acetate doped chitosan films. Carbohydr. Polym. 55, 95–100 (2004). https://doi.org/10.1016/j.carbpol.2003.08.018
Huseynova, G., Shin, E.Y., Park, W.T., et al.: Lithium benzoate doped high performance n-type diketopyrrolopyrrole based organic thin-film transistors. Dyes Pigments 162, 243–248 (2019). https://doi.org/10.1016/j.dyepig.2018.10.032
Merchant, K.J.: Potassium trimethylsilanolate mediated hydrolysis of nitriles to primary amides. Tetrahedron Lett. 41, 3747–3749 (2000). https://doi.org/10.1016/S0040-4039(00)00482-2
Meng, X.B.: Atomic and molecular layer deposition in pursuing better batteries. J. Mater. Res. 36, 2–25 (2021)
Ren, Q.Q., Yuan, Y.F., Wang, S.: Interfacial strategies for suppression of Mn dissolution in rechargeable battery cathode materials. ACS Appl. Mater. Interfaces (2021). https://doi.org/10.1021/acsami.1c20406
Li, X.F., Liu, J., Banis, M.N., et al.: Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application. Energy Environ. Sci. 7, 768–778 (2014). https://doi.org/10.1039/C3EE42704H
Put, B., Mees, M.J., Hornsveld, N., et al.: Plasma-assisted ALD of LiPO(N) for solid state batteries. J. Electrochem. Soc. 166, A1239–A1242 (2019). https://doi.org/10.1149/2.1191906jes
ForgeNano: ALD enabled batteries: making batteries better with particle atomic layer deposition with downloadable whitepaper. https://forgenano.com/ald-enabled-batteries-making-batteries-better-with-particle-atomic-layer-deposition-with-downloadable-whitepaper/
Song, J., Han, X.G., Gaskell, K.J., et al.: Enhanced electrochemical stability of high-voltage LiNi0.5Mn1.5O4 cathode by surface modification using atomic layer deposition. J. Nanoparticle Res. 16, 1–8 (2014). https://doi.org/10.1007/s11051-014-2745-z
Guan, C., Wang, J.: Recent development of advanced electrode materials by atomic layer deposition for electrochemical energy storage. Adv. Sci. 3, 1500405 (2016). https://doi.org/10.1002/advs.201500405
Mohanty, D., Dahlberg, K., King, D.M., et al.: Modification of Ni-rich FCG NMC and NCA cathodes by atomic layer deposition: preventing surface phase transitions for high-voltage lithium-ion batteries. Sci. Rep. 6, 26532 (2016). https://doi.org/10.1038/srep26532
Jung, Y.S., Lu, P., Cavanagh, A.S., et al.: Unexpected improved performance of ALD coated LiCoO2/graphite Li-ion batteries. Adv. Energy Mater. 3, 213–219 (2013). https://doi.org/10.1002/aenm.201200370
Gao, Y., Yu, H., Sandineni, P., et al.: Fe doping in LiMn1.5Ni0.5O4 by atomic layer deposition followed by annealing: depths and occupation sites. J. Phys. Chem. C 125, 7560–7567 (2021). https://doi.org/10.1021/acs.jpcc.1c00225
Dou, F., Shi, L.Y., Chen, G.R., et al.: Silicon/carbon composite anode materials for lithium-ion batteries. Electrochem. Energy Rev. 2, 149–198 (2019)
Dahlberg, K., Trevey, J.E., Dameron, A., et al.: ALD-coated graphite anode materials for improved cycle life, calendar life, and safety of Li-ion cells. ECS Meet. Abstr. MA2017–02, 116 (2017). https://doi.org/10.1149/ma2017-02/1/116
Snyder, M.Q., Trebukhova, S.A., Ravdel, B., et al.: Synthesis and characterization of atomic layer deposited titanium nitride thin films on lithium titanate spinel powder as a lithium-ion battery anode. J. Power Sources 165, 379–385 (2007). https://doi.org/10.1016/j.jpowsour.2006.12.015
Memarzadeh Lotfabad, E., Kalisvaart, P., Cui, K., et al.: ALD TiO2 coated silicon nanowires for lithium ion battery anodes with enhanced cycling stability and coulombic efficiency. Phys. Chem. Chem. Phys. 15, 13646–13657 (2013). https://doi.org/10.1039/c3cp52485j
Yesibolati, N., Shahid, M., Chen, W., et al.: SnO2 anode surface passivation by atomic layer deposited HfO2 improves Li-ion battery performance. Small 10, 2849–2858 (2014). https://doi.org/10.1002/smll.201303898
Lu, Y., Zhang, Y.D., Zhang, Q., et al.: Recent advances in Ni-rich layered oxide particle materials for lithium-ion batteries. Particuology 53, 1–11 (2020). https://doi.org/10.1016/j.partic.2020.09.004
Liu, T.C., Yu, L., Lu, J., et al.: Rational design of mechanically robust Ni-rich cathode materials via concentration gradient strategy. Nat. Commun. 12, 6024 (2021). https://doi.org/10.1038/s41467-021-26290-z
Julien, C.M., Mauger, A.: NCA, NCM811, and the route to Ni-richer lithium-ion batteries. Energies 13, 6363 (2020). https://doi.org/10.3390/en13236363
Lu, W., Liang, L.W., Sun, X., et al.: Recent progresses and development of advanced atomic layer deposition towards high-performance Li-ion batteries. Nanomaterials (Basel) 7, 325 (2017). https://doi.org/10.3390/nano7100325
Eftekhari, A.: Aluminum oxide as a multi-function agent for improving battery performance of LiMn2O4 cathode. Solid State Ion. 167, 237–242 (2004). https://doi.org/10.1016/j.ssi.2004.01.016
Welch, C., Mohammad, A.K., Hosmane, N.S., et al.: Effect of aluminum oxide on the performance of ionic liquid-based aluminum–air battery. Energies 13, 2014 (2020). https://doi.org/10.3390/EN13082014
Luo, D., Fang, S.H., Tamiya, Y., et al.: Countering the segregation of transition-metal ions in LiMn1/3Co1/3Ni1/3O2 cathode for ultralong life and high-energy Li-ion batteries. Small 12, 4421–4430 (2016). https://doi.org/10.1002/smll.201601923
Mohamed, N., Allam, N.K.: Recent advances in the design of cathode materials for Li-ion batteries. RSC Adv. 10, 21662–21685 (2020). https://doi.org/10.1039/d0ra03314f
Piao, J.Y., Gu, L., Wei, Z.X., et al.: Phase control on surface for the stabilization of high energy cathode materials of lithium ion batteries. J. Am. Chem. Soc. 141, 4900–4907 (2019). https://doi.org/10.1021/jacs.8b13438
Manthiram, A.: A reflection on lithium-ion battery cathode chemistry. Nat. Commun. 11, 1550 (2020). https://doi.org/10.1038/s41467-020-15355-0
Mizushima, K., Jones, P.C., Wiseman, P.J., et al.: LixCoO2 (0<x<−1): a new cathode material for batteries of high energy density. Mater. Res. Bull. 15, 783–789 (1980). https://doi.org/10.1016/0025-5408(80)90012-4
Lyu, Y.C., Wu, X., Wang, K., et al.: An overview on the advances of LiCoO2 cathodes for lithium-ion batteries. Adv. Energy Mater. 11, 2000982 (2021). https://doi.org/10.1002/aenm.202000982
Liu, S., Liu, Z.P., Shen, X., et al.: Surface doping to enhance structural integrity and performance of Li-rich layered oxide. Adv. Energy Mater. 8, 1802105 (2018). https://doi.org/10.1002/aenm.201802105
Kalluri, S., Yoon, M., Jo, M., et al.: Surface engineering strategies of layered LiCoO2 cathode material to realize high-energy and high-voltage Li-ion cells. Adv. Energy Mater. 7, 1601507 (2017). https://doi.org/10.1002/aenm.201601507
