Electrochemical fabrication of Ag–Cu nano alloy and its characterization: an investigation

Journal of Nanostructure in Chemistry - Tập 5 - Trang 383-392 - 2015
A. Abdul Salam1, R. Singaravelan2, P. Vasanthi1, S. Bangarusudarsan Alwar2
1Department of Civil Engineering, B. S. Abdur Rahman University, Chennai, India
2Post Graduate and Research Department of Chemistry, D. G. Vaishnav College, Chennai, India

Tóm tắt

An Ag–Cu (AC) bimetallic alloy nanoparticles in various proportions were fabricated by facile electrochemical process is presented in this work. Apart from the electrochemical method of synthesis, the surface morphology, crystal structure and texture as well as the optical properties of the nano alloy have been investigated. The surface morphology and the particle size of the Ag–Cu deposits were deliberated by scanning electron microscopic studies. The preferred orientation and average particle size of the AC NTs were obtained by X-ray diffraction analysis. The well-dispersed AC nano alloy (NA) exhibited ultrafine size and high crystallinity corresponding to face centered cubic Ag and Cu. Ultraviolet–visible spectroscopy was performed to study the optical properties of the nano alloy and the results showed that the nano alloys have wide band gap energies 3.18, 3.57 and 3.03 eV for AgCu, AgCu2 and AgCu3 NAs, respectively. The studies on size, morphology and composition of the nanoparticles were performed by means of transmission electron microscopy, and energy dispersive X-ray Analysis.

