Electrospun nanofiber-based respiratory face masks—a review

S.E. Eikenberry, M. Mancuso, E. Iboi, T. Phan, K. Eikenberry, Y. Kuang, E. Kostelich, A.B. Gumel, To mask or not to mask: modeling the potential for face mask use by the general public to curtail the COVID-19 pandemic. Infect. Dis. Model. 5, 293–308 (2020). https://doi.org/10.1016/j.idm.2020.04.001

M.H. Chua, W. Cheng, S.S. Goh, J. Kong, B. Li, J.Y.C. Lim, L. Mao, S. Wang, K. Xue, L. Yang, E. Ye, K. Zhang, W.C.D. Cheong, B.H. Tan, Z. Li, B.H. Tan, X.J. Loh, Face masks in the new COVID-19 normal: materials, testing, and perspectives. Research 2020, 7286735 (2020). https://doi.org/10.34133/2020/7286735

E.L. Anderson, P. Turnham, J.R. Griffin, C.C. Clarke, Consideration of the aerosol transmission for COVID-19 and public health. Risk Anal. 40, 902–907 (2020). https://doi.org/10.1111/risa.13500

L. Morawska, D.K. Milton, It is time to address airborne transmission of coronavirus disease 2019 (COVID-19). Clin. Infect. Dis. 71, 2311–2313 (2020). https://doi.org/10.1093/cid/ciaa939

M. Liao, H. Liu, X. Wang, X. Hu, Y. Huang, X. Liu, K. Brenan, J. Mecha, M. Nirmalan, J.R. Lu, A technical review of face mask wearing in preventing respiratory COVID-19 transmission. Curr. Opin. Colloid Interface Sci. 52, 101417 (2021). https://doi.org/10.1016/j.cocis.2021.101417

H. Ueki, Y. Furusawa, K. Iwatsuki-Horimoto, M. Imai, H. Kabata, H. Nishimura, Y. Kawaoka, Effectiveness of face masks in preventing airborne transmission of SARS-CoV-2. MSphere 5, 2–6 (2020). https://doi.org/10.1128/msphere.00637-20

A. Agrawal, R. Bhardwaj, Reducing chances of COVID-19 infection by a cough cloud in a closed space. Phys. Fluids 32, 101704 (2020). https://doi.org/10.1063/5.0029186

A. Konda, A. Prakash, G.A. Moss, M. Schmoldt, G.D. Grant, S. Guha, Aerosol Filtration efficiency of common fabrics used in respiratory cloth masks. ACS Nano 14, 6339–6347 (2020). https://doi.org/10.1021/acsnano.0c03252

F. Drewnick, J. Pikmann, F. Fachinger, L. Moormann, F. Sprang, S. Borrmann, Aerosol filtration efficiency of household materials for homemade face masks: influence of material properties, particle size, particle electrical charge, face velocity, and leaks. Aerosol Sci. Technol. 55, 63–79 (2021). https://doi.org/10.1080/02786826.2020.1817846

P.W. Clapp, E.E. Sickbert-Bennett, J.M. Samet, J. Berntsen, K.L. Zeman, D.J. Anderson, D.J. Weber, W.D. Bennett, Evaluation of cloth masks and modified procedure masks as personal protective equipment for the public during the COVID-19 pandemic. JAMA Intern. Med. 27599, 1–7 (2020). https://doi.org/10.1001/jamainternmed.2020.8168

A.N. Desai, P. Mehrotra, Medical masks. JAMA 323, 1517–1518 (2020). https://doi.org/10.1001/jama.2020.2331

M. Karmacharya, S. Kumar, O. Gulenko, Y.-K. Cho, Advances in facemasks during the COVID-19 pandemic era. ACS Appl. Bio Mater. 4, 3891–3908 (2021). https://doi.org/10.1021/acsabm.0c01329

K.P. Singh, D. Mohan, G.S. Tandon, G.S.D. Gupta, Vapor-phase adsorption of hexane and benzene on activated carbon fabric cloth: equilibria and rate studies †. Ind. Eng. Chem. Res. 41, 2480–2486 (2002). https://doi.org/10.1021/ie0105674

J.G. McCulloch, The history of the development of melt blowing technology. Int. Nonwovens J. os-8, 1558925099os–80 (1999). https://doi.org/10.1177/1558925099OS-800123

P.K. Panda, B. Sahoo, Synthesis and Applications of Electrospun Nanofibers, in: N. Navaan, S. Sinha, J. Govil (Eds.), Nanotechnol. Vol 1 Fundam. Appl., 1st ed., Studium Press LLC, USA, Houston, Texas, 2013: pp. 399–416. https://www.researchgate.net/publication/259824059.

