Electrochemical and corrosion study of as-cast NixAly intermetallic alloys: Influence of alloy composition and electrolyte pH

Deevi, 1996, Nickel and iron aluminides: an overview on properties, processing, and applications, Intermetallics, 4, 357, 10.1016/0966-9795(95)00056-9 Grabke, 1999, Oxidation of NiAl and FeAl, Intermetallics, 7, 1153, 10.1016/S0966-9795(99)00037-0 Wen, 2017, Effect of phase composition and microstructure on the corrosion resistance of Ni-Al intermetallic compounds, J. Alloys Compd., 695, 2424, 10.1016/j.jallcom.2016.11.138 Osório, 2012, Assessment of electrochemical and mechanical behavior of hot-extruded powders and As-cast samples of Al-Ni alloys, Int. J. Electrochem. Sci., 7, 9946, 10.1016/S1452-3981(23)16250-X Ohmi, 2001, Centrifugal casting of Ni-Al intermetallics compounds produced by thermic-type combustion synthesis, J. Jpn. Inst. Met., 65, 458, 10.2320/jinstmet1952.65.5_458 Dong, 2009, Formation of porous Ni-Al intermetallics through pressureless reaction synthesis, J. Alloys Compd., 484, 907, 10.1016/j.jallcom.2009.05.079 Biswas, 2004, Comparison between the microstructural evolutions of two modes of SHS of NiAl: key to a common reaction mechanism, Acta Mater., 52, 257, 10.1016/j.actamat.2003.08.018 Ozdemir, 2009, A study on NiAl produced by pressure-assisted combustion synthesis, Vacuum, 84, 430, 10.1016/j.vacuum.2009.09.006 Liu, 1986, Nickel aluminides for structural use, JOM, 38, 19, 10.1007/BF03257837 Darolia, 1991, NiAl alloys for high-temperature structural applications, JOM, 43, 44, 10.1007/BF03220163 Chang, 2003, Cavitation erosion and corrosion behavior of Ni-Al intermetallic coatings, Wear, 255, 162, 10.1016/S0043-1648(03)00199-6 Porcayo-Calderon, 2015, Electrochemical behavior of NiAl and Ni 3 Al intermetallic coatings in 1.0 M NaOH solution, Int. J. Electrochem. Sci., 10, 6241, 10.1016/S1452-3981(23)06716-0 Li, 2016, Composition distribution and electrochemical behavior of an Ni2Al3 coating on Q235 steel, Metals (Basel), 6, 10.3390/met6030058 Adkins, 1948, The preparation of raney nickel catalysts and their use under conditions comparable with those for platinum and palladium catalysts, J. Am. Chem. Soc., 70, 695, 10.1021/ja01182a080 Wainwright, 1999, 3.2 skeletal metal catalysts, 28 Liu, 2001, Skeletal Ni catalyst prepared from a rapidly quenched Ni–Al alloy and its high selectivity in 2-ethylanthraquinone hydrogenation, J. Catal., 204, 512, 10.1006/jcat.2001.3405 Devred, 2009, Influence of phase composition and particle size of atomised Ni-Al alloy samples on the catalytic performance of Raney-type nickel catalysts, Appl. Catal. A: Gen., 356, 154, 10.1016/j.apcata.2008.12.039 Sulka, 2011, Electrochemical behavior of Ni3Al-based intermetallic alloys in NaOH, Intermetallics, 19, 974, 10.1016/j.intermet.2011.02.021 V. Veijola, P. Kinnari, P. Ala-Aho, M. Harkonen, Eraiden Raneykatalyyttien Aktiivisuus, Hiilettyminen Ja Regeneroituminen Metaanin Hoyryreformoinnissa. Activity, Coking and Regeneration of Various Raney Catalysts in Steam Reforming of Methane., Kem-Kem. 3 (1976) 173–178. Monnerat, 2001, Hydrogen production by catalytic cracking of methane over nickel gauze under periodic reactor operation, Chem. Eng. Sci., 56, 633, 10.1016/S0009-2509(00)00270-0 Ma, 2008, Catalytic stability of