Tài liệu tham khảo

Mazzola, L.: Commercializing nanotechnology, Nat. Biotech. 21, 1137–1143 (2003) Anselmann, R.: Nanoparticles and nano layers in commercial applications, J Nano Part. Res. 3, 329–336 (2001) Bonnemann, H., Richards, R.: Nanoscopic metal particles—synthetic methods and potential applications. Eur. J. Inorg. Chem. 10, 2455–2480 (2001) Biswas, P., Wu, C.Y.: Nanoparticles and the environment—a critical review paper. J. Air Waste Manag. Assoc. 55, 708–746 (2005) Jiang, T., Huai, Q., Geng, T., Ying, W., Xiao, T., Cao, F.: Catalytic performance of PdeNi bimetallic catalyst for glycerol hydrogenolysis. Biomass Bioenergy 78, 71–79 (2015) Liu, X., Wang, D., Li, Y.: Synthesis and catalytic properties of bimetallic nanomaterials with various architectures. Nano Today 7, 448–466 (2012) Godinez-Garcia, A., Perez-Robles, J.F., Martinez-Tejada, H.V., Solorza-Feria, O.: Characterization and electrocatalytic properties of sonochemical synthesized PdAg nanoparticles. Mater. Chem. Phys. 134, 1013–1019 (2012) Qiu, H.J., Xu, H.T., Li, X., Wang, J.Q., Wang, Y.: Core–shell-structured nanoporous PtCu with high Cu content and enhanced catalytic performance, J. Mater. Chem. A 3, 7939 (2015) Sun, W., Li, Q., Gao, S., Shang, J.K.: Monometallic Pd/Fe3O4 catalyst for denitrification of water. Appl. Catal. B Environ. 125, 1–9 (2012) Dal Santo, V., Gallo, A., Naldoni, A., Guidotti, M., Psaro, R.: Bimetallic heterogeneous catalysts for hydrogen production. Catal. Today 197, 190–205 (2012) Akman, O., Kavas, H., Baykal, A., Toprak, M.S., Coruh, A., Aktas, B.: Magnetic metal nanoparticles coated polyacrylonitrile textiles as microwave absorber. J. Magn. Magn. Mat. 327, 151–158 (2013) Niemeyer, C.M.: Nanoparticles, proteins, and nucleic acids: biotechnology meets materials science. Angew. Chem. Int. Ed. Engl. 40(22), 4128–4158 (2001) Li, Q., Mahendra, S., Lyon, D.Y., Brunet, L., Liga, M.V., Li, D., Alvarez, P.J.J.: Antimicrobial nanomaterials for water disinfection and microbial control: potential applications and implications. Water Res. 42, 4591–4602 (2008) Zhang, Y., Gao, G., Qian, Q., Cui, D.: Chloroplasts-mediated biosynthesis of nanoscale Au-Ag alloy for 2-butanone assay based on electrochemical sensor. Nanoscale Res. Let. 7, 475 (2012) Ghodselahi, T., Arsalani, S., Neishaboorynejad, T.: Synthesis and biosensor application of Ag@Au bimetallic nanoparticles based on localized surface plasmon resonance. Appl. Surf. Sci. 301, 230–234 (2014) Sotiriou, G.A., Pratsinis, S.E.: Engineering nanosilver as an antibacterial, biosensor and bioimaging material. Curr. Opin. Chem. Eng. 1, 3–10 (2011) Leng, J., Wang, W., Lu, L., Bai, L., Qiu, X.: DNA-templated synthesis of PtAu bimetallic nanoparticle/graphene nanocomposites and their application in glucose biosensor, Nanoscale Res. Lett. 9, 99 (2014) Yang, J., Deng, S., Lei, J., Ju, H., Gunasekaran, S.: Electrochemical synthesis of reduced graphene sheet-AuPd alloy nanoparticles composites for enzymatic biosensing. Biosens. Bioelectron. 29, 159–166 (2011) Kirubha, E., Palanisamy, P.K.: Green synthesis, characterization of Au–Ag core–shell nanoparticles using gripe water and their applications in nonlinear optics and surface enhanced Raman studies. Adv. Nat. Sci. Nanosci. Nanotech. 5, 045006 (2014) Su, Y.H., Wang, W.: Surface plasmon resonance of Au–Cu bimetallic nanoparticles predicted by quasi-chemical model. Nanoscale Res. Lett. 8, 408 (2013) Sharma, A.K., Mohr, G.J.: On the performance of surface plasmon resonance based fibre optic sensor with different bimetallic nanoparticle alloy combinations. J. Phys. D Appl. Phys. 41, 055106 (2008) Nalawade, P., Mukherjee, P., Kapoor, S.: Triethylamine induced synthesis of silver and bimetallic (Ag/Au) nanoparticles in glycerol and their antibacterial study. J. Nanostruct. Chem. 4, 113 (2014) Nagaonkar, D., Rai, M.: Sequentially reduced biogenic silver-gold nanoparticles with enhanced antimicrobial potential over silver and gold monometallic nanoparticles. Adv. Mater. Lett. 6(4), 334–341 (2015) Szymanski, P., Fraczek, T., Markowicz, M., Mikiciuk-Olasik, E.: Development of copper based drugs, radiopharmaceuticals and medical materials. Biometals 25, 1089–1112 (2012) Kanhed, P., Birla, S., Gaikwad, S., Gade, A., Seabra, A.B., Rubilar, O., Duran, N., Rai, M.: In vitro antifungal efficacy of copper nanoparticles against selected crop pathogenic fungi. Materials Lett. 115, 13–17 (2014) Jayaramudua, T., Raghavendraa, G.M., Varaprasad, K., Sadikub, R., Raju, K.M.: Development of novel biodegradable Au nanocomposite hydrogels based on wheat: for inactivation of bacteria. Carbohydr. Polym. 92, 2193–2200 (2013) Salem, W., Leitner, D.R., Zingl, F.G., Schratter, G., Prassl, R., Goessler, W., Reidl, J., Schild, S.: Antibacterial activity of silver and zinc nanoparticles against Vibrio cholera and enterotoxic Escherichia coli. Int. J. Med. Microbiol. 