Z. Zhang, D. Ji, H. He, S. Ramakrishna, Electrospun ultrafine fibers for advanced face masks. Mater. Sci. Eng. R Reports 143, 100594 (2021). https://doi.org/10.1016/j.mser.2020.100594

A. Formhals, Process and apparatus for preparing artificial threads, 1,975,504, 1934.

S. Ramakrishna, K. Fujihara, W.E. Teo, T.C. Lim, Z. Ma, An introduction to electrospinning and nanofibers. World Scientific (2005). https://doi.org/10.1142/5894

J. Doshi, D.H. Reneker, Electrospinning process and applications of electrospun fibers, in: Conf. Rec. 1993 IEEE Ind. Appl. Conf. Twenty-Eighth IAS Annu. Meet., IEEE, 1993: pp. 1698–1703. https://doi.org/10.1109/IAS.1993.299067.

L. Persano, A. Camposeo, C. Tekmen, D. Pisignano, Industrial upscaling of electrospinning and applications of polymer nanofibers: a review. Macromol. Mater. Eng. 298, 504–520 (2013). https://doi.org/10.1002/mame.201200290

U. Ali, Y. Zhou, X. Wang, T. Lin, Direct electrospinning of highly twisted, continuous nanofiber yarns. J. Text. Inst. 103, 80–88 (2012). https://doi.org/10.1080/00405000.2011.552254

R.S. Barhate, S. Ramakrishna, Nanofibrous filtering media: filtration problems and solutions from tiny materials. J. Memb. Sci. 296, 1–8 (2007). https://doi.org/10.1016/j.memsci.2007.03.038

V.S. Naragund, P.K. Panda, Electrospun polyacrylonitrile nanofiber membranes for air filtration application. Int. J. Environ. Sci. Technol. (2021). https://doi.org/10.1007/s13762-021-03705-4

M. Cheng, Z. Qin, S. Hu, H. Yu, M. Zhu, Use of electrospinning to directly fabricate three-dimensional nanofiber stacks of cellulose acetate under high relative humidity condition. Cellulose 24, 219–229 (2017). https://doi.org/10.1007/s10570-016-1099-3

V.S. Naragund, P.K. Panda, Electrospinning of polyacrylonitrile nanofiber membrane for bacteria removal. J. Mater. Sci. Appl. 4, 68–74 (2018). https://doi.org/10.5281/zenodo.3344559

B. Sahoo, P.K. Panda, Synthesis and characterization of manganese tetroxide (Mn3O4) nanofibers by electrospinning technique. J. Adv. Ceram. 2, 26–30 (2013). https://doi.org/10.1007/s40145-013-0037-1

M. Chandraiah, B. Sahoo, P.K. Panda, Preparation and characterization of SnO2 nanofibers by electrospinning. Trans. Indian Ceram. Soc. 73, 266–269 (2014). https://doi.org/10.1080/0371750X.2014.923786

V.S. Naragund, P.K. Panda, Electrospinning of cellulose acetate nanofiber membrane using methyl ethyl ketone and N, N-dimethylacetamide as solvents. Mater. Chem. Phys. 240, 122147 (2020). https://doi.org/10.1016/j.matchemphys.2019.122147

T. Grafe, K. Graham, Nanofiber Webs from Electrospinning, in: Nonwovens Filtr. Int. Conf., 2003: pp. 1–5.

R. Wang, S. Guan, A. Sato, X. Wang, Z. Wang, R. Yang, B.S. Hsiao, B. Chu, Nanofibrous microfiltration membranes capable of removing bacteria, viruses and heavy metal ions. J. Memb. Sci. 446, 376–382 (2013). https://doi.org/10.1016/j.memsci.2013.06.020

X. Zhao, S. Wang, X. Yin, J. Yu, B. Ding, Slip-effect functional air filter for efficient purification of PM 2.5. Sci. Rep. 6, 1–11 (2016). https://doi.org/10.1038/srep35472

A. Raksa, P. Numpaisal, Y. Ruksakulpiwat, The effect of humidity during electrospinning on morphology and mechanical properties of SF/PVA nanofibers. Mater. Today Proc. 10–13 (2021). https://doi.org/10.1016/j.matpr.2021.03.459.

