Elastoplastic homogenization of particulate composites complying with the Mohr–Coulomb criterion and undergoing isotropic loading
Tóm tắt
This work aims at determining the overall response of a two-phase elastoplastic composite to isotropic loading. The composite under investigation consists of elastic particles embedded in an elastic perfectly plastic matrix governed by the Mohr–Coulomb yield criterion and a non-associated plastic flow rule. The composite sphere assemblage model is adopted, and closed-form estimates are derived for the effective elastoplastic properties of the composite either under tensile or compressive isotropic loading. In the case when elastic particles reduce to voids, the composite in question degenerates into a porous elastoplastic material. The results obtained in the present work are of interest, in particular, for soil mechanics.
Tài liệu tham khảo
Le Quang, H., He, Q.C.: Effective pressure-sensitive elastoplastic behavior of particle-reinforced composites and porous media under isotropic loading. Int. J. Plast. 24, 343–370 (2008)
Dvorak, G.: Micromechanics of Composite Materials. Springer, Netherlands (2012)
Hashin, Z.: The elastic moduli of heterogeneous materials. ASME J. Appl. Mech. 29, 143–150 (1962)
Hashin, Z., Shtrikman, S.: A variational approach to the theory of the effective magnetic permeability of multiphase materials. J. Appl. Phys. 33, 3125–3131 (1962)
Chen, W.F.: Limit Analysis and Soil Mechanics. Elsevier, New York (1975)
Van Tiel, J.: Convex Analysis: An Introduction Text. Wiley, New York (1984)
Chen, W.F., Han, D.J.: Plasticity for Structural Engineers. Springer, New York (1988)
Bousshine, L., Chaaba, A., De Saxce, G.: Softening in stress-strain curve for Drucker–Prager non-associated plasticity. Int. J. Plast. 17, 21–46 (2001)
Hjiaj, M., Fortin, J., de Sacre, G.: A complete stress update algorithm for the non-assiciated Drucker–Prager model including treatment of the apex. Int. J. Eng. Sci. 41, 1109–1143 (2003)
Cheng, L., Jia, Y., Oueslati, A., et al.: Plastic limit state of the hollow sphere model with non-associated Drucker–Prager material under isotropic loading. Comput. Mater. Sci. 62, 210–215 (2012)
He, Q.C., Vallée, C., Lerintiu, C.: Explicit expressions for the plastic normality-flow rule associated to the Tresca yield criterion. Z. Angew. Math. Phys. 56, 357–366 (2005)
Vallée, C., He, Q.C., Lerintiu, C.: Convex analysis of the eigenvalues of a 3D second-order symmetric tensor. J. Elast. 83, 191–204 (2006)
Chu, T.Y., Hashin, Z.: Plastic behavior of composites and porous media under isotropic stress. Int. J. Eng. Sci. 9, 971–994 (1971)
Yin, Z.Y., Chang, C.S., Hicher, P.Y., et al.: Micromechanical analysis of the behavior of stiff clay. Acta Mech. Sin. 27, 1013–1022 (2011)