Ni3Al powder for methane steam reforming, Appl. Catal. B: Environ., 80, 15, 10.1016/j.apcatb.2007.10.034 Xu, 2004, Catalytic properties of Ni3Al intermetallics for methanol decomposition, Mater. Trans., 45, 3177, 10.2320/matertrans.45.3177 Chun, 2006, Catalytic properties of Ni3Al foils for methanol decomposition, Catal. Lett., 106, 71, 10.1007/s10562-005-9193-4 Jang, 2010, Catalytic activity of pre-activated Ni3Al foil catalysts for hydrogen production from methanol under steam addition, Catal. Lett., 134, 258, 10.1007/s10562-009-0256-9 Liang, 2011, The corrosion behavior of porous Ni3Al intermetallic materials in strong alkali solution, Intermetallics, 19, 1759, 10.1016/j.intermet.2011.06.016 Rybalka, 2011, Electrochemical behavior and the rate of general corrosion of NiAl intermetallic compound in the unbuffered sodium chloride solutions, Corros. Sci., 53, 630, 10.1016/j.corsci.2010.10.016 Lee, 2010, Selective dissolution of the γ phase in a binary Ni(γ)/Ni3Al(γ’) two-phase alloy, Corros. Sci., 52, 3820, 10.1016/j.corsci.2010.07.036 Osório, 2010, Electrochemical corrosion characterization of Al-Ni alloys in a dilute sodium chloride solution, Electrochim. Acta, 55, 4078, 10.1016/j.electacta.2010.02.029 Albiter, 2004, Corrosion performance of NiAl intermetallic with Mo, Ga and Fe in neutral and alkaline media, J. Appl. Electrochem., 34, 1141, 10.1007/s10800-004-3301-9 Lillard, 1998, Electrochemical passivation of ordered NiAl, J. Electrochem. Soc., 145, 2024, 10.1149/1.1838593 Bertocci, 1990, Passivity and passivity breakdown in nickel aluminide, Corros. Sci., 31, 471, 10.1016/0010-938X(90)90148-X BS EN755, 2016 ASTM, 2015, 1 Mongay, 1974, A Britton Robinson buffer of known ionic strength, Ann. Chim., 64, 409 Osório, 2013, EIS and potentiodynamic polarization studies on immiscible monotectic Al-In alloys, Electrochim. Acta, 102, 436, 10.1016/j.electacta.2013.04.047 Vanysek, 2000, Electrochemical series, 1 Pickering, 1983, Characteristic features of alloy polarization curves, Corros. Sci., 23, 1107, 10.1016/0010-938X(83)90092-6 McCue, 2016, Dealloying and dealloyed materials, Annu. Rev. Mater. Res., 46, 263, 10.1146/annurev-matsci-070115-031739 Pourbaix, 1974 Klein, 1981, Surface analysis of Raney nickel alloys, Anal. Chem., 53, 754, 10.1021/ac00229a003 De Gromoboy, 1966, The formation of nickel oxides during the passivation of nickel in relation to the potential/pH diagram, Electrochim. Acta, 11, 895, 10.1016/0013-4686(66)87066-4 Hummel, 1987, The passivation of nickel in aqueous solutions-I. The identification of insoluble corrosion products on nickel electrodes using optical and ESCA techniques, Corros. Sci., 27, 803, 10.1016/0010-938X(87)90038-2 Pourbaix, 1955, LindauProc. 7th Meet. CITCE1955, Proc. 7th Meet. CITCE, 193 ASTM International, 2008, G102 – standard practice for calculation of corrosion rates and related information from electrochemical measurements 1 rosion test specimens, ASTM Int. G102-89, 1 Zaid, 2008, Effects of pH and chloride concentration on pitting corrosion of AA6061 aluminum alloy, Corros. Sci., 50, 1841, 10.1016/j.corsci.2008.03.006 Osório, 2014, Corrosion performance based on the microstructural array of Al-based monotectic alloys in a NaCl solution, J. Mater. Eng. Perform., 23, 333, 10.1007/s11665-013-0741-6