C.L. Casper, J.S. Stephens, N.G. Tassi, D.B. Chase, J.F. Rabolt, Controlling surface morphology of electrospun polystyrene fibers: effect of humidity and molecular weight in the electrospinning process. Macromolecules 37, 573–578 (2004). https://doi.org/10.1021/ma0351975

P.K. Szewczyk, D.P. Ura, U. Stachewicz, Humidity controlled mechanical properties of electrospun polyvinylidene fluoride (Pvdf) fibers. Fibers 8, 1–9 (2020). https://doi.org/10.3390/fib8100065

A. Koski, K. Yim, S. Shivkumar, Effect of molecular weight on fibrous PVA produced by electrospinning. Mater. Lett. 58, 493–497 (2004). https://doi.org/10.1016/S0167-577X(03)00532-9

T. Uyar, F. Besenbacher, Electrospinning of uniform polystyrene fibers: the effect of solvent conductivity. Polymer (Guildf). 49, 5336–5343 (2008). https://doi.org/10.1016/j.polymer.2008.09.025

T. Lin, H. Wang, H. Wang, X. Wang, The charge effect of cationic surfactants on the elimination of fibre beads in the electrospinning of polystyrene. Nanotechnology 15, 1375–1381 (2004). https://doi.org/10.1088/0957-4484/15/9/044

W. Liu, C. Huang, X. Jin, Electrospinning of grooved polystyrene fibers: effect of solvent systems. Nanoscale Res. Lett. 10, 237 (2015). https://doi.org/10.1186/s11671-015-0949-5

J.Y. Park, I.H. Lee, G.N. Bea, Optimization of the electrospinning conditions for preparation of nanofibers from polyvinylacetate (PVAc) in ethanol solvent. J. Ind. Eng. Chem. 14, 707–713 (2008). https://doi.org/10.1016/j.jiec.2008.03.006

R.R. Bresee, W.-C. Ko, Fiber formation during melt blowing. Int. Nonwovens J. os-12, 1558925003os–12 (2003). https://doi.org/10.1177/1558925003os-1200209

D. Das, R. Thakur, A.K. Pradhan, Optimization of corona discharge process using Box-Behnken design of experiments. J. Electrostat. 70, 469–473 (2012). https://doi.org/10.1016/j.elstat.2012.07.005

T. Grafe, K. Graham, Polymeric nanofibers and nanofiber webs: a new class of nonwovens. Int. Nonwovens J. os-12, 1558925003os–12 (2003). https://doi.org/10.1177/1558925003os-1200113

Z. Ma, M. Kotaki, S. Ramakrishna, Electrospun cellulose nanofiber as affinity membrane. J. Memb. Sci. 265, 115–123 (2005). https://doi.org/10.1016/j.memsci.2005.04.044

R.L. Shambaugh, A macroscopic view of the melt-blowing process for producing microfibers. Ind. Eng. Chem. Res. 27, 2363–2372 (1988). https://doi.org/10.1021/ie00084a021

C.J. Ellison, A. Phatak, D.W. Giles, C.W. Macosko, F.S. Bates, Melt blown nanofibers: fiber diameter distributions and onset of fiber breakup. Polymer (Guildf). 48, 3306–3316 (2007). https://doi.org/10.1016/j.polymer.2007.04.005

S.S. Ray, S.S. Chen, C.W. Li, N.C. Nguyen, H.T. Nguyen, A comprehensive review: electrospinning technique for fabrication and surface modification of membranes for water treatment application. RSC Adv. (2016). https://doi.org/10.1039/c6ra14952a

P.K. Panda, B. Sahoo, Water purification by removal of pathogens using electrospun polymer nanofiber membranes: a review. J. Mater. Sci. Appl. 5, 1–8 (2019) http://www.aascit.org/journal/archive2?journalId=891&paperId=7221

W.W.F. Leung, Q. Sun, Electrostatic charged nanofiber filter for filtering airborne novel coronavirus (COVID-19) and nano-aerosols. Sep. Purif. Technol. 250, 116886 (2020). https://doi.org/10.1016/j.seppur.2020.116886

R.L. Smith, R. Pieters, M.E. Morrison, Fundamentals of false-twist texturing of thermoplastic continuous filament yarns. Trans. Soc. Rheol. 16, 557–576 (1972). https://doi.org/10.1122/1.549264

ASTM F2100–20, Standard Specification for Performance of Materials Used in Medical Face Masks, in: F23.40 (Ed.), Occup. Heal. Safety; Prot. Cloth., 2020th ed., ASTM International, West Conshohocken, PA, 2020: p. 4. https://doi.org/10.1520/F2100-20.

