Elimination of defect and strain by functionalized CQDs dual-engineering for all-inorganic HTMs-free perovskite solar cells with an ultrahigh voltage of 1.651 V

Li, 2019, Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells, Nat. Energy, 4, 408, 10.1038/s41560-019-0382-6 Lin, 2022, All-perovskite tandem solar cells with improved grain surface passivation, Nature, 603, 73, 10.1038/s41586-021-04372-8 Zheng, 2017, Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations, Nat. Energy, 2, 17102, 10.1038/nenergy.2017.102 Jeong, 2020, Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3 V voltage loss, Science, 369, 1615, 10.1126/science.abb7167 He, 2021, CsPbBr3 perovskite detectors with 1.4% energy resolution for high-energy γ-rays, Nat. Photonics, 15, 36, 10.1038/s41566-020-00727-1 Best Research-Cell Efficiencies. 〈https://www.nrel.gov/pv/cell-efficiency.html〉. Wang, 2019, Stabilizing heterostructures of soft perovskite semiconductors, Science, 365, 687, 10.1126/science.aax8018 Liang, 2016, All-inorganic perovskite solar cells, J. Am. Chem. Soc., 138, 15829, 10.1021/jacs.6b10227 Jeon, 2014, Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells, Nat. Mater., 13, 897, 10.1038/nmat4014 Zheng, 2020, High-performance CsPbIxBr3–x all-inorganic perovskite solar cells with efficiency over 18% via spontaneous interfacial manipulation, Adv. Funct. Mater., 30, 2000457, 10.1002/adfm.202000457 Zhou, 2020, Photoactivated transition metal dichalcogenides to boost electron extraction for all-inorganic tri-brominated planar perovskite solar cells, J. Mater. Chem. A, 8, 7784, 10.1039/D0TA01645D Duan, 2018, High-purity inorganic perovskite films for solar cells with 9.72% efficiency, Angew. Chem., Int. Ed., 57, 3787, 10.1002/anie.201800019 Zhu, 2021, Ultraviolet filtration and defect passivation for efficient and photostable CsPbBr3 perovskite solar cells by interface engineering with ultraviolet absorber, Chem. Eng. J., 404, 10.1016/j.cej.2020.126548 Jiang, 2017, Polymer doping for high-efficiency perovskite solar cells with improved moisture stability, Adv. Energy Mater., 8, 1701757, 10.1002/aenm.201701757 Fakharuddin, 2018, Perovskite-polymer blends influencing microstructures, nonradiative recombination pathways, and photovoltaic performance of perovskite solar cells, ACS Appl. Mater. Interfaces, 10, 42542, 10.1021/acsami.8b18200 Zhang, 2018, A facile route to grain morphology controllable perovskite thin films towards highly efficient perovskite solar cells, Nano Energy, 53, 405, 10.1016/j.nanoen.2018.08.072 Jin, 2018, Additive engineering induced perovskite crystal growth for high performance perovskite solar cells, Org. Electron., 63, 207, 10.1016/j.orgel.2018.09.040 Zhu, 2020, Grain enlargement and defect passivation with melamine additives for high efficiency and stable CsPbBr3 perovskite solar cells, ChemSusChem, 13, 1834, 10.1002/cssc.201903288 Yang, 2019, Bi-functional additive engineering for high-performance perovskite solar cells with reduced trap density, J. Mater. Chem. A, 7, 6450, 10.1039/C8TA11925B Lin, 2020, A piperidinium salt stabilizes efficient metal-Halide perovskite solar cells, Science, 369, 96, 10.1126/science.aba1628 Bai, 2019, Planar perovskite solar cells with long-term stability using ionic liquid additives, Nature, 571, 245, 10.1038/s41586-019-1357-2 Yang, 2020, Buried interfaces in halide perovskite photovoltaics, Adv. Mater., 2006435 Dong, 2022, Chlorobenzenesulfonic potassium salts as the efficient multifunctional passivator for the buried interface in regular perovskite solar cells, Adv. Energy Mater., 2200417, 10.1002/aenm.202200417 Wang, 2014, Carbon quantum dots: synthesis, properties and applications, J. Mater. Chem. C, 2, 6921, 10.1039/C4TC00988F Zhou, 2017, Slow-photon-effect-induced photoelectrical-conversion efficiency enhancement for carbon-quantum-dot sensitized inorganic CsPbBr3 inverse opal perovskite solar cells, Adv. Mater., 29, 1703682, 10.1002/adma.201703682 Tang, 2021, Carbon quantum dot-passivated perovskite/carbon electrodes for stable solar cells, ACS Appl. Nano Mater., 4, 13339, 10.1021/acsanm.1c02850 Liu, 2020, Interface passivation treatment by halogenated low-dimensional perovskites for high-performance and stable perovskite photovoltaics, Nano Energy, 73, 10.1016/j.nanoen.2020.104753 Liu, 2021, Tailoring multifunctional passivation molecules with halogen functional groups for efficient and stable perovskite photovoltaics, Chem. Eng. J., 407, 10.1016/j.cej.2020.127204 