Jian, Z.L., Wang, W.T., Wang, M.Y., et al.: Al2O3 coated LiCoO2 as cathode for high-capacity and long-cycling Li-ion batteries. Chin. Chem. Lett. 29, 1768–1772 (2018). https://doi.org/10.1016/j.cclet.2018.11.002
Moon, S.H., Kim, M.C., Kim, E.S., et al.: TiO2-coated LiCoO2 electrodes fabricated by a sputtering deposition method for lithium-ion batteries with enhanced electrochemical performance. RSC Adv. 9, 7903–7907 (2019). https://doi.org/10.1039/c8ra10451d
Wang, D., Astruc, D.: The recent development of efficient Earth-abundant transition-metal nanocatalysts. Chem. Soc. Rev. 46, 816–854 (2017). https://doi.org/10.1039/c6cs00629a
Julien, C., Mauger, A., Zaghib, K., et al.: Comparative issues of cathode materials for Li-ion batteries. Inorganics 2, 132–154 (2014). https://doi.org/10.3390/inorganics2010132
Jo, M.R., Kim, Y., Yang, J., et al.: Triggered reversible phase transformation between layered and spinel structure in Manganese-based layered compounds. Nat. Commun. 10, 3385 (2019). https://doi.org/10.1038/s41467-019-11195-9
Sun, H., Zhao, K.J.: Electronic structure and comparative properties of LiNixMnyCozO2 cathode materials. J. Phys. Chem. C 121, 6002–6010 (2017). https://doi.org/10.1021/acs.jpcc.7b00810
Noerochim, L., Suwarno, S., Idris, N.H., et al.: Recent development of nickel-rich and cobalt-free cathode materials for lithium-ion batteries. Batteries 7, 84 (2021). https://doi.org/10.3390/batteries7040084
Xu, R., Sun, H., de Vasconcelos, L.S., et al.: Mechanical and structural degradation of LiNixMnyCozO2Cathode in Li-ion batteries: an experimental study. J. Electrochem. Soc. 164, A3333–A3341 (2017). https://doi.org/10.1149/2.1751713jes
Li, T.Y., Yuan, X.Z., Zhang, L., et al.: Degradation mechanisms and mitigation strategies of nickel-rich NMC-based lithium-ion batteries. Electrochem. Energy Rev. 3, 43–80 (2020)
Xie, Y., Saubanère, M., Doublet, M.L.: Requirements for reversible extra-capacity in Li-rich layered oxides for Li-ion batteries. Energy Environ. Sci. 10, 266–274 (2017). https://doi.org/10.1039/C6EE02328B
Chen, Q., Pei, Y., Chen, H.W., et al.: Highly reversible oxygen redox in layered compounds enabled by surface polyanions. Nat. Commun. 11, 3411 (2020). https://doi.org/10.1038/s41467-020-17126-3
Li, X.F., Xu, Y.L., Wang, C.L.: Suppression of Jahn-Teller distortion of spinel LiMn2O4 cathode. J. Alloys Compd. 479, 310–313 (2009). https://doi.org/10.1016/j.jallcom.2008.12.081
Xia, H., Luo, Z.T., Xie, J.P.: Nanostructured LiMn2O4 and their composites as high-performance cathodes for lithium-ion batteries. Prog. Nat. Sci. Mater. Int. 22, 572–584 (2012). https://doi.org/10.1016/j.pnsc.2012.11.014
Massé, R.C., Liu, C.F., Li, Y.W., et al.: Energy storage through intercalation reactions: electrodes for rechargeable batteries. Natl Sci Rev 4, 26–53 (2017). https://doi.org/10.1093/nsr/nww093
Rajapakse, M., Karki, B., Abu, U.O., et al.: Intercalation as a versatile tool for fabrication, property tuning, and phase transitions in 2D materials. NPJ 2D Mater. Appl. 5, 1–21 (2021). https://doi.org/10.1038/s41699-021-00211-6
Allen, J.L., Xu, K., Zhang, S.S., et al.: LiMBO3 (M=Fe, Mn): potential cathode for lithium ion batteries. MRS Online Proc. Libr. 730, 18 (2002)
Kalantarian, M.M., Hafizi-Barjini, M., Momeni, M.: Ab initio study of AMBO3 (A = Li, Na and M = Mn, Fe Co, Ni) as cathode materials for Li-ion and Na-ion batteries. ACS Omega 5, 8952–8961 (2020). https://doi.org/10.1021/acsomega.0c00718
Bini, M., Ferrari, S., Ferrara, C., et al.: Polymorphism and magnetic properties of Li2MSiO4 (M = Fe, Mn) cathode materials. Sci. Rep. 3, 3452 (2013). https://doi.org/10.1038/srep03452
Yang, F., Xia, Z.C., Huang, S., et al.: High field phase transition of cathode material Li2MnSiO4 for lithium-ion battery. Mater. Res. Express 7, 026104 (2020). https://doi.org/10.1088/2053-1591/ab5c39
Thackeray, M.M., Amine, K.: LiMn2O4 spinel and substituted cathodes. Nat. Energy 6, 566 (2021). https://doi.org/10.1038/s41560-021-00815-8
Haik, O., Leifer, N., Samuk-Fromovich, Z., et al.: On the surface chemistry of LiMO2 cathode materials (M=[MnNi]and[MnNiCo]): electrochemical, spectroscopic, and calorimetric studies. J. Electrochem. Soc. 157, A1099 (2010). https://doi.org/10.1149/1.3474222
Liu, L., Zhou, M., Wang, X.Y., et al.: Synthesis and electrochemical performance of spherical FeF3/ACMB composite as cathode material for lithium-ion batteries. J. Mater. Sci. 47, 1819–1824 (2012)
Karapidakis, E., Vernardou, D.: Progress on V2O5 cathodes for multivalent aqueous batteries. Materials (Basel) 14, 2310 (2021). https://doi.org/10.3390/ma14092310
Liu, J., Liu, W., Wan, Y.L., et al.: Facile synthesis of layered LiV3O8 hollow nanospheres as superior cathode materials for high-rate Li-ion batteries. RSC Adv. 2, 10470–10474 (2012). https://doi.org/10.1039/C2RA20969A
Zhang, Y.N., Liu, Y.P., Liu, Z.H., et al.: MnO2 cathode materials with the improved stability via nitrogen doping for aqueous zinc-ion batteries. J. Energy Chem. 64, 23–32 (2022). https://doi.org/10.1016/j.jechem.2021.04.046
Chen, R.J., Zhao, T.L., Zhang, X.X., et al.: Advanced cathode materials for lithium-ion batteries using nanoarchitectonics. Nanoscale Horiz. 1, 423–444 (2016). https://doi.org/10.1039/c6nh00016a
Huang, K.J., Ceder, G., Olivetti, E.A.: Manufacturing scalability implications of materials choice in inorganic solid-state batteries. Joule 5, 564–580 (2021). https://doi.org/10.1016/j.joule.2020.12.001
Wang, L., Wu, H.H., Hu, Y.C., et al.: Environmental sustainability assessment of typical cathode materials of lithium-ion battery based on three LCA approaches. Processes 7, 83 (2019). https://doi.org/10.3390/pr7020083
Eshetu, G.G., Zhang, H., Judez, X., et al.: Production of high-energy Li-ion batteries comprising silicon-containing anodes and insertion-type cathodes. Nat. Commun. 12, 5459 (2021). https://doi.org/10.1038/s41467-021-25334-8
Guo, S.H., Li, Q., Liu, P., et al.: Environmentally stable interface of layered oxide cathodes for sodium-ion batteries. Nat. Commun. 8, 135 (2017). https://doi.org/10.1038/s41467-017-00157-8
Chen, M.Z., Liu, Q.N., Wang, S.W., et al.: High-abundance and low-cost metal-based cathode materials for sodium-ion batteries: problems, progress, and key technologies. Adv. Energy Mater. 9, 1803609 (2019). https://doi.org/10.1002/aenm.201803609
Jiang, S.S., Wang, Y.S.: Synthesis and characterization of vanadium-doped LiFePO4@C electrode with excellent rate capability for lithium-ion batteries. Solid State Ion. 335, 97–102 (2019). https://doi.org/10.1016/j.ssi.2019.03.002
