Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist

Kligerman, 2005, Improving tribological performance of piston rings by partial surface texturing, J Tribol-T ASME, 127, 632, 10.1115/1.1866171

Nakano, 2007, Applying micro-texture to cast iron surfaces to reduce the friction coefficient under lubricated conditions, Tribol Lett, 28, 131, 10.1007/s11249-007-9257-2

Bruzzone, 2008, Advances in engineered surfaces for functional performance, CIRP Ann – Manuf Technol, 57, 750, 10.1016/j.cirp.2008.09.003

Greco, 2009, Surface texturing of tribological interfaces using the vibromechanical texturing method, J Manuf Sci E-T ASME, 131, 061005, 10.1115/1.4000418

Bao, 2008, Aviation-oriented micromachining technology—micro-ECM in pure water, Chin J Aeronaut, 21, 455, 10.1016/S1000-9361(08)60059-X

Rajurkar, 1999, New developments in electro-chemical machining, CIRP Ann – Manuf Technol, 48, 567, 10.1016/S0007-8506(07)63235-1

Zhu, 2013, Trajectory control strategy of cathode in blisk electrochemical machining, Chin J Aeronaut, 26, 1064, 10.1016/j.cja.2013.06.012

Natsu, 2007, Generating complicated surface with electrolyte jet machining, Precis Eng, 31, 33, 10.1016/j.precisioneng.2006.02.004

Nouraeiz, 2008, Electrochemical process for micropattern transfer without photolithography: a modeling analysis, J Electrochem Soc, 155, D97, 10.1149/1.2806032

Costa, 2009, Development of a maskless electrochemical texturing method, J Mater Process Technol, 209, 3869, 10.1016/j.jmatprotec.2008.09.004

Byun, 2010, Surface texturing by micro ECM for friction reduction, Int J Precis Eng Manuf, 11, 747, 10.1007/s12541-010-0088-y

Qian, 2010, Generating micro-dimples array on the hard chrome-coated surface by modified through mask electrochemical micromachining, Int J Adv Manuf Technol, 47, 1121, 10.1007/s00170-009-2246-x

Hao, 2011, Surface micro-texturing of metallic cylindrical surface with proximity rolling-exposure lithography and electrochemical micromachining, Appl Surf Sci, 257, 8906, 10.1016/j.apsusc.2011.05.061

Zhu, 2009, Electrochemical micromachining of microstructures of micro hole and dimple array, CIRP Ann – Manuf Technol, 58, 177, 10.1016/j.cirp.2009.03.004

Landol, 2003, Electrochemical micromachining, polishing and surface structuring of metals: fundamental aspects and new developments, Electrochim Acta, 48, 3185, 10.1016/S0013-4686(03)00368-2

Kukharenka, 2003, Electroplating moulds using dry film thick negative photoresist, J Micromech Microeng, 13, S67, 10.1088/0960-1317/13/4/311

Vulto, 2005, Microfluidic channel fabrication in dry film resist for production and prototyping of hybrid chips, Lab Chip, 5, 158, 10.1039/b411885e

Zhu, 2008, Micro electroforming of high-aspect-ratio metallic microstructures by using a movable mask, CIRP Ann – Manuf Technol, 57, 227, 10.1016/j.cirp.2008.03.092

Hackert-Oschaetzchen, 2013, Microstructuring of carbide metals applying Jet Electrochemical Machining, Precis Eng, 37, 621, 10.1016/j.precisioneng.2013.01.007

Shin, 2011, Analysis of machining characteristics in electrochemical etching using laser masking, Appl Surf Sci, 258, 1689, 10.1016/j.apsusc.2011.10.010

Wang, 2012, Numerical and experimental study on fabrication of microstructure array with topographical gradient via through-mask EMM, Adv Mater Res, 528, 254, 10.4028/www.scientific.net/AMR.528.254

Kikuchi, 2013, Aluminum bulk micromachining through an anodic oxide mask by electrochemical etching in an acetic acid/perchloric acid solution, Microelectron Eng, 111, 14, 10.1016/j.mee.2013.05.007

Qu, 2013, Wire electrochemical machining with axial electrolyte flushing for titanium alloy, Chin J Aeronaut, 26, 22, 10.1016/j.cja.2012.12.026