S. Rengasamy, R. Shaffer, B. Williams, S. Smit, A comparison of facemask and respirator filtration test methods. J. Occup. Environ. Hyg. 14, 92–103 (2017). https://doi.org/10.1080/15459624.2016.1225157

BS EN149:2001+A1, BS EN149: 2001 + A1 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking, 2009.

V.R. Gaitan, L. Alejandra, COVID-19 technical specifications for personal protective equipment and related IPC supplies. World Heal. Organ. 57 (2020). https://www.who.int/medical_devices/priority/Technical_Specs_PPE_Covid19_final_V6.docx?ua=1. Accessed February 27, 2020.

V. Shanmugam, K. Babu, T.F. Garrison, A.J. Capezza, R.T. Olsson, S. Ramakrishna, M.S. Hedenqvist, S. Singha, M. Bartoli, M. Giorcelli, G. Sas, M. Försth, O. Das, Á. Restás, F. Berto, Potential natural polymer-based nanofibres for the development of facemasks in countering viral outbreaks. J. Appl. Polym. Sci. 138(27), 50658 (2021). https://doi.org/10.1002/app.50658

CEN/TC 205/WG 14, EN 14683:2019+AC:2019 (E) Medical face masks - requirements and test methods, Brussels, 2019.

J. Yuk, B. Anuj, C. Benjamin, F. Karl, M. Daniel, C. Chun-I, J. Ashley, B. Saikat, C. Leonardo, J. Sunghwan, 3D-printing Mask filters inspired by animal nasal cavity, in: Bull. Am. Phys. Soc., American Physical Society, Chicago, 2020.

H. Liu, L. Liu, J. Yu, X. Yin, B. Ding, High-efficiency and super-breathable air filters based on biomimetic ultrathin nanofiber networks. Compos. Commun. 22, 100493 (2020). https://doi.org/10.1016/j.coco.2020.100493

P. Piombino, U. Committeri, G. Norino, L.A. Vaira, S. Troise, F. Maglitto, D. Mariniello, G. De Riu, L. Califano, Facing COVID-19 pandemic: development of custom-made face mask with rapid prototyping system. J. Infect. Dev. Ctries. 15, 51–57 (2021). https://doi.org/10.3855/jidc.13384

R. Zhang, Q. Xu, S. Bai, J. Hai, L. Cheng, G. Xu, Y. Qin, Enhancing the filtration efficiency and wearing time of disposable surgical masks using TENG technology. Nano Energy 79, 105434 (2021). https://doi.org/10.1016/j.nanoen.2020.105434

Y. Si, Z. Zhang, W. Wu, Q. Fu, K. Huang, N. Nitin, B. Ding, G. Sun, Daylight-driven rechargeable antibacterial and antiviral nanofibrous membranes for bioprotective applications. Sci. Adv. 4, eaar5931 (2018). https://doi.org/10.1126/sciadv.aar5931

S. Choi, R. Park, N. Hur, W. Kim, Evaluation of wearing comfort of dust masks. PLoS ONE 15, 1–13 (2020). https://doi.org/10.1371/journal.pone.0237848

K.P. Lee, J. Yip, C.W. Kan, J.C. Chiou, K.F. Yung, Reusable face masks as alternative for disposable medical masks: factors that affect their wear-comfort. Int. J. Environ. Res. Public Health 17, 1–16 (2020). https://doi.org/10.3390/ijerph17186623

A. Yang, L. Cai, R. Zhang, J. Wang, P.-C. Hsu, H. Wang, G. Zhou, J. Xu, Y. Cui, Thermal management in nanofiber-based face mask. Nano Lett. 17, 3506–3510 (2017). https://doi.org/10.1021/acs.nanolett.7b00579

H. Alenezi, M.E. Cam, M. Edirisinghe, A novel reusable anti-COVID-19 transparent face respirator with optimized airflow. Bio-Design Manuf. 4, 1–9 (2021). https://doi.org/10.1007/s42242-020-00097-1