Jeon, 2011, Fluorographene: a wide bandgap semiconductor with ultraviolet luminescence, ACS Nano, 5, 1042, 10.1021/nn1025274 Kang, 2013, Band offsets and heterostructures of two-dimensional semiconductors, Appl. Phys. Lett., 102, 10.1063/1.4774090 Li, 2011, photochemical chlorination of graphene, ACS Nano, 5, 5957, 10.1021/nn201731t Zheng, 2012, Production of graphite chloride and bromide using microwave sparks, Sci. Rep., 2, 662, 10.1038/srep00662 Bai, 2018, Interstitial Mn2+-driven high-aspect-ratio grain growth for low-trap-density microcrystalline films for record efficiency CsPbI2Br solar cells, ACS Energy Lett., 3, 970, 10.1021/acsenergylett.8b00270 Dong, 2015, Electron-hole diffusionlengths >175 μm in solution grown CH3NH3PbI3 single crystals, Science, 347, 967, 10.1126/science.aaa5760 Dong, 2017, Pseudohalide-induced recrystallization engineering for CH3NH3PbI3 film and its application in highly efficient inverted planar heterojunction perovskite solar cells, Adv. Funct. Mater., 28, 1704836, 10.1002/adfm.201704836 Wu, 2019, Highly efficient and stable perovskite solar cells via modification of energy levels at the perovskite/carbon electrode interface, Adv. Mater., 31, 1804284, 10.1002/adma.201804284 Crossland, 2013, Mesoporous TiO2 single crystals delivering enhanced mobility and optoelectronic device performance, Nature, 495, 215, 10.1038/nature11936 Chen, 2007, Titanium dioxide nanomaterials: synthesis, properties, modifications, and applications, Chem. Rev., 107, 2891, 10.1021/cr0500535 Zhang, 2021, Depth-dependent defect manipulation in perovskites for high-performance solar cells, Energy Environ. Sci., 14, 6526, 10.1039/D1EE02287C Liu, 2022, Highly improved efficiency and stability of planar perovskite solar cells via bifunctional phytic acid dipotassium anchored SnO2 electron transport layer, Appl. Surf. Sci., 588, 10.1016/j.apsusc.2022.152943 Wang, 2019, Interfacial residual stress relaxation in perovskite solar cells with improved stability, Adv. Mater., 31, 1904408, 10.1002/adma.201904408 Li, 2019, Anomalous interfacial stress generation during sodium intercalation/extraction in MoS2 thin-film anodes, Sci. Adv., 5, eaav2820, 10.1126/sciadv.aav2820 Zhu, 2021, Phase control of Cs-Pb-Br derivatives to suppress 0D Cs4PbBr6 for high-efficiency and stable all-inorganic CsPbBr3 perovskite solar cells, Small, 18, 2106323, 10.1002/smll.202106323 Duan, 2018, Lanthanide ions doped CsPbBr3 halides for HTM-free 10.14%-efficiency inorganic perovskite solar cell with an ultrahigh open-circuit voltage of 1.594 V, Adv. Energy Mater., 8, 1802346, 10.1002/aenm.201802346 Panigrahi, 2017, Imaging the anomalous charge distribution inside CsPbBr3 perovskite quantum dots sensitized solar cells, ACS Nano, 11, 10214, 10.1021/acsnano.7b04762 Zhu, 2020, Improved charge extraction through interface engineering for 10.12% efficiency and stable CsPbBr3 perovskite solar cells, J. Mater. Chem. A, 8, 20987, 10.1039/D0TA08675D Liu, 2019, Boosting the efficiency of carbon-based planar CsPbBr3 perovskite solar cells by a modified multistep spin-coating technique and interface engineering, Nano Energy, 56, 184, 10.1016/j.nanoen.2018.11.053 Huang, 2019, One-step solution deposition of CsPbBr3 based on precursor engineering for efficient all-inorganic perovskite solar cells, J. Mater. Chem. A, 7, 22420, 10.1039/C9TA08465G Liu, 2018, Efficient carbon-based CsPbBr3 inorganic perovskite solar cells by using Cu-phthalocyanine as hole transport material, Nano-Micro Lett., 10, 34, 10.1007/s40820-018-0187-3 Zhu, 2022, Efficient interface engineering of N, N′-Dicyclohexylcarbodiimide for stable HTMs-free CsPbBr3 perovskite solar cells with 10.16%-efficiency, Chem. Eng. J., 428, 10.1016/j.cej.2021.131950 Duan, 2021, Effect of side-group-regulated dipolar passivating molecules on CsPbBr3 perovskite solar cells, ACS Energy Lett., 6, 2336, 10.1021/acsenergylett.1c01060 Teng, 2018, Elegant face-down liquid-space-restricted deposition of CsPbBr3 films for efficient carbon-based all-inorganic planar perovskite solar cells, ACS Appl. Mater. Interfaces, 10, 9541, 10.1021/acsami.8b00358 Wang, 2021, Ionic liquid reducing energy loss and stabilizing CsPbI2Br solar cells, Nano Energy, 81, 10.1016/j.nanoen.2020.105631 Liu, 2018, High-performance planar perovskite solar cells using low temperature, solution-combustion-based nickel oxide hole transporting layer with efficiency exceeding 20%, Adv. Energy Mater., 8, 1703432, 10.1002/aenm.201703432