Breuer, O., Chakraborty, A., Liu, J., et al.: Understanding the role of minor molybdenum doping in LiNi0.5Co0.2Mn0.3O2 electrodes: from structural and surface analyses and theoretical modeling to practical electrochemical cells. ACS Appl. Mater. Interfaces 10, 29608–29621 (2018). https://doi.org/10.1021/acsami.8b09795
Edström, K., Gustafsson, T., Thomas, J.O.: The cathode–electrolyte interface in the Li-ion battery. Electrochim. Acta 50, 397–403 (2004). https://doi.org/10.1016/j.electacta.2004.03.049
Jo, C.H., Cho, D.H., Noh, H.J., et al.: An effective method to reduce residual lithium compounds on Ni-rich Li[Ni0.6Co0.2Mn0.2]O2 active material using a phosphoric acid derived Li3PO4 nanolayer. Nano Res.8, 1464–1479 (2015). https://doi.org/10.1007/s12274-014-0631-8
Qian, J.W., Liu, L., Yang, J.X., et al.: Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries. Nat. Commun. 9, 4918 (2018). https://doi.org/10.1038/s41467-018-07296-6
Kubicka, M., Bakierska, M., Świętosławski, M., et al.: The temperature effect on the electrochemical performance of sulfur-doped LiMn2O4 in Li-ion cells. Nanomaterials (Basel) 9, 1722 (2019). https://doi.org/10.3390/nano9121722
Jin, C., Zhang, X.D., He, W., et al.: Effect of ion doping on the electrochemical performances of LiFePO4–Li3V2(PO4)3 composite cathode materials. RSC Adv. 4, 15332–15339 (2014). https://doi.org/10.1039/c3ra47734g
Wolfenstine, J., Allen, J.: Ni3+/Ni2+ redox potential in LiNiPO4. J. Power Sources 142, 389–390 (2005). https://doi.org/10.1016/j.jpowsour.2004.11.024
Liu, G.Q., Wen, L., Liu, Y.M.: Spinel LiNi0.5Mn1.5O4 and its derivatives as cathodes for high-voltage Li-ion batteries. J. Solid State Electrochem. 14, 2191–2202 (2010)
Zhu, M.J., Li, J.G., Liu, Z.B., et al.: Preparation and electrochemical properties of LiNi2/3Co1/6Mn1/6O2 cathode material for lithium-ion batteries. Materials (Basel) 14, 1766 (2021). https://doi.org/10.3390/ma14071766
Song, C.H., Wang, W.G., Peng, H.L., et al.: Improving the electrochemical performance of LiNi0.80Co0.15Al0.05O2 in lithium ion batteries by LiAlO2 surface modification. Appl. Sci. 8, 378 (2018). https://doi.org/10.3390/app8030378
Aliahmad, N., Biswas, P.K., Dalir, H., et al.: Synthesis of V2O5/single-walled carbon nanotubes integrated into nanostructured composites as cathode materials in high performance lithium-ion batteries. Energies 15, 552 (2022). https://doi.org/10.3390/en15020552
Pei, F., Lin, L.L., Ou, D.H., et al.: Self-supporting sulfur cathodes enabled by two-dimensional carbon yolk-shell nanosheets for high-energy-density lithium-sulfur batteries. Nat. Commun. 8, 482 (2017). https://doi.org/10.1038/s41467-017-00575-8
Hautier, G., Jain, A., Ong, S.P., et al.: Phosphates as lithium-ion battery cathodes: an evaluation based on high-throughput ab initio calculations. Chem. Mater. 23, 3495–3508 (2011). https://doi.org/10.1021/cm200949v
Donders, M.E., Arnoldbik, W.M., Knoops, H.C.M., et al.: Atomic layer deposition of LiCoO2Thin-film electrodes for all-solid-state Li-ion micro-batteries. J. Electrochem. Soc. 160, A3066–A3071 (2013). https://doi.org/10.1149/2.011305jes
Srur-Lavi, O., Miikkulainen, V., Markovsky, B., et al.: Studies of the electrochemical behavior of LiNi0.80Co0.15Al0.05O2 electrodes coated with LiAlO2. J. Electrochem. Soc. 164, A3266–A3275 (2017). https://doi.org/10.1149/2.1631713jes
Liu, J., Banis, M.N., Sun, Q., et al.: Rational design of atomic-layer-deposited LiFePO4 as a high-performance cathode for lithium-ion batteries. Adv. Mater. 26, 1401805 (2014). https://doi.org/10.1002/adma.201401805
Mukhopadhyay, A., Sheldon, B.W.: Deformation and stress in electrode materials for Li-ion batteries. Prog. Mater. Sci. 63, 58–116 (2014). https://doi.org/10.1016/j.pmatsci.2014.02.001
Laskar, M.R., Jackson, D.H.K., Xu, S.Z., et al.: Atomic layer deposited MgO: a lower overpotential coating for Li[Ni0.5Mn0.3Co0.2]O2 cathode. ACS Appl. Mater. Interfaces 9, 11231–11239 (2017). https://doi.org/10.1021/acsami.6b16562
Mackus, A.J.M., Schneider, J.R., MacIsaac, C., et al.: Synthesis of doped, ternary, and quaternary materials by atomic layer deposition: a review. Chem. Mater. 31, 1142–1183 (2019). https://doi.org/10.1021/acs.chemmater.8b02878
Miikkulainen, V., Ruud, A., Østreng, E., et al.: Atomic layer deposition of spinel lithium manganese oxide by film-body-controlled lithium incorporation for thin-film lithium-ion batteries. J. Phys. Chem. C 118, 1258–1268 (2014). https://doi.org/10.1021/jp409399y
Ming, H., Yan, Y.R., Ming, J., et al.: Gradient V2O5 surface-coated LiMn2O4 cathode towards enhanced performance in Li-ion battery applications. Electrochim. Acta 120, 390–397 (2014). https://doi.org/10.1016/j.electacta.2013.12.096
Aribia, A., Sastre, J., Chen, X.B., et al.: In situ lithiated ALD niobium oxide for improved long term cycling of layered oxide cathodes: a thin-film model study. J. Electrochem. Soc. 168, 040513 (2021). https://doi.org/10.1149/1945-7111/abf215
Li, G., Yang, Z.X., Yang, W.S.: Effect of FePO4 coating on electrochemical and safety performance of LiCoO2 as cathode material for Li-ion batteries. J. Power Sources 183, 741–748 (2008). https://doi.org/10.1016/j.jpowsour.2008.05.047
Liu, J., Xiao, B.W., Banis, M.N., et al.: Atomic layer deposition of amorphous iron phosphates on carbon nanotubes as cathode materials for lithium-ion batteries. Electrochim. Acta 162, 275–281 (2015). https://doi.org/10.1016/j.electacta.2014.12.158
Xie, M., Sun, X., Sun, H.T., et al.: Stabilizing an amorphous V2O5/carbon nanotube paper electrode with conformal TiO2 coating by atomic layer deposition for lithium ion batteries. J. Mater. Chem. A 4, 537–544 (2016). https://doi.org/10.1039/C5TA01949D
Østreng, E., Gandrud, K.B., Hu, Y., et al.: High power nano-structured V2O5 thin film cathodes by atomic layer deposition. J. Mater. Chem. A 2, 15044–15051 (2014). https://doi.org/10.1039/C4TA00694A
Maximov, M., Nazarov, D., Rumyantsev, A., et al.: Atomic layer deposition of lithium–nickel–silicon oxide cathode material for thin-film lithium-ion batteries. Energies 13, 2345 (2020). https://doi.org/10.3390/en13092345
Chen, X.Y., Pomerantseva, E., Banerjee, P., et al.: Ozone-based atomic layer deposition of crystalline V2O5 films for high performance electrochemical energy storage. Chem. Mater. 24, 1255–1261 (2012). https://doi.org/10.1021/cm202901z
