Efficient temperature compensation strategies for guided wave structural health monitoring

Staszewski, 2003

K. Bohle, C.-P. Fritzen, Damage identification using a modal kinetic energy criterion and “output-only” modal data – application to the Z24-bridge, in: 2nd European Workshop on Structural Health Monitoring, 2004, pp. 185–194.

P. Kraemer, C.-P. Fritzen, Concept for structural damage identification of offshore wind energy plants, in: 6th International Workshop on Structural Health Monitoring, 2007, pp. 1881–1888.

Demma, 2003, The reflection of guided waves from notches in pipes: a guide for interpreting corrosion measurements, NDT&E International, 37, 167, 10.1016/j.ndteint.2003.09.004

Beard, 1997, Active damage detection in filament wound composite tubes using built-in sensors and actuators, Journal of Intelligent Material Systems and Structures, 8, 891, 10.1177/1045389X9700801009

Balageas, 2006

Giurgiutiu, 2008

K. Worden, C.R. Farrar, G. Manson, G. Park, Fundamental axioms of structural health monitoring, in: 5th International Workshop on Structural Health Monitoring, 2005, pp. 26–41.

Sohn, 2006, Effects of environmental and operational variability on structural health monitoring, Philosophical Transactions of the Royal Society A, 365, 539, 10.1098/rsta.2006.1935

Tua, 2004, Detection of cracks in plates using piezo-actuated Lamb waves, Journal of Smart Materials and Structures, 13, 643, 10.1088/0964-1726/13/4/002

Koh, 2002, Effects of local stiffness changes and delamination on Lamb wave transmission using surface-mounted piezoelectric transducers, Composite Structures, 57, 437, 10.1016/S0263-8223(02)00111-3

Yu, 2008, A multi-mode sensing system for corrosion detection using piezoelectric wafer active sensors, Proceedings of the SPIE, 10.1117/12.776670

Konstantinidis, 2007, An investigation into the temperature stability of a guided wave structural health monitoring system using permanently attached sensors, IEEE Sensors Journal, 7, 905, 10.1109/JSEN.2007.894908

Michaels, 2009, Analysis of global ultrasonic sensor data from a full scale wing test, vol. 28, 950

Lu, 2005, A methodology for structural health monitoring with diffuse ultrasonic waves in the presence of temperature variations, Ultrasonics, 43, 717, 10.1016/j.ultras.2005.05.001

Konstantinidis, 2006, The temperature stability of guided wave structural health monitoring systems, Journal of Smart Materials and Structures, 15, 967, 10.1088/0964-1726/15/4/010

Wilcox, 2007, Sensitivity limitations for guided wave structural health monitoring, Proceedings of the SPIE, 6532, 6532A

Wilcox, 2008, A comparison of temperature compensation methods for guided wave structural health monitoring, Review of Progress in Quantitative Nondestructive Evaluation, 1453, 1460

A.J. Croxford, P.D. Wilcox, B.W. Drinkwater, G. Konstantinidis, Temperature sensitivity limitations for guided wave structural health monitoring, in: 6th International Workshop on Structural Health Monitoring, 2007.

Croxford, 2007, Proceedings of the SPIE, 65321T, 10.1117/12.719435

Croxford, 2008, Quantification of environmental compensation strategies for guided wave structural health monitoring, Proceedings of the SPIE, 11

T. Clarke, P. Cawley, Monitoring of complex structures using guided waves, in: 4th European Workshop on Structural Health Monitoring, 2008, pp. 672–679.

Raghavan, 2007, Effects of elevated temperature on guided-wave structural health monitoring, Journal of Intelligent Material Systems and Structures, 1, 16

Croxford, 2007, Strategies for guided-wave structural health monitoring, Proceedings of the Royal Society, 463, 2961, 10.1098/rspa.2007.0048

T. Clarke, F. Simonetti, P. Cawley, Guided wave health monitoring of complex structures by sparse array systems: influence of temperature changes on performance, Journal of Sound and Vibration, 2009, doi:10.1016/j.jsv.2009.01.052.

Scholey, 2009, A practical technique for quantifying the performance of acoustic emission systems on platelike structures, Ultrasonics, 49, 538, 10.1016/j.ultras.2009.02.001