Efficient recovery of extra-heavy oil using a naturally abundant green solvent: Toward a more sustainable oil-solid-water separation

Sustainable Materials and Technologies - Tập 25 - Trang e00185 - 2020
Feng Lin1
1Natural Resources Canada, CanmetENERGY, Devon, Alberta T9G 1A8, Canada

Tài liệu tham khảo

Fidalgo, 2016, Eco-friendly extraction of pectin and essential oils from orange and lemon peels, ACS Sustain. Chem. Eng., 4, 2243, 10.1021/acssuschemeng.5b01716 Dávila, 2019, Extraction of phenolic compounds from spent blackberry pulp by enhanced-fluidity liquid extraction, AICHE J., 65, 10.1002/aic.16609 Hanmoungjai, 2000, Extraction of rice bran oil using aqueous media, J. Chem. Technol. Biotechnol., 75, 348, 10.1002/(SICI)1097-4660(200005)75:5<348::AID-JCTB233>3.0.CO;2-P Kolev, 2003, Spontaneous detachment of oil drops from solid substrates: governing factors, J. Colloid Interface Sci., 257, 357, 10.1016/S0021-9797(02)00052-8 Lin, 2014, Dewetting dynamics of a solid microsphere by emulsion drops, J. Phys. Chem. C, 118, 13552, 10.1021/jp412662x Roumpea, 2017, Experimental investigations of non-Newtonian/ Newtonian liquid-liquid flows in microchannels, AICHE J., 63, 3599, 10.1002/aic.15704 Kim, 2012, Disruptive microfluidics: from life sciences to world health to energy, Disrupt. Sci. Technol., 1, 41, 10.1089/dst.2012.0003 Oribayo, 2019, Hydrophobic surface modification of FMSS and its application as effective sorbents for oil spill clean-ups and recovery, AICHE J., 63, 4090, 10.1002/aic.15767 Wang, 2019, Efficient remediation of crude oil-contaminated soil using a solvent/surfactant system, RSC Adv., 9, 2402, 10.1039/C8RA09964B De Gisia, 2016, Characteristics and adsorption capacities of low-cost sorbents for wastewater treatment: a review, Sustain. Mat. Technol., 9, 10 Vashisth, 2011, Column flotation deinking: state-of-the-art and opportunitie, Resour. Conserv. Recycl., 55, 1154, 10.1016/j.resconrec.2011.06.013 Kocherginsky, 2003, Demulsification of water-in-oil emulsions via filtration through a hydrophilic polymer membrane, J. Membr. Sci., 220, 117, 10.1016/S0376-7388(03)00223-0 Wakizaka, 2016, Utilization of beer lees waste for the production of activated carbons: the influence of protein fractions on the activation reaction and surface properties, Sustain. Mat. Technol., 8, 1 Lin, 2014, Random charge variations at the bitumen-water interface: characterization by autocorrelation, Colloids Surf. A: Physicochem. Eng. Asp., 451, 144, 10.1016/j.colsurfa.2014.03.045 He, 2015, Interfacial sciences in unconventional petroleum production: from fundamentals to applications, Chem. Soc. Rev., 44, 5446, 10.1039/C5CS00102A Lin, 2014, A small point regarding DLVO coagulation conditions, J. Colloid Interface Sci., 430, 113, 10.1016/j.jcis.2014.05.014 Yang, 2015, Extraction of oil from oil sands using thermoresponsive polymeric surfactants, ACS Appl. Mater. Interfaces, 7, 5879, 10.1021/am509231k Lin, 2016, Role of ethyl cellulose in bitumen extraction from oil sands ores using an aqueous nonaqueous hybrid process, Energy Fuel, 30, 121, 10.1021/acs.energyfuels.5b01960 He, 2014, Enhancing bitumen liberation by controlling the interfacial tension and viscosity ratio through solvent addition, Energy Fuel, 28, 7403, 10.1021/ef501963e Lin, 2019, Pilot evaluation