Chen, X.Y., Zhu, H.L., Chen, Y.C., et al.: MWCNT/V2O5 core/shell sponge for high areal capacity and power density Li-ion cathodes. ACS Nano 6, 7948–7955 (2012). https://doi.org/10.1021/nn302417x
Sattar, T., Lee, S.H., Jin, B.S., et al.: Influence of Mo addition on the structural and electrochemical performance of Ni-rich cathode material for lithium-ion batteries. Sci. Rep. 10, 8562 (2020). https://doi.org/10.1038/s41598-020-64546-8
Cheng, H.M., Wang, F.M., Chu, J.P., et al.: Enhanced cycleabity in lithium ion batteries: resulting from atomic layer depostion of Al2O3 or TiO2 on LiCoO2 electrodes. J. Phys. Chem. C 116, 7629–7637 (2012). https://doi.org/10.1021/jp210551r
Fan, Q.L., Lin, K.J., Yang, S.D., et al.: Constructing effective TiO2 nano-coating for high-voltage Ni-rich cathode materials for lithium ion batteries by precise kinetic control. J. Power Sources 477, 228745 (2020). https://doi.org/10.1016/j.jpowsour.2020.228745
Kim, J.W., Kim, D.H., Oh, D.Y., et al.: Surface chemistry of LiNi0.5Mn1.5O4 particles coated by Al2O3 using atomic layer deposition for lithium-ion batteries. J. Power Sources 274, 1254–1262 (2015). https://doi.org/10.1016/j.jpowsour.2014.10.207
Wang, C.C., Lin, J.W., Yu, Y.H., et al.: Nanolaminated ZnO–TiO2 coated lithium-rich layered oxide cathodes by atomic layer deposition for enhanced electrochemical performances. J. Alloys Compd. 842, 155845 (2020). https://doi.org/10.1016/j.jallcom.2020.155845
Zhao, J.Q., Wang, Y.: Atomic layer deposition of epitaxial ZrO2 coating on LiMn2O4 nanoparticles for high-rate lithium ion batteries at elevated temperature. Nano Energy 2, 882–889 (2013). https://doi.org/10.1016/j.nanoen.2013.03.005
Zhou, Y., Lee, Y., Sun, H.X., et al.: Coating solution for high-voltage cathode: AlF3 atomic layer deposition for freestanding LiCoO2 electrodes with high energy density and excellent flexibility. ACS Appl. Mater. Interfaces 9, 9614–9619 (2017). https://doi.org/10.1021/acsami.6b15628
Hämäläinen, J., Holopainen, J., Munnik, F., et al.: Lithium phosphate thin films grown by atomic layer deposition. J. Electrochem. Soc. 159, A259–A263 (2012). https://doi.org/10.1149/2.052203jes
Li, W., Yang, L.S., Li, Y.J., et al.: Ultra-thin AlPO4 layer coated LiNi0.7Co0.15Mn0.15O2 cathodes with enhanced high-voltage and high-temperature performance for lithium-ion half/full batteries. Front. Chem. 8, 597 (2020). https://doi.org/10.3389/fchem.2020.00597
Cho, J., Kim, T.G., Kim, C., et al.: Comparison of Al2O3- and AlPO4-coated LiCoO2 cathode materials for a Li-ion cell. J. Power Sources 146, 58–64 (2005). https://doi.org/10.1016/j.jpowsour.2005.03.118
Liu, Y., Liu, W.B., Zhu, M.Y., et al.: Coating ultra-thin TiN layer onto LiNi0.8Co0.1Mn0.1O2 cathode material by atomic layer deposition for high-performance lithium-ion batteries. J. Alloys Compd. 888, 161594 (2021). https://doi.org/10.1016/j.jallcom.2021.161594
Hu, Y.Y., Lu, J., Feng, H.: Surface modification and functionalization of powder materials by atomic layer deposition: a review. RSC Adv. 11, 11918–11942 (2021). https://doi.org/10.1039/d1ra00326g
Nandi, D.K., Sen, U.K., Choudhury, D., et al.: Atomic layer deposited MoS2 as a carbon and binder free anode in Li-ion battery. Electrochim. Acta 146, 706–713 (2014). https://doi.org/10.1016/j.electacta.2014.09.077
Henderick, L., Hamed, H., Mattelaer, F., et al.: Plasma enhanced atomic layer deposition of a (nitrogen doped) Ti phosphate coating for improved energy storage in Li-ion batteries. J. Power Sources 497, 229866 (2021). https://doi.org/10.1016/j.jpowsour.2021.229866
Ahn, J., Jang, E.K., Yoon, S., et al.: Ultrathin ZrO2 on LiNi0.5Mn0.3Co0.2O2 electrode surface via atomic layer deposition for high-voltage operation in lithium-ion batteries. Appl. Surf. Sci. 484, 701–709 (2019). https://doi.org/10.1016/j.apsusc.2019.04.123
Kang, Y.Q., Guo, X.G., Guo, Z.W., et al.: Phosphorus-doped lithium- and manganese-rich layered oxide cathode material for fast charging lithium-ion batteries. J. Energy Chem. 62, 538–545 (2021). https://doi.org/10.1016/j.jechem.2021.04.026
Xiao, B.W., Wang, B.Q., Liu, J., et al.: Highly stable Li1.2Mn0.54Co0.13Ni0.13O2 enabled by novel atomic layer deposited AlPO4 coating. Nano Energy 34, 120–130 (2017). https://doi.org/10.1016/j.nanoen.2017.02.015
Xiao, B.W., Liu, J., Sun, Q., et al.: Unravelling the role of electrochemically active FePO4 coating by atomic layer deposition for increased high-voltage stability of LiNi0.5Mn1.5O4 cathode material. Adv. Sci. (Weinh) 2, 1500022 (2015). https://doi.org/10.1002/advs.201500022
Jung, Y.S., Cavanagh, A.S., Dillon, A.C., et al.: Enhanced stability of LiCoO2 cathodes in lithium-ion batteries using surface modification by atomic layer deposition. J. Electrochem. Soc. 157, A75 (2010). https://doi.org/10.1149/1.3258274
Park, J.S., Mane, A.U., Elam, J.W., et al.: Amorphous metal fluoride passivation coatings prepared by atomic layer deposition on LiCoO2 for Li-ion batteries. Chem. Mater. 27, 1917–1920 (2015). https://doi.org/10.1021/acs.chemmater.5b00603
Xie, J., Sendek, A.D., Cubuk, E.D., et al.: Atomic layer deposition of stable LiAlF4 lithium ion conductive interfacial layer for stable cathode cycling. ACS Nano 11, 7019–7027 (2017). https://doi.org/10.1021/acsnano.7b02561
Zhang, X.F., Belharouak, I., Li, L., et al.: Structural and electrochemical study of Al2O3 and TiO2 coated Li1.2Ni0.13Mn0.54Co0.13O2 cathode material using ALD. Adv. Energy Mater. 3, 1299–1307 (2013). https://doi.org/10.1002/aenm.201300269
Kim, J.W., Travis, J.J., Hu, E.Y., et al.: Unexpected high power performance of atomic layer deposition coated Li[Ni1/3Mn1/3Co1/3]O2 cathodes. J. Power Sources 254, 190–197 (2014). https://doi.org/10.1016/j.jpowsour.2013.12.119
Deng, S.X., Xiao, B.W., Wang, B.Q., et al.: New insight into atomic-scale engineering of electrode surface for long-life and safe high voltage lithium ion cathodes. Nano Energy 38, 19–27 (2017). https://doi.org/10.1016/j.nanoen.2017.05.007
Cho, H.M., Chen, M.V., MacRae, A.C., et al.: Effect of surface modification on nano-structured LiNi0.5Mn1.5O4 spinel materials. ACS Appl. Mater. Interfaces 7, 16231–16239 (2015). https://doi.org/10.1021/acsami.5b01392
Wise, A.M., Ban, C.M., Weker, J.N., et al.: Effect of Al2O3 coating on stabilizing LiNi0.4Mn0.4Co0.2O2 cathodes. Chem. Mater. 27, 6146–6154 (2015). https://doi.org/10.1021/acs.chemmater.5b02952
Xu, W., Wang, J.L., Ding, F., et al.: Lithium metal anodes for rechargeable batteries. Energy Environ. Sci. 7, 513–537 (2014). https://doi.org/10.1039/C3EE40795K