S. Ullah, A. Ullah, J. Lee, Y. Jeong, M. Hashmi, C. Zhu, K. Il Joo, H.J. Cha, I.S. Kim, Reusability comparison of melt-blown vs nanofiber face mask filters for use in the coronavirus pandemic. ACS Appl. Nano Mater. 3, 7231–7241 (2020). https://doi.org/10.1021/acsanm.0c01562

S. Park, H.Y. Koo, C. Yu, W.S. Choi, A novel approach to designing air filters: ubiquitous material-based Janus air filter modules with hydrophilic and hydrophobic parts. Chem. Eng. J. 410, 128302 (2021). https://doi.org/10.1016/j.cej.2020.128302

S.S. Ray, Y.I. Park, H. Park, S.E. Nam, I.C. Kim, Y.N. Kwon, Surface innovation to enhance anti-droplet and hydrophobic behavior of breathable compressed-polyurethane masks. Environ. Technol. Innov. 20, 101093 (2020). https://doi.org/10.1016/j.eti.2020.101093

T.L. Phan, C.T.-S. Ching, A reusable mask for coronavirus disease 2019 (COVID-19). Arch. Med. Res. 51, 455–457 (2020). https://doi.org/10.1016/j.arcmed.2020.04.001

G.R.J. Swennen, L. Pottel, P.E. Haers, Custom-made 3D-printed face masks in case of pandemic crisis situations with a lack of commercially available FFP2/3 masks. Int. J. Oral Maxillofac. Surg. 49, 673–677 (2020). https://doi.org/10.1016/j.ijom.2020.03.015

H. Zhong, Z. Zhu, J. Lin, C.F. Cheung, V.L. Lu, F. Yan, C.-Y. Chan, G. Li, Reusable and recyclable graphene masks with outstanding superhydrophobic and photothermal performances. ACS Nano 14, 6213–6221 (2020). https://doi.org/10.1021/acsnano.0c02250

Z. Lin, Z. Wang, X. Zhang, D. Diao, Superhydrophobic, photo-sterilize, and reusable mask based on graphene nanosheet-embedded carbon (GNEC) film. Nano Res. 14, 1110–1115 (2021). https://doi.org/10.1007/s12274-020-3158-1

L. Huang, S. Xu, Z. Wang, K. Xue, J. Su, Y. Song, S. Chen, C. Zhu, B.Z. Tang, R. Ye, Self-reporting and photothermally enhanced rapid bacterial killing on a laser-induced graphene mask. ACS Nano 14, 12045–12053 (2020). https://doi.org/10.1021/acsnano.0c05330

H. Lee, S. Jeon, Polyacrylonitrile nanofiber membranes modified with Ni-based conductive metal organic frameworks for air filtration and respiration monitoring. ACS Appl. Nano Mater. 3, 8192–8198 (2020). https://doi.org/10.1021/acsanm.0c01619

P. Jiamjirangkul, T. Inprasit, V. Intasanta, A. Pangon, Metal organic framework-integrated chitosan/poly(vinyl alcohol) (PVA) nanofibrous membrane hybrids from green process for selective CO2 capture and filtration. Chem. Eng. Sci. 221, 115650 (2020). https://doi.org/10.1016/j.ces.2020.115650

S. Li, R. Zhang, J. Xie, D.E. Sameen, S. Ahmed, J. Dai, W. Qin, S. Li, Y. Liu, Electrospun antibacterial poly(vinyl alcohol)/Ag nanoparticles membrane grafted with 3,3′,4,4′-benzophenone tetracarboxylic acid for efficient air filtration. Appl. Surf. Sci. 533, 147516 (2020). https://doi.org/10.1016/j.apsusc.2020.147516

A. Vanangamudi, S. Hamzah, G. Singh, Synthesis of hybrid hydrophobic composite air filtration membranes for antibacterial activity and chemical detoxification with high particulate filtration efficiency (PFE). Chem. Eng. J. 260, 801–808 (2015). https://doi.org/10.1016/j.cej.2014.08.062

M. Zhu, R. Xiong, C. Huang, Bio-based and photocrosslinked electrospun antibacterial nanofibrous membranes for air filtration. Carbohydr. Polym. 205, 55–62 (2019). https://doi.org/10.1016/j.carbpol.2018.09.075

