Electric resistance measurement–based structural health monitoring with multifunctional carbon fibers: Predicting, sensing, and measuring overload

Vermes, 2021, Application of the Tsai's modulus and double-double concepts to the definition of a new affordable design approach for composite laminates, Compos. Struct., 259, 10.1016/j.compstruct.2020.113246 Geier, 2020, Analysis of characteristics of surface roughness of machined CFRP composites, Period. Polytech. - Mech. Eng., 64, 67, 10.3311/PPme.14436 Forintos, 2020, Reinforcing carbon fibers as sensors: the effect of temperature and humidity, Compos. Appl. Sci. Manuf., 131, 10.1016/j.compositesa.2020.105819 Schulte, 1989, Load and failure analyses of CFRP laminates by means of electrical resistivity measurements, Compos. Sci. Technol., 36, 63, 10.1016/0266-3538(89)90016-X Chung, 2001, Structural health monitoring by electrical resistance measurement, Smart Mater. Struct., 10, 624, 10.1088/0964-1726/10/4/305 Prasse, 2001, A comparative investigation of electrical resistance and acoustic emission during cyclic loading of CFRP laminates, Compos. Sci. Technol., 61, 831, 10.1016/S0266-3538(00)00179-2 Luan, 2018, Self-sensing of position-related loads in continuous carbon fibers-embedded 3D-printed polymer structures using electrical resistance measurement, Sensors, 18, 994, 10.3390/s18040994 Vavouliotis, 2011, On the fatigue life prediction of CFRP laminates using the electrical resistance change method, Compos. Sci. Technol., 71, 630, 10.1016/j.compscitech.2011.01.003 Chow, 2020, Smart polymer nanocomposites : a review, Express Polym. Lett., 14, 416, 10.3144/expresspolymlett.2020.35 Gallo, 2015, Electrical characterization and modeling of carbon nanotube and carbon fiber self-sensing composites for enhanced sensing of microcracks, Mater. Today Commun., 3, 17, 10.1016/j.mtcomm.2015.01.009 Wan, 2021, On-line tensile damage monitoring of WGF/epoxy T-joint by the embedded MWCNT@WGF sensor, Compos. Commun., 23, 10.1016/j.coco.2020.100541 Wang, 2021, Health monitoring of repaired composite structure using MXene sensor, Compos. Commun., 27, 10.1016/j.coco.2021.100850 Pissis, 2015, Strain and damage sensing in polymer composites and nanocomposites with conducting fillers, Procedia Eng., 114, 590, 10.1016/j.proeng.2015.08.109 Alipour, 2021, Effects of matrix viscosity on morphological and rheological properties and the electrical percolation threshold in graphene/epoxy nanocomposites, Express Polym. Lett., 15, 541, 10.3144/expresspolymlett.2021.46 Nakaramontri, 2020, Piezoresistive carbon-based composites for sensor applications: effects of polarity and non-rubber components on shape recovery, Express Polym. Lett., 14, 970, 10.3144/expresspolymlett.2020.79 Forintos, 2021, Multifunctional carbon fiber sensors: the effect of anisotropic electrical conductivity, IEEE Sensor. J., 21, 8960, 10.1109/JSEN.2021.3053125