Lin, D.C., Liu, Y.Y., Cui, Y.: Reviving the lithium metal anode for high-energy batteries. Nat. Nanotechnol. 12, 194–206 (2017). https://doi.org/10.1038/nnano.2017.16
Cao, D.X., Sun, X., Li, Q., et al.: Lithium dendrite in all-solid-state batteries: growth mechanisms, suppression strategies, and characterizations. Matter 3, 57–94 (2020). https://doi.org/10.1016/j.matt.2020.03.015
Ikonen, T., Kalidas, N., Lahtinen, K., et al.: Conjugation with carbon nanotubes improves the performance of mesoporous silicon as Li-ion battery anode. Sci. Rep. 10, 5589 (2020). https://doi.org/10.1038/s41598-020-62564-0
Zhang, J.X., Xie, Z.W., Li, W., et al.: High-capacity graphene oxide/graphite/carbon nanotube composites for use in Li-ion battery anodes. Carbon 74, 153–162 (2014). https://doi.org/10.1016/j.carbon.2014.03.017
Ozanam, F., Rosso, M.: Silicon as anode material for Li-ion batteries. Mater. Sci. Eng. B 213, 2–11 (2016). https://doi.org/10.1016/j.mseb.2016.04.016
Wu, C.B., Wang, Y.W., Ma, G.Q., et al.: Enhanced rate capability of Li4Ti5O12 anode material by a photo-assisted sol–gel route for lithium-ion batteries. Electrochem. Commun. 131, 107119 (2021). https://doi.org/10.1016/j.elecom.2021.107119
Shi, X.Y., Yu, S.S., Deng, T., et al.: Unlock the potential of Li4Ti5O12 for high-voltage/long-cycling-life and high-safety batteries: dual-ion architecture superior to lithium-ion storage. J. Energy Chem. 44, 13–18 (2020). https://doi.org/10.1016/j.jechem.2019.09.015
Maranchi, J.P., Hepp, A.F., Evans, A.G., et al.: Interfacial properties of the a-Si/Cu: active-inactive thin-film anode system for lithium-ion batteries. J. Electrochem. Soc. 153, A1246 (2006). https://doi.org/10.1149/1.2184753
Ryu, J., Hong, D., Lee, H.W., et al.: Practical considerations of Si-based anodes for lithium-ion battery applications. Nano Res. 10, 3970–4002 (2017)
Sivashanmugam, A., Gopukumar, S., Thirunakaran, R., et al.: Novel Li4Ti5O12/Sn nano-composites as anode material for lithium ion batteries. Mater. Res. Bull. 46, 492–500 (2011). https://doi.org/10.1016/j.materresbull.2011.01.007
Nitta, N., Yushin, G.: High-capacity anode materials for lithium-ion batteries: choice of elements and structures for active particles. Part. Part. Syst. Charact. 31, 317–336 (2014). https://doi.org/10.1002/ppsc.201300231
Liang, B., Liu, Y.P., Xu, Y.H.: Silicon-based materials as high capacity anodes for next generation lithium ion batteries. J. Power Sources 267, 469–490 (2014). https://doi.org/10.1016/j.jpowsour.2014.05.096
Wang, H.S., Liu, Y.Y., Li, Y.Z., et al.: Lithium metal anode materials design: interphase and host. Electrochem. Energy Rev. 2, 509–517 (2019)
Liu, B., Zhang, J.G., Xu, W.: Advancing lithium metal batteries. Joule 2, 833–845 (2018). https://doi.org/10.1016/j.joule.2018.03.008
Cheng, Q., Okamoto, Y., Tamura, N., et al.: Graphene-like-graphite as fast-chargeable and high-capacity anode materials for lithium ion batteries. Sci. Rep. 7, 14782 (2017). https://doi.org/10.1038/s41598-017-14504-8
Cheng, H., Shapter, J.G., Li, Y.Y., et al.: Recent progress of advanced anode materials of lithium-ion batteries. J. Energy Chem. 57, 451–468 (2021). https://doi.org/10.1016/j.jechem.2020.08.056
Asenbauer, J., Eisenmann, T., Kuenzel, M., et al.: The success story of graphite as a lithium-ion anode material: fundamentals, remaining challenges, and recent developments including silicon (oxide) composites. Sustain. Energy Fuels 4, 5387–5416 (2020). https://doi.org/10.1039/D0SE00175A
Luo, P., Zheng, C., He, J.W., et al.: Structural engineering in graphite-based metal-ion batteries. Adv. Funct. Mater. 32, 2107277 (2022). https://doi.org/10.1002/adfm.202107277
Shah, R., Mittal, V., Matsil, E., et al.: Magnesium-ion batteries for electric vehicles: current trends and future perspectives. Adv. Mech. Eng. 13, 168781402110033 (2021). https://doi.org/10.1177/16878140211003398
Wang, G.J., Gao, J., Fu, L.J., et al.: Preparation and characteristic of carbon-coated Li4Ti5O12 anode material. J. Power Sources 174, 1109–1112 (2007). https://doi.org/10.1016/j.jpowsour.2007.06.107
Lai, S.Y., Cavallo, C., Abdelhamid, M.E., et al.: Advanced and emerging negative electrodes for Li-ion capacitors: pragmatism vs. performance. Energies 14, 3010 (2021). https://doi.org/10.3390/en14113010
Wei, W., Wang, Z.H., Liu, Z., et al.: Metal oxide hollow nanostructures: fabrication and Li storage performance. J. Power Sources 238, 376–387 (2013). https://doi.org/10.1016/j.jpowsour.2013.03.173
Madian, M., Eychmüller, A., Giebeler, L.: Current advances in TiO2-based nanostructure electrodes for high performance lithium ion batteries. Batteries 4, 7 (2018). https://doi.org/10.3390/batteries4010007
Bui, V.K.H., Pham, T.N., Hur, J., et al.: Review of ZnO binary and ternary composite anodes for lithium-ion batteries. Nanomater. Basel Switz. 11, 2001 (2021). https://doi.org/10.3390/nano11082001
Casimir, A., Zhang, H.G., Ogoke, O., et al.: Silicon-based anodes for lithium-ion batteries: effectiveness of materials synthesis and electrode preparation. Nano Energy 27, 359–376 (2016). https://doi.org/10.1016/j.nanoen.2016.07.023
Andersen, H.F., Foss, C.E.L., Voje, J., et al.: Silicon-Carbon composite anodes from industrial battery grade silicon. Sci. Rep. 9, 14814 (2019). https://doi.org/10.1038/s41598-019-51324-4
Kim, H., Kweon, K.E., Chou, C.Y., et al.: On the nature and behavior of Li atoms in Si: a first principles study. J. Phys. Chem. C 114, 17942–17946 (2010). https://doi.org/10.1021/jp104289x
Dai, L., Zhong, X., Zou, J., et al.: Highly ordered SnO2 nanopillar array as binder-free anodes for long-life and high-rate Li-ion batteries. Nanomater. Basel Switz. 11, 1307 (2021). https://doi.org/10.3390/nano11051307
Ma, Y.N., Li, W.J., Ji, S.D., et al.: Fabrication of bristlegrass-like VO2(B)-ZnO heteroarchitectures as anode materials for lithium-ion batteries. Mater. Res. Express 4, 085033 (2017). https://doi.org/10.1088/2053-1591/aa84c3
An, S.J., Li, J.L., Daniel, C., et al.: The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling. Carbon 105, 52–76 (2016). https://doi.org/10.1016/j.carbon.2016.04.008
Xu, B.L., Oudalov, A., Ulbig, A., et al.: Modeling of lithium-ion battery degradation for cell life assessment. IEEE Trans. Smart Grid 9, 1131–1140 (2018). https://doi.org/10.1109/TSG.2016.2578950
Qi, W., Shapter, J.G., Wu, Q., et al.: Nanostructured anode materials for lithium-ion batteries: principle, recent progress and future perspectives. J. Mater. Chem. A 5, 19521–19540 (2017). https://doi.org/10.1039/C7TA05283A
