Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Tổng hợp bột iridi từ quá trình điện hóa với diện tích bề mặt riêng lớn
Tóm tắt
Việc tổng hợp bột iridi trong môi trường nóng chảy NaCl-KCl ở nhiệt độ 700°C được thực hiện lần đầu tiên. Ảnh hưởng của tỷ lệ mật độ dòng điện ở catot so với anot (i_c/i_a) đến cấu trúc và hình thái của bột iridi được nghiên cứu. Bột iridi đơn pha và đa tinh thể với diện tích bề mặt riêng đạt 16.8 m2/g được sản xuất. Thành phần pha và kết cấu bề mặt của các phần lắng được nghiên cứu. Diện tích bề mặt riêng và kích thước hạt của bột iridi được phân tích như là các hàm của tỷ lệ i_c/i_a.
Từ khóa
#tổng hợp điện hóa #bột iridi #diện tích bề mặt riêng #mật độ dòng điện #cấu trúc vật liệuTài liệu tham khảo
L. Zhu, S. Bai, H. Zhang, and Y. Ye, “Laminar iridium coating produced by pulse current electrodeposition from chloride molten salt,” Appl. Surf. Sci. 282, 820–825 (2013).
Yu. Huang, S. Bai, H. Zhang, and Y. Ye, “Growth mechanism and mechanical property of laminar iridium coating by electrodeposition,” Int. J. Refract. Met. Hard Mater. 50, 204–209 (2015).
R. Amrousse, T. Katsumi, Y. Niboshi, N. Azuma, A. Bachar, and K. Hori, “Performance and deactivation of Ir-based catalyst during hydroxylammonium nitrate catalytic decomposition,” Appl. Catal., A 452, 64–68 (2013).
N. A. Saltykova, O. V. Portnyagin, and L. T. Kosichin, RF Patent 2249062, 2005.
C. Du, Z. Wang, J. Hou, S. Jiao, and H. Zhu, “Production of titanium powder by sodiothermic reduction in CaCl2 molten salts,” Metall. Mater. Trans. B 45, 1750–1756 (2014).
C. Mateos-Pedrero, H. Silva, D. A. Pacheco, S. Liguori, A. Iulianelli, A. Basile, and A. Mendes, “CuO/ZnO catalysts for methanol steam reforming: the role of the support polarity ratio and surface area,” Appl. Catal., B 174, 67–76 (2015).
R. Redon, F. Ramirez-Crescencio, and A. L. Fernandez-Osorio, “Solventless synthesis of iridium(0) nanoparticles,” J. Nanopart Res. 13, 5959–5965 (2011).
N. A. Saltykova and O. V. Portnyagin, “Electrodeposition of Ir–Ru alloys from chloride melts: steady-state potentials and cathodic processes,” Russ. J. Electrochem. 36 (7), 784–788 (2000).
A. N. Baraboshkin, Electrocrystallization of Metals from Molten Salts (Nauka, Moscow, 1976).
D. R. Sadoway, “Toward new technologies for the production of lithium,” JOM 50 (5), 24–26 (1998).
A. N. Baraboshkin, M. V. Smirnov, and N. A. Saltykova, “Cathode processes at current densities over the limit diffusion,” in Transactions of Institute of Electrochemistry, UrO RAN USSR (Sverdlovsk, 1961), Vol. 2, pp. 41–52.
B. Liang, Y. Liu, and Y. Xu, “Silicon-based materials as high capacity anodes for next generation lithium ion batteries,” Power Sources 267, 469–490 (2014).
R. A. Sharma and I. Johnson, “Study of the reduction of UO2 by magnesium or calcium dissolved in molten chlorides,” Metall. Trans. 1 (1), 291–297 (1970).