H. Khanzada, A. Salam, M.B. Qadir, D.N. Phan, T. Hassan, M.U. Munir, K. Pasha, N. Hassan, M.Q. Khan, I.S. Kim, Fabrication of promising antimicrobial aloe vera/PVA electrospun nanofibers for protective clothing. Materials (Basel). 13, 3884 (2020). https://doi.org/10.3390/MA13173884

S. Choi, H. Jeon, M. Jang, H. Kim, G. Shin, J.M. Koo, M. Lee, H.K. Sung, Y. Eom, H.S. Yang, J. Jegal, J. Park, D.X. Oh, S.Y. Hwang, Biodegradable, efficient, and breathable multi-use face mask filter. Adv. Sci. 8, 2003155 (2021). https://doi.org/10.1002/advs.202003155

D.S. de Almeida, L.D. Martins, E.C. Muniz, A.P. Rudke, R. Squizzato, A. Beal, P.R. de Souza, D.P.F. Bonfim, M.L. Aguiar, M.L. Gimenes, Biodegradable CA/CPB electrospun nanofibers for efficient retention of airborne nanoparticles. Process Saf. Environ. Prot. 144, 177–185 (2020). https://doi.org/10.1016/j.psep.2020.07.024

V. Kadam, Y.B. Truong, J. Schutz, I.L. Kyratzis, R. Padhye, L. Wang, Gelatin/β–cyclodextrin bio–nanofibers as respiratory filter media for filtration of aerosols and volatile organic compounds at low air resistance. J. Hazard. Mater. 403, 123841 (2021). https://doi.org/10.1016/j.jhazmat.2020.123841

K. Pal, G.Z. Kyzas, S. Kralj, F.G. de Souza, Sunlight sterilized, recyclable and super hydrophobic anti-COVID laser-induced graphene mask formulation for indelible usability. J. Mol. Struct. 1233, 130100 (2021). https://doi.org/10.1016/j.molstruc.2021.130100

J. van den Broek, I.C. Weber, A.T. Güntner, S.E. Pratsinis, Highly selective gas sensing enabled by filters. Mater. Horizons (2021). https://doi.org/10.1039/D0MH01453B

D.K. Yoo, H.C. Woo, S.H. Jhung, Removal of particulate matter with metal–organic framework-incorporated materials. Coord. Chem. Rev. 422, 213477 (2020). https://doi.org/10.1016/j.ccr.2020.213477

G. Pullangott, U. Kannan, S. Gayathri, D.V. Kiran, S.M. Maliyekkal, A comprehensive review on antimicrobial face masks: an emerging weapon in fighting pandemics. RSC Adv. 11, 6544–6576 (2021). https://doi.org/10.1039/D0RA10009A

M.A. Chowdhury, M.B.A. Shuvho, M.A. Shahid, A.K.M.M. Haque, M.A. Kashem, S.S. Lam, H.C. Ong, M.A. Uddin, M. Mofijur, Prospect of biobased antiviral face mask to limit the coronavirus outbreak. Environ. Res. 192, 110294 (2021). https://doi.org/10.1016/j.envres.2020.110294

S. Faucher, D.J. Lundberg, X.A. Liang, X. Jin, R. Phillips, D. Parviz, J. Buongiorno, M.S. Strano, A virucidal face mask based on the reverse flow reactor concept for thermal inactivation of SARS-CoV-2. AIChE J. 67(6), e17250 (2021). https://doi.org/10.1002/aic.17250

O.O. Fadare, B. Wan, L.-H. Guo, L. Zhao, Microplastics from consumer plastic food containers: are we consuming it? Chemosphere 253, 126787 (2020). https://doi.org/10.1016/j.chemosphere.2020.126787

O.O. Fadare, E.D. Okoffo, Covid-19 face masks: a potential source of microplastic fibers in the environment. Sci. Total Environ. 737, 140279 (2020). https://doi.org/10.1016/j.scitotenv.2020.140279

S. Ma, M. Zhang, J. Nie, J. Tan, B. Yang, S. Song, Design of double-component metal–organic framework air filters with PM2.5 capture, gas adsorption and antibacterial capacities. Carbohydr. Polym. 203, 415–422 (2019). https://doi.org/10.1016/j.carbpol.2018.09.039

Geochanvre, Geochanvre Masque Biocompostable. 2 (2020). https://www.geochanvre.fr/wp-content/uploads/2020/10/200908_MasqueBiocompostable_Geochanvre_Fiche_Produit_UNS1.pdf. accessed June 27, 2021.