Kim, H., Lee, E.J., Sun, Y.K.: Recent advances in the Si-based nanocomposite materials as high capacity anode materials for lithium ion batteries. Mater. Today 17, 285–297 (2014). https://doi.org/10.1016/j.mattod.2014.05.003
Fu, L.J., Liu, H., Li, C., et al.: Surface modifications of electrode materials for lithium ion batteries. Solid State Sci. 8, 113–128 (2006). https://doi.org/10.1016/j.solidstatesciences.2005.10.019
Son, S.B., Kappes, B., Ban, C.M.: Surface modification of silicon anodes for durable and high energy lithium-ion batteries. Isr. J. Chem. 55, 558–569 (2015). https://doi.org/10.1002/ijch.201400173
Tornheim, A., He, M.N., Su, C.C., et al.: The role of additives in improving performance in high voltage lithium-ion batteries with potentiostatic holds. J. Electrochem. Soc. 164, A6366–A6372 (2017). https://doi.org/10.1149/2.0471701jes
Cao, Y.Q., Wang, S.S., Liu, C., et al.: Atomic layer deposition of ZnO/TiO2 nanolaminates as ultra-long life anode material for lithium-ion batteries. Sci. Rep. 9, 11526 (2019). https://doi.org/10.1038/s41598-019-48088-2
Yang, J.H., Sagar, R.U.R., Anwar, T., et al.: Graphene foam as a stable anode material in lithium-ion batteries. Int. J. Energy Res. 46, 5226–5234 (2022). https://doi.org/10.1002/er.7514
Qin, L.G., Xu, H., Wang, D., et al.: Fabrication of lithiophilic copper foam with interfacial modulation toward high-rate lithium metal anodes. ACS Appl. Mater. Interfaces 10, 27764–27770 (2018). https://doi.org/10.1021/acsami.8b07362
Song, Y., Hwang, J., Lee, S., et al.: Synthesis of a high-capacity NiO/Ni foam anode for advanced lithium-ion batteries. Adv. Eng. Mater. 22, 2000351 (2020). https://doi.org/10.1002/ADEM.202000351
Cho, J.S.: Large scale process for low crystalline MoO3-carbon composite microspheres prepared by one-step spray pyrolysis for anodes in lithium-ion batteries. Nanomater. 9, 539 (2019). https://doi.org/10.3390/NANO9040539
Sun, Y., Huang, F.Z., Li, S.K., et al.: Novel porous starfish-like Co3O4@nitrogen-doped carbon as an advanced anode for lithium-ion batteries. Nano Res. 10, 3457–3467 (2017). https://doi.org/10.1007/s12274-017-1557-8
Liu, Y., Yang, Y.F.: Recent progress of TiO2-based anodes for Li ion batteries. J. Nanomater. 2016, 2 (2016). https://doi.org/10.1155/2016/8123652
Xin, F.X., Whittingham, M.S.: Challenges and development of tin-based anode with high volumetric capacity for Li-ion batteries. Electrochem. Energy Rev. 3, 643–655 (2020). https://doi.org/10.1007/s41918-020-00082-3
Liu, A.M., Liang, X.Y., Ren, X.F., et al.: Recent progress in MXene-based materials for metal-sulfur and metal-air batteries: potential high-performance electrodes. Electrochem. Energy Rev. 5, 112–144 (2022). https://doi.org/10.1007/s41918-021-00110-w
Abbasi, N.M., Xiao, Y., Zhang, L., et al.: Heterostructures of titanium-based MXenes in energy conversion and storage devices. J. Mater. Chem. C 9, 8395–8465 (2021). https://doi.org/10.1039/D1TC00327E
Forouzandeh, P., Pillai, S.C.: MXenes-based nanocomposites for supercapacitor applications. Curr. Opin. Chem. Eng. 33, 100710 (2021). https://doi.org/10.1016/j.coche.2021.100710
Zhao, B., Mattelaer, F., Kint, J., et al.: Atomic layer deposition of ZnO–SnO2 composite thin film: the influence of structure, composition and crystallinity on lithium-ion battery performance. Electrochim. Acta 320, 134604 (2019). https://doi.org/10.1016/j.electacta.2019.134604
Mitrofanov, I., Nazarov, D., Koshtyal, Y., et al.: Nickel-cobalt oxide thin-films anodes for lithium-ion batteries. In: NANOCON 2020 Conference Proeedings, TANGER Ltd., October 2021
Han, L., Hsieh, C.T., Chandra Mallick, B., et al.: Recent progress and future prospects of atomic layer deposition to prepare/modify solid-state electrolytes and interfaces between electrodes for next-generation lithium batteries. Nanoscale Adv. 3, 2728–2740 (2021). https://doi.org/10.1039/d0na01072c
Zhu, S.Y., Liu, J.Q., Sun, J.M.: Growth of ultrathin SnO2 on carbon nanotubes by atomic layer deposition and their application in lithium ion battery anodes. Appl. Surf. Sci. 484, 600–609 (2019). https://doi.org/10.1016/j.apsusc.2019.04.163
Zhu, S.Y., Xu, P.H., Liu, J.Q., et al.: Atomic layer deposition and structure optimization of ultrathin Nb2O5 films on carbon nanotubes for high-rate and long-life lithium ion storage. Electrochim. Acta 331, 135268 (2020). https://doi.org/10.1016/j.electacta.2019.135268
Zhao, H.L., Gao, H.X., Li, B.Q., et al.: Atomic layer deposition of V2O5 on nitrogen-doped graphene as an anode for lithium-ion batteries. Mater. Lett. 252, 215–218 (2019). https://doi.org/10.1016/j.matlet.2019.05.059
Zhu, S.Y., Liu, J.Q., Sun, J.M.: Precise growth of Al2O3/SnO2/CNTs composites by a two-step atomic layer deposition and their application as an improved anode for lithium ion batteries. Electrochim. Acta 319, 490–498 (2019). https://doi.org/10.1016/j.electacta.2019.07.027
Wang, H.W., Jia, G.C., Guo, Y.Y., et al.: Atomic layer deposition of amorphous TiO2 on carbon nanotube networks and their superior Li and Na ion storage properties. Adv. Mater. Interfaces 3, 1600375 (2016). https://doi.org/10.1002/admi.201600375
Li, Y.L., Zhao, Y.T., Huang, G.S., et al.: ZnO nanomembrane/expanded graphite composite synthesized by atomic layer deposition as binder-free anode for lithium ion batteries. ACS Appl. Mater. Interfaces 9, 38522–38529 (2017). https://doi.org/10.1021/acsami.7b11735
Gregorczyk, K.E., Kozen, A.C., Chen, X.Y., et al.: Fabrication of 3D core-shell multiwalled carbon nanotube@RuO2 lithium-ion battery electrodes through a RuO2 atomic layer deposition process. ACS Nano 9, 464–473 (2015). https://doi.org/10.1021/nn505644q
Dhara, A., Sarkar, S.K., Mitra, S.: Controlled 3D carbon nanotube architecture coated with MoOx material by ALD technique: a high energy density lithium-ion battery electrode. Adv. Mater. Interfaces 4, 1700332 (2017). https://doi.org/10.1002/admi.201700332
Meng, X.B., Liu, J., Li, X.F., et al.: Atomic layer deposited Li4Ti5O12 on nitrogen-doped carbon nanotubes. RSC Adv. 3, 7285–7288 (2013). https://doi.org/10.1039/C3RA00033H
Miikkulainen, V., Nilsen, O., Laitinen, M., et al.: Atomic layer deposition of LixTiyOz thin films. RSC Adv. 3, 7537–7542 (2013). https://doi.org/10.1039/C3RA40745D
Ahmed, B., Anjum, D.H., Gogotsi, Y., et al.: Atomic layer deposition of SnO2 on MXene for Li-ion battery anodes. Nano Energy 34, 249–256 (2017). https://doi.org/10.1016/j.nanoen.2017.02.043
