Electrophoretic graphene oxide surface passivation on titanium dioxide for dye sensitized solar cell application

Yu, 2012, Nanomaterials and nanostructures for efficient light absorption and photovoltaics, Nano Energy, 1, 57, 10.1016/j.nanoen.2011.10.002 Nithiyanantham, 2014, Supercapacitor and dye-sensitized solar cell (DSSC) applications of shape-selective TiO2 nanostructures, RSC Adv., 4, 35659, 10.1039/C4RA06226D Kumar, 2017, Quantum-sized nanomaterials for solar cell applications, Renew. Sustain. Energy Rev., 73, 821, 10.1016/j.rser.2017.01.172 Chen, 2012, Hierarchically micro/nanostructured photoanode materials for dye-sensitized solar cells, J. Mater. Chem., 22, 15475, 10.1039/c2jm32402d Raj, 2016, A critical review of recent developments in nanomaterials for photoelectrodes in dye sensitized solar cells, J. Power Sources, 317, 120, 10.1016/j.jpowsour.2016.03.016 Boro, 2018, Nano-structured TiO2/ZnO nanocomposite for dye-sensitized solar cells application: a review, Renew. Sustain. Energy Rev., 81, 2264, 10.1016/j.rser.2017.06.035 Dhas, 2011, Enhanced DSSC performance with high surface area thin anatase TiO2 nanoleaves, Sol. Energy, 85, 1213, 10.1016/j.solener.2011.02.029 Gopakumar, 2018, MoO3 surface passivation on TiO2: an efficient approach to minimize loss in fill factor and maximum power of dye sensitized solar cell, Appl. Surf. Sci., 447, 554, 10.1016/j.apsusc.2018.04.013 Das, 2016, Influence of surface disorder, oxygen defects and bandgap in TiO2 nanostructures on the photovoltaic properties of dye sensitized solar cells, Sol. Energy Mater. Sol. Cells, 144, 194, 10.1016/j.solmat.2015.08.036 Sivaranjani, 2012, Toward a quantitative correlation between microstructure and DSSC efficiency: a case study of TiO2–xNx nanoparticles in a disordered mesoporous framework, J. Phy. Chem. C, 116, 2581, 10.1021/jp210677d Liu, 2016, Titanium dioxide/graphene anode for enhanced charge-transfer in dye-sensitized solar cell, Synth. Met., 222, 219, 10.1016/j.synthmet.2016.10.021 Hallam, 2011, A facile approach for quantifying the density of defects (edge plane sites) of carbon nanomaterials and related structures, Phys. Chem. Chem. Phys., 13, 1210, 10.1039/C0CP01562H Das, 2018, Improved efficiency of ZnO hierarchical particle based dye sensitized solar cell by incorporating thin passivation layer in photo-anode, Appl. Phys. A, 124, 80, 10.1007/s00339-017-1486-0 Pascoe, 2013, Surface state recombination and passivation in nanocrystalline TiO2 dye-sensitized solar cells, J. Phys. Chem., C117, 25118, 10.1021/jp408055g Jin, 2012, The effect of RF-sputtered TiO2 passivating layer on the performance of dye sensitized solar cells, Ceram. Int., 38, S505, 10.1016/j.ceramint.2011.05.064 Jeong, 2011, Thickness effect of RF sputtered TiO2 passivating layer on the performance of dye-sensitized solar cells, Sol. Energy Mater. Sol. Cells, 95, 344, 10.1016/j.solmat.2010.02.008 Brady, 2019, An insulating Al2O3 overlayer prevents lateral hole hopping across dye-sensitized TiO2 surfaces, ACS Appl. Mater. Interfaces, 11, 27453, 10.1021/acsami.9b08051 Li, 2019, Atomic layer deposition: a versatile method to enhance TiO2 nanoparticles interconnection of dye-sensitized solar cell at low temperature, J. Ind. Eng. Chem., 73, 351, 10.1016/j.jiec.2019.02.006 Pascoe, 2013, Surface state recombination and passivation in nanocrystalline TiO2 dye-sensitized solar cells, J. Phys. Chem. C, 117, 25118, 10.1021/jp408055g Shanmugam, 2010, Effect of atomic layer deposited ultra thin HfO2 and Al2O3 interfacial layers on the performance of dye sensitized solar cells, Thin Solid Films, 518, 2678, 10.1016/j.tsf.2009.08.033 Bella, 2019, Boosting the efficiency of aqueous solar cells: a photoelectrochemical estimation on the effectiveness of TiCl4 treatment, Electrochim. Acta, 302, 31, 10.1016/j.electacta.2019.01.180 Choi, 2012, The effect of TiCl4-treated TiO2 compact layer on the performance of dye-sensitized solar cell, Curr. Appl. Phys., 12, 737, 10.1016/j.cap.2011.10.011 Adli, 2017, Effects of TiCl4 treatment on the structural and electrochemical properties of a porous TiO2 layer in CH3NH3PbI3 perovskite solar cells, Phys. Chem. Chem. Phy., 19, 26898, 10.1039/C7CP04132B Gao, 2017, CoNi alloy incorporated, N doped porous carbon as efficient counter electrode for dye-sensitized solar cell, J. Power Sources, 348, 158, 10.1016/j.jpowsour.2017.03.009 Jayaweera, 2017, Vein graphite-based counter electrodes for dye-sensitized solar cells, J. Photochem. Photobiol. A, 344, 78, 10.1016/j.jphotochem.2017.05.009 Lee, 2010, A comparative study of dye-sensitized solar cells added carbon nanotubes to electrolyte and counter electrodes, Sol. Energy Mater. Sol. Cells, 94, 680, 10.1016/j.solmat.2009.11.030 Gao, 2018, High-efficiency magnetic carbon spheres counter electrode for dye-sensitized solar cell, Electrochim. Acta, 264, 312, 10.1016/j.electacta.2018.01.134 Asmatulu, 2016, Integrating graphene and C60 into TiO2 nanofibers via electrospinning process for enhanced conversion efficiencies of DSSCs, Macromol. Symp., 365, 128, 10.1002/masy.201650006 Sahoo, 2012, Graphene-based materials for energy conversion, Adv. Mater., 24, 4203, 10.1002/adma.201104971 Zhu, 2010, Graphene and graphene oxide: synthesis, properties, and applications, Adv. Mater., 22, 3906, 10.1002/adma.201001068 Georgakilas, 2016, Noncovalent functionalization of graphene and graphene oxide for energy materials, biosensing, catalytic, and biomedical applications, Chem. Rev., 116, 5464, 10.1021/acs.chemrev.5b00620 Ambrosi, 2016, Electrochemically exfoliated graphene and graphene oxide for energy storage and electrochemistry applications, Chem. Eur J., 22, 153, 10.1002/chem.201503110 Ma, 2018, Electrophoretic deposition of graphene-based materials: a review of materials and their applications, J. Materiomics, 4, 108, 10.1016/j.jmat.2018.02.004 Wang, 2016, Electrophoretic deposition of graphene oxide on continuous carbon fibers for reinforcement of both tensile and interfacial strength, Compos. Sci. Technol., 135, 46, 10.1016/j.compscitech.2016.07.009 Mahshid, 2009, Mixed-phase TiO2 nanoparticles preparation using sol–gel method, J. Alloys Compd., 478, 586, 10.1016/j.jallcom.2008.11.094