305, 85–95 (2015) Martinez-Gutierrez, F., Olive, P.L., Banuelos, A., Orrantia, E., Nino, N., Sanchez, E.M., Ruiz, F., Bach, H., Av-Gay, Y.: Synthesis, characterization, and evaluation of antimicrobial and cytotoxic effect of silver and titanium nanoparticles. Nanomedicine 6, 681–688 (2010) Sri Sindhura, K., Prasad, T.N.V.K.V., Panner Selvam, P., Hussain, O.M.: Synthesis, characterization and evaluation of effect of phytogenic zinc nanoparticles on soil exo-enzymes. Appl. Nanosci. (2013). doi:10.1007/s13204-013-0263-4 Valodkar, M., Modi, S., Pal, A., Thakore, S.: Synthesis and antibacterial activity of Cu, Ag and Cu–Ag alloy nanoparticles: a green approach. Mat. Res. Bull. 46, 384–389 (2011) Bernard, V., ZobaI, O., Sopousek, J., Mornstein, V., AgCu bimetallic nanoparticles under effect of low intensity ultrasound: the cell viability study in vitro. J. Cancer Res. (2014). doi:10.1155/2014/971769 Li, Y., Lu, Y., Chou, K., Liu, F.: Synthesis and characterization of silver–copper colloidal ink and its performance against electrical migration. Mat. Res. Bull. 45, 1837–1843 (2010) Sharma, M.K., Buchner, R.D., Scharmach, W.J., Papavassiliou, V., Swihart, M.T.: Creating conductive copper–silver bimetallic nanostructured coatings using a high temperature reducing jet aerosol reactor. Aerosol Sci. Tech. 47, 858–866 (2013) Rahman, L., Shah, A., Lunsford, S.K., Han, C., Nadagouda, M.N., Sahle-Demessie, E., Qureshi, R., Khan, M.S., Kraatz, H., Dionysiou, D.D.: Monitoring of 2-butanone using a Ag–Cu bimetallic alloy nano scale electrochemical sensor. RSC Adv. 5, 44427–44434 (2015) Wanga, Y.H., Peng, S.J., Lu, J.D., Wanga, R.W., Mao, Y.L., Cheng, Y.G.: Optical properties of Cu and Ag nanoparticles synthesized in glass by ion implantation. Vacuum 83, 408–411 (2009) Piccinin, S., Zafeiratos, S., Stampfl, C., Hansen, T.W., Havecker, M., Teschner, D., Bukhtiyarov, V.I., Girgsdies, F., Knop-Gericke, A., Schlogl, R., Scheffler, M.: Alloy catalyst in a reactive environment: the example of Ag–Cu particles for ethylene epoxidation. PRL 104, 035503 (2010) Wang, H., Yi, C.Y., Tian, L., Wang, W., Fang, J., Zhao, J., Shen, W.: Ag–Cu bimetallic nanoparticles prepared by microemulsion method as catalyst for epoxidation of styrene. J. Nanomat. doi:10.1155/2012/453915 Zhang, Z., Ji, Y., Li, J., Zhong, Z., Su, F.: Synergistic effect in bimetallic copper–silver (Cu × Ag) nanoparticles enhances silicon conversion in Rochow reaction. RSC Adv. 5, 54364 (2015) Tolou, N.B., Fathi1, M., Monshi1, A., Mortazavi, V., Shirani, F.: Preparation and corrosion behavior evaluation of amalgam/titania nano composite. Dent. Res. J. 8, 5 (2011) Bansal, A., Sekhon, J.S., Verma, S.S.: Scattering efficiency and LSPR tunability of bimetallic Ag, Au, and Cu nanoparticles. Plasmonics (2013). doi:10.1007/s11468-013-9607-x Zhao, X.Y., Wanga, M.R., Cao, J., Song, X.G., Tang, D.Y., Feng, J.C.: Brazing TC4 alloy to Si3N4 ceramic using nano-Si3N4 reinforced AgCu composite filler. Mater. Des. 76, 40–46 (2015) Malviya, K.D., Srivastava, C., Chattopadhyay, K.: Phase formation and stability of alloy phases in free nanoparticles: some insights. RSC Adv. 5, 35541 (2015) Rahman, L., Qureshi, R., Yasinzai, M.M., Shah, A.: Synthesis and spectroscopic characterization of Ag–Cu alloy nanoparticles prepared in various ratios. C. R. Chimie 15, 533–538 (2012) Taner, M., Sayar, N., Yulug, I.G., Suzer, S.: Synthesis, characterization and antibacterial investigation of silver–copper nanoalloys. J. Mater. Chem. 21, 13150–13154 (2011) Bhagathsingh, W., Samson Nesaraj, A.: Low temperature synthesis and thermal properties of Ag–Cu alloy nanoparticles. Trans. Nonferrous Met. Soc. China 23, 128–133 (2013) Ghodselahi, T., Arsalani, S., Neishaboorynejad, T.: Synthesis and biosensor application of Ag@Au bimetallic nanoparticles based on localized surface plasmon resonance. Appl. Surf. Sci. 301, 230–234 (2014) Alqudami, A., Annapoorni, S., Shivaprasad, S.M.: Ag–Au alloy nanoparticles prepared by electro-exploding wire technique. J. Nanopart. Res. 10, 1027–1036 (2008) Liu, H., Sun, K., Zhao, J., Guo, R., Shen, M., Cao, X., Zhang, G., Shi, X.: Dendrimer-mediated synthesis and shape evolution of gold–silver alloy nanoparticles. Colloids Surf. A 405, 22–29 (2012) Valodkar, M., Modi, S., Pal, A., Thakore, S.: Synthesis and anti-bacterial activity of Cu, Ag and Cu–Ag alloy nanoparticles: a green approach. Mat. Res. Bull. 46, 384–389 (2011) Kiani, Zeinab, Abdi, Yaser, Arzi, Ezatollah: Low temperature formation of silver and silver-copper alloy nano-particles using plasma enhanced hydrogenation and their optical properties. World J. Nano Sci. Eng. 2, 142–147 (2012) Reetz. M.T., Helbig. W.J.: Size-selective synthesis of nanostructured transition metal clusters. J. Am. Chem. Soc. 116, 7401–7406 (1994)