Nisula, M., Karppinen, M.: Atomic/molecular layer deposition of lithium terephthalate thin films as high rate capability Li-ion battery anodes. Nano Lett. 16, 1276–1281 (2016). https://doi.org/10.1021/acs.nanolett.5b04604
Haag, J.M., Pattanaik, G., Durstock, M.F.: Nanostructured 3D electrode architectures for high-rate Li-ion batteries. Adv. Mater. 25, 1205079 (2013). https://doi.org/10.1002/adma.201205079
Ye, J.C., Baumgaertel, A.C., Wang, Y.M., et al.: Structural optimization of 3D porous electrodes for high-rate performance lithium ion batteries. ACS Nano 9, 2194–2202 (2015). https://doi.org/10.1021/nn505490u
Xu, Y., Wood, K., Coyle, J., et al.: Chemistry of electrolyte reduction on lithium silicide. J. Phys. Chem. C 123, 13219–13224 (2019). https://doi.org/10.1021/acs.jpcc.9b02611
Su, Y.F., Chen, G., Chen, L., et al.: Advances and prospects of surface modification on nickel-rich materials for lithium-ion batteries. Chin. J. Chem. 38, 1817–1831 (2020). https://doi.org/10.1002/cjoc.202000385
Yang, C.C., Shih, J.Y., Wu, M.Y.: Preparation of silicon oxide coated KS-6 graphite composite anode materials by sol-gel method in lithium ion batteries. Energy Procedia 61, 1428–1433 (2014). https://doi.org/10.1016/j.egypro.2014.12.140
Zhao, B., Li, B.B., Wang, Z.X., et al.: Uniform Li deposition sites provided by atomic layer deposition for the dendrite-free lithium metal anode. ACS Appl. Mater. Interfaces 12, 19530–19538 (2020). https://doi.org/10.1021/acsami.0c02153
Wang, M.M., Cheng, X.P., Cao, T.C., et al.: Constructing ultrathin TiO2 protection layers via atomic layer deposition for stable lithium metal anode cycling. J. Alloys Compd. 865, 158748 (2021). https://doi.org/10.1016/j.jallcom.2021.158748
Alaboina, P.K., Rodrigues, S., Rottmayer, M., et al.: In situ dendrite suppression study of nanolayer encapsulated Li metal enabled by zirconia atomic layer deposition. ACS Appl. Mater. Interfaces 10, 32801–32808 (2018). https://doi.org/10.1021/acsami.8b08585
He, Y., Yu, X.Q., Wang, Y.H., et al.: Alumina-coated patterned amorphous silicon as the anode for a lithium-ion battery with high coulombic efficiency. Adv. Mater. 23, 1102568 (2011). https://doi.org/10.1002/adma.201102568
Kozen, A.C., Lin, C.F., Pearse, A.J., et al.: Next-generation lithium metal anode engineering via atomic layer deposition. ACS Nano 9, 5884–5892 (2015). https://doi.org/10.1021/acsnano.5b02166
Xiao, X.C., Lu, P., Ahn, D.: Ultrathin multifunctional oxide coatings for lithium ion batteries. Adv. Mater. 23, 1101915 (2011). https://doi.org/10.1002/adma.201101915
Wei, D.H., Zhong, S.Y., Zhang, H., et al.: In situ construction of interconnected SnO2/nitrogen-doped carbon@TiO2 networks for lithium-ion half/full cells. Electrochim. Acta 290, 312–321 (2018). https://doi.org/10.1016/j.electacta.2018.08.094
Wang, X.Y., Fan, L., Gong, D.C., et al.: Battery anodes: core-shell Ge@graphene@TiO2 nanofibers as a high-capacity and cycle-stable anode for lithium and sodium ion battery. Adv. Funct. Mater. 26, 1143 (2016). https://doi.org/10.1002/adfm.201670045
Cao, Y.Q., Meng, X.B., Elam, J.W.: Atomic layer deposition of LixAlyS solid-state electrolytes for stabilizing lithium-metal anodes. ChemElectroChem 3, 858–863 (2016). https://doi.org/10.1002/celc.201600139
Ahmed, B., Shahid, M., Nagaraju, D.H., et al.: Surface passivation of MoO3 nanorods by atomic layer deposition toward high rate durable Li ion battery anodes. ACS Appl. Mater. Interfaces 7, 13154–13163 (2015). https://doi.org/10.1021/acsami.5b03395
Liu, X., Sun, Q., Ng, A.M.C., et al.: An alumina stabilized graphene oxide wrapped SnO2 hollow sphere LIB anode with improved lithium storage. RSC Adv. 5, 100783–100789 (2015). https://doi.org/10.1039/C5RA22482A
Molina Piper, D., Son, S.B., Travis, J.J., et al.: Mitigating irreversible capacity losses from carbon agents via surface modification. J. Power Sources 275, 605–611 (2015). https://doi.org/10.1016/j.jpowsour.2014.11.032
Guan, D.S., Ma, L.L., Pan, D.Q., et al.: Atomic layer deposition of alumina coatings onto SnS2 for lithium-ion battery applications. Electrochim. Acta 242, 117–124 (2017). https://doi.org/10.1016/j.electacta.2017.05.023
Guan, D.S., Yuan, C.: Enhancing the cycling stability of tin sulfide anodes for lithium ion battery by titanium oxide atomic layer deposition. J. Electrochem. Energy Convers. Storage 13, 021004 (2016). https://doi.org/10.1115/1.4034809
Lv, X.X., Deng, J.J., Sun, X.H.: Cumulative effect of Fe2O3 on TiO2 nanotubes via atomic layer deposition with enhanced lithium ion storage performance. Appl. Surf. Sci. 369, 314–319 (2016). https://doi.org/10.1016/j.apsusc.2016.02.075
Cao, F., Xia, X.H., Pan, G.X., et al.: Construction of carbon nanoflakes shell on CuO nanowires core as enhanced core/shell arrays anode of lithium ion batteries. Electrochim. Acta 178, 574–579 (2015). https://doi.org/10.1016/j.electacta.2015.08.055
Chu, Y.L., Shen, Y.B., Guo, F., et al.: Advanced characterizations of solid electrolyte interphases in lithium-ion batteries. Electrochem. Energy Rev. 3, 187–219 (2020)
Ding, Z.L., Li, J.L., Li, J., et al.: Review—interfaces: key issue to be solved for all solid-state lithium battery technologies. J. Electrochem. Soc. 167, 070541 (2020). https://doi.org/10.1149/1945-7111/ab7f84
Liu, J., Wang, S., Qie, Y., et al.: Identifying lithium fluorides for promising solid-state electrolyte and coating material of high-voltage cathode. Mater. Today Energy 21, 100719 (2021). https://doi.org/10.1016/j.mtener.2021.100719
Zhang, T.F., He, W.J., Zhang, W., et al.: Designing composite solid-state electrolytes for high performance lithium ion or lithium metal batteries. Chem. Sci. 11, 8686–8707 (2020). https://doi.org/10.1039/d0sc03121f
Oh, D.Y., Kim, D.H., Jung, S.H., et al.: Single-step wet-chemical fabrication of sheet-type electrodes from solid-electrolyte precursors for all-solid-state lithium-ion batteries. J. Mater. Chem. A 5, 20771–20779 (2017). https://doi.org/10.1039/C7TA06873E
Pearse, A., Schmitt, T., Sahadeo, E., et al.: Three-dimensional solid-state lithium-ion batteries fabricated by conformal vapor-phase chemistry. ACS Nano 12, 4286–4294 (2018). https://doi.org/10.1021/acsnano.7b08751
Han, X.G., Gong, Y.H., Fu, K.K., et al.: Negating interfacial impedance in garnet-based solid-state Li metal batteries. Nat. Mater. 16, 572–579 (2017). https://doi.org/10.1038/nmat4821
Yan, P.F., Zheng, J.M., Liu, J., et al.: Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries. Nat. Energy 3, 600–605 (2018). https://doi.org/10.1038/s41560-018-0191-3
