Elemental composition, topography, and wettability of the surface of graphite modified by ion-assisted deposition of chromium coatings

Allerton Press - Tập 49 - Trang 303-307 - 2008
I. S. Tashlykov1, S. M. Baraishuk1
1Department of General Physics, Belarussian State Pedagogical University, Minsk, Belarus

Tóm tắt

Elemental composition, roughness, and wettability of a graphite surface modified by ion-assisted deposition of a Cr coating ∼300–1000 nm thick are investigated using the methods of Rutherford backscattering, atomic force microscopy, and contact angle measurements. It is established that, in addition to chromium, coatings involve hydrogen, carbon, and oxygen from residual gases of a vacuum chamber because of their incomplete pumping by vacuum pumps and 1–2 at % silicon diffusing from the graphite. It is determined that, as the coating thickness increases, the surface roughness of the modified graphite increases and becomes the predominant factor in increasing its hydrophobicity.

Tài liệu tham khảo

Witke, T., Schuelke, T., Berthold, J. et al., Surf. Coat. Technol., 1999, vols. 116–119, p. 609. Gotoh, Y., Kagamimori, K., Tsuji, H., and Ishikawa, J., Surf. Coat. Technol., 2002, vols. 158–159, p. 729. Ueda, M., Lepienski, C.M., Rangel, E.C. et al., Surf. Coat. Technol., 2002, vol. 156, p. 190. Orfert, M. and Ritcher, K., Surf. Coat. Technol., 1999, vols. 116–119, p. 622. Karter, G., Kolligon, D., and Tashlykov, I.S., Perspekt. Mater., 1999, no. 1, p. 5. Wolf, G., Surf. Coat. Technol., 1990, vols. 43–44, p. 920. Colligon, J., J. Vac. Sci. Tekhnol., 1995, vol. 13, p. 1649. Ostrovskaya, L.Yu., Dementiev, A.P., Kulakova, I.I., and Ralchenko, V.G., Diamond Relat. Mater., 2005, nos. 3–7, p. 486. Tul’ev, V.V. and Tashlykov, I.S., Abstracts of Papers, VI Mezhdunarodnaya nauchnaya konferentsiya “Vzaimodeistvie izlucheniya s tverdym telom” (VI Int. Sci. Conf. on Interaction of Radiation with Solid), Minsk: BGU, 2005, p. 270. Pauleau, Y., Materials and Processes for Surface and Interface Engineering, NATO ASI Ser., London: Kluwer Acad. Publ., 1995, vol. 290, p. 475. Tashlykov, I.S., Kasperovich, A.V., and Wolf, G.K., Surf. Coat. Technol., 2002, vols. 158–159, p. 498. Tashlykov, I.S. and Belyi, I.M., Belarus Patent 2324, 1999. Doolittle, L.R., Nucl. Instrum. Methods Phys. Res., 1985, vol. B9, p. 227. Tul’ev, V.V. and Tashlykov, I.S., Fiz. Khim. Obrab. Mater., 2005, no. 3, p. 54. Tashlykov, I.S., Zukovski, P.V., Baraishuk, S.M., and Mikhalkovich, O.M., Radiat. Eff. Defect Solids, 2007, vol. 162, no. 9, p. 637. The Stopping and Range of Ions in Solids, Ziegler, J.E., Biersak, J.P., and Littmark, U., Eds., Oxford: Pergamon, 1985, vol. 1. Kutepov, A.M., Zakharov, A.G., and Maksimov, A.I., Vakuumnoe, plazmennoe i plazmenno-rastvornoe modifitsirovanie polimernykh materialov (Vacuum, Plasma, and Plasma-Solution Modification of Polymer Materials), Moscow: Nauka, 2004.