of aqueous nonaqueous hybrid bitumen extraction process for mineable oil sands, Miner. Eng., 131, 241, 10.1016/j.mineng.2018.11.019 He, 2015, Effect of solvent addition on bitumen-air bubble attachment in process water, Chem. Eng. Sci., 137, 31, 10.1016/j.ces.2015.05.062 Lin, 2018, Determination and understanding of solvent losses to tailings from a laboratory hybrid bitumen extraction process, Energy Fuel, 32, 9202, 10.1021/acs.energyfuels.8b01978 Primkulov, 2016, Microscale liquid-liquid displacement dynamics: molecular kinetic or hydrodynamic control, Colloids Surf. A: Physicochem. Eng. Asp., 497, 336, 10.1016/j.colsurfa.2016.02.013 Lin, 2019, Impact of a novel bitumen extraction process on mined oil sands tailings behavior, AICHE J., 65, 250, 10.1002/aic.16424 Eckert, 1996, Predication of sedimentation and consolidation of fine tails, AICHE J., 42, 960, 10.1002/aic.690420409 Lin, 2019, Role of n-decane in an alternative bitumen recovery method, Curr. Anal. Chem. J., 2, 1 Sui, 2016, Recovery of heavy hydrocarbons from Indonesian carbonate asphalt rocks. Part 1: solvent extraction, particle sedimentation, and solvent recycling, Energy Fuel, 30, 9242, 10.1021/acs.energyfuels.6b01963 Qing, 2012, Combustion characteristics of Indonesian oil sands, Fuel Process. Technol., 99, 110, 10.1016/j.fuproc.2012.02.006 Lin, 2017, Recent advances in nonaqueous extraction of bitumen from mineable oil sands: a review, Org. Process. Res. Dev., 21, 492, 10.1021/acs.oprd.6b00357 Hooshiar, 2012, Clay minerals in nonaqueous extraction of bitumen from Alberta oil sands part 1. Nonaqueous extraction procedure, Fuel Process. Technol., 94, 80, 10.1016/j.fuproc.2011.10.008 Hooshiar, 2012, Clay minerals in nonaqueous extraction of bitumen from Alberta oil sands part 2. Characterization of clay minerals, Fuel Process. Technol., 96, 183, 10.1016/j.fuproc.2011.10.010 R.L. Blackbourn, R.A. Bott, S.P. Giles, B.D. Komishke, Y. Long, I.H.J. Ploemen, B.C. InTveen, Closed Loop Solvent Extraction Process for Oil Sands, US Patent 20140216985, 2014. Nikakhtari, 2013, Solvent screening for non-aqueous extraction of Alberta oil sands, Can. J. Chem. Eng., 91, 1153, 10.1002/cjce.21751 Nikakhtari, 2014, Migration of fine solids into product bitumen from solvent extraction of Alberta oilsands, Energy Fuel, 28, 2925, 10.1021/ef500021y Pal, 2015, Performance of solvent mixtures for non-aqueous extraction of Alberta oil sands, Energy Fuel, 29, 2261, 10.1021/ef502882c Li, 2012, Operational parameters, evaluation methods, and fundamental mechanisms: aspects of nonaqueous extraction of bitumen from oil sands, Energy Fuel, 26, 3553, 10.1021/ef300337q Wu, 2012, Process for solvent extraction of bitumen from oil sand, Energy Fuel, 26, 1002, 10.1021/ef201457m Wang, 2014, Solvent extraction of bitumen from oil sands, Energy Fuel, 28, 2297, 10.1021/ef402101s Song, 2018, Computer-aided design of ionic liquids as solvents for extractive desulfurization, AICHE J., 64, 1013, 10.1002/aic.15994 Qin, 2017, Association extraction for vitamin E recovery from deodorizer distillate by in situ formation of deep eutectic solvent, AICHE J., 63, 2212, 10.1002/aic.15606 Yin, 2015, Deep desulfurization of fuels based on an oxidation/extraction process with acidic deep eutectic solvents, Green Chem., 17, 4552, 10.1039/C5GC00709G Plechkova, 2008, Applications of ionic liquids in the chemical industry, Chem. Soc. Rev., 37, 123, 10.1039/B006677J Li, 2018, A hybrid process for oil-solid separation by a novel multifunctional switchable solvent, Fuel, 221, 303, 10.1016/j.fuel.2018.02.081 Painter, 2010, Recovery of bitumen from oil or tar sands using ionic liquids, Energy Fuel, 24, 1094, 10.1021/ef9009586 Painter, 2010, Recovery of bitumen from Utah tar sands using ionic liquids, Energy Fuel, 24, 5081, 10.1021/ef100765u Pulati, 2015, Extraction of bitumen from oil sands using deep eutectic ionic liquid analogues, Energy Fuel, 29, 4927, 10.1021/acs.energyfuels.5b01174 Jessop, 2011, Tertiary amine solvents having switchable hydrophilicity, Green Chem., 13, 619, 10.1039/c0gc00806k Holland, 2012, Separation of bitumen from oil sands using a switchable hydrophilicity solvent, Can. J. Chem., 90, 805, 10.1139/v2012-061 Pham, 2010, Environmental fate and toxicity of ionic liquids: a review, Water Res., 44, 352, 10.1016/j.watres.2009.09.030 Anastas, 1998 Clark, 2015, Opportunities for biobased solvents created as petrochemical and fuel products transition towards renewable resources, Int. J. Mol. Sci., 16, 17101, 10.3390/ijms160817101 Byrne, 2016, Tools and techniques for solvent selection: green solvent selection guides, Sustain. Chem. Process, 4, 1, 10.1186/s40508-016-0051-z Tanzi, 2012, Terpenes as green solvents for extraction of oil from microalgae, Molecules, 17, 8196, 10.3390/molecules17078196 Gershenzon, 2007, The function of terpene natural products in the natural world, Nat. Chem. Biol., 3, 408, 10.1038/nchembio.2007.5 Carroll, 2016, Microbial production of scent and flavor compounds, Curr. Opin. Biotechnol., 37, 8, 10.1016/j.copbio.2015.09.003 Leavell, 2016, Developing fermentative terpenoid production for commercial usage, Curr. Opin. Biotechnol., 37, 114, 10.1016/j.copbio.2015.10.007 Oldfield, 2012, Terpene biosynthesis: modularity rules, Angew. Chem. Int. Ed., 51, 1124, 10.1002/anie.201103110 Behr, 2009, Myrcene as a natural base chemical in sustainable chemistry: a critical review, Chem. Sus. Chem., 2, 1072, 10.1002/cssc.200900186 Stamm, 2019, Chemo-enzymatic pathways toward pinene-based renewable materials, Green Chem., 21, 2720, 10.1039/C9GC00718K Soh, 2016, Green solvents in biomass processing, ACS Sustain. Chem. Eng., 4, 5821, 10.1021/acssuschemeng.6b01635 Kumar, 2017, Green solvents and technologies for oil extraction from oilseeds, Chem. Central J., 11, 1, 10.1186/s13065-017-0238-8 Breitmaier, 2006 Bayala, 2014, Anticancer activity of essential oils and their chemical components: a review, Am. J. Cancer Res., 4, 591 Lin, 2019, High value-added application of sustainable natural forest product α-Pinene: synthesis of myrtenal oxime esters as potential KARI inhibitors, ACS Sustain. Chem. Eng., 7, 7862, 10.1021/acssuschemeng.9b00254 Peralta-Yahya, 2012, Microbial engineering for the production of advanced biofuels, Nature, 488, 320, 10.1038/nature11478 Sahu, 2017, Synthesis and characterization of a terpene-based sustainable polymer: poly-alloocimene, ACS Sustain. Chem. Eng., 5, 7659, 10.1021/acssuschemeng.7b00990 Sarkar, 2016, Terpene based sustainable elastomer for low rolling resistance and improved wet grip application: synthesis, characterization and properties