Tippens, J., Miers, J.C., Afshar, A., et al.: Visualizing chemomechanical degradation of a solid-state battery electrolyte. ACS Energy Lett. 4, 1475–1483 (2019). https://doi.org/10.1021/acsenergylett.9b00816
Wang, B.Q., Liu, J., Sun, Q., et al.: Atomic layer deposition of lithium phosphates as solid-state electrolytes for all-solid-state microbatteries. Nanotechnology 25, 504007 (2014). https://doi.org/10.1088/0957-4484/25/50/504007
Wang, B.Q., Liu, J., Norouzi Banis, M., et al.: Atomic layer deposited lithium silicates as solid-state electrolytes for all-solid-state batteries. ACS Appl. Mater. Interfaces 9, 31786–31793 (2017). https://doi.org/10.1021/acsami.7b07113
Liu, J., Banis, M.N., Li, X.F., et al.: Atomic layer deposition of lithium tantalate solid-state electrolytes. J. Phys. Chem. C 117, 20260–20267 (2013). https://doi.org/10.1021/jp4063302
Wang, B.Q., Zhao, Y., Banis, M.N., et al.: Atomic layer deposition of lithium niobium oxides as potential solid-state electrolytes for lithium-ion batteries. ACS Appl. Mater. Interfaces 10, 1654–1661 (2018). https://doi.org/10.1021/acsami.7b13467
Wang, H.Y., Wang, F.M.: Electrochemical investigation of an artificial solid electrolyte interface for improving the cycle-ability of lithium ion batteries using an atomic layer deposition on a graphite electrode. J. Power Sources 233, 1–5 (2013). https://doi.org/10.1016/j.jpowsour.2013.01.134
Kanno, R., Hata, T., Kawamoto, Y., et al.: Synthesis of a new lithium ionic conductor, thio-LISICON–lithium germanium sulfide system. Solid State Ion. 130, 97–104 (2000). https://doi.org/10.1016/S0167-2738(00)00277-0
Seino, Y., Ota, T., Takada, K., et al.: A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries. Energy Environ. Sci. 7, 627–631 (2014). https://doi.org/10.1039/C3EE41655K
Kozen, A.C., Pearse, A.J., Lin, C.F., et al.: Atomic layer deposition of the solid electrolyte LiPON. Chem. Mater. 27, 5324–5331 (2015). https://doi.org/10.1021/acs.chemmater.5b01654
Perng, Y.C., Cho, J., Sun, S.Y., et al.: Synthesis of ion conducting LixAlySizO thin films by atomic layer deposition. J. Mater. Chem. A 2, 9566–9573 (2014). https://doi.org/10.1039/C3TA14928E
Hornsveld, N., Put, B., Kessels, W.M.M., et al.: Plasma-assisted and thermal atomic layer deposition of electrochemically active Li2CO3. RSC Adv. 7, 41359–41368 (2017). https://doi.org/10.1039/c7ra07722j
Kazyak, E., Chen, K.H., Davis, A.L., et al.: Atomic layer deposition and first principles modeling of glassy Li3BO3-Li2CO3 electrolytes for solid-state Li metal batteries. J. Mater. Chem. A 6, 19425–19437 (2018). https://doi.org/10.1039/c8ta08761j
Pearse, A.J., Schmitt, T.E., Fuller, E.J., et al.: Nanoscale solid state batteries enabled by thermal atomic layer deposition of a lithium polyphosphazene solid state electrolyte. Chem. Mater. 29, 3740–3753 (2017). https://doi.org/10.1021/acs.chemmater.7b00805
Li, Y.F., Tan, Z.C.: Effects of a separator on the electrochemical and thermal performances of lithium-ion batteries: a numerical study. Energy Fuels 34, 14915–14923 (2020). https://doi.org/10.1021/acs.energyfuels.0c02609
Sheng, L., Xu, R., Zhang, H., et al.: The morphology of polyethylene (PE) separator for lithium-ion battery tuned by the extracting process. J. Electroanal. Chem. 873, 114391 (2020). https://doi.org/10.1016/j.jelechem.2020.114391
Liu, H.Y., Xu, J., Guo, B.H., et al.: Preparation and performance of silica/polypropylene composite separator for lithium-ion batteries. J. Mater. Sci. 49, 6961–6966 (2014)
Hsu, W.D., Yang, P.W., Chen, H.Y., et al.: Preferential lattice expansion of polypropylene in a trilayer polypropylene/polyethylene/polypropylene microporous separator in Li-ion batteries. Sci. Rep. 11, 1929 (2021). https://doi.org/10.1038/s41598-021-81644-3
Jang, J., Oh, J., Jeong, H., et al.: A review of functional separators for lithium metal battery applications. Materials (Basel) 13, 4625 (2020). https://doi.org/10.3390/ma13204625
Shi, C., Dai, J.H., Li, C., et al.: A modified ceramic-coating separator with high-temperature stability for lithium-ion battery. Polymers 9, 159 (2017). https://doi.org/10.3390/polym9050159
Jung, B., Lee, B., Jeong, Y.C., et al.: Thermally stable non-aqueous ceramic-coated separators with enhanced nail penetration performance. J. Power Sources 427, 271–282 (2019). https://doi.org/10.1016/j.jpowsour.2019.04.046
Chao, C.Y., Feng, Y.F., Hua, K., et al.: Enhanced wettability and thermal stability of polypropylene separators by organic-inorganic coating layer for lithium-ion batteries. J. Appl. Polym. Sci. 135, 46478 (2018). https://doi.org/10.1002/app.46478
Wang, X.R., Yushin, G.: Chemical vapor deposition and atomic layer deposition for advanced lithium ion batteries and supercapacitors. Energy Environ. Sci. 8, 1889–1904 (2015). https://doi.org/10.1039/C5EE01254F
Lee, H., Yanilmaz, M., Toprakci, O., et al.: A review of recent developments in membrane separators for rechargeable lithium-ion batteries. Energy Environ. Sci. 7, 3857–3886 (2014). https://doi.org/10.1039/C4EE01432D
Chen, H., Lin, Q., Xu, Q., et al.: Plasma activation and atomic layer deposition of TiO2 on polypropylene membranes for improved performances of lithium-ion batteries. J. Membr. Sci. 458, 217–224 (2014). https://doi.org/10.1016/j.memsci.2014.02.004
Shen, X., Li, C., Shi, C., et al.: Core-shell structured ceramic nonwoven separators by atomic layer deposition for safe lithium-ion batteries. Appl. Surf. Sci. 441, 165–173 (2018). https://doi.org/10.1016/j.apsusc.2018.01.222
Chao, C.H., Hsieh, C.T., Ke, W.J., et al.: Roll-to-roll atomic layer deposition of titania coating on polymeric separators for lithium ion batteries. J. Power Sources 482, 228896 (2021). https://doi.org/10.1016/j.jpowsour.2020.228896
Lee, J.W., Soomro, A.M., Waqas, M., et al.: A highly efficient surface modified separator fabricated with atmospheric atomic layer deposition for high temperature lithium ion batteries. Int. J. Energy Res. 44, 7035–7046 (2020). https://doi.org/10.1002/er.5371
Nathan, M., Golodnitsky, D., Yufit, V., et al.: Three-dimensional thin-film Li-ion microbatteries for autonomous MEMS. J. Microelectromechanical Syst. 14, 879–885 (2005). https://doi.org/10.1109/JMEMS.2005.851860
Dudney, N.J.: Solid-state thin-film rechargeable batteries. Mater. Sci. Eng. B 116, 245–249 (2005). https://doi.org/10.1016/j.mseb.2004.05.045
Long, J.W., Dunn, B., Rolison, D.R., et al.: Three-dimensional battery architectures. Chem. Rev. 104, 4463–4492 (2004). https://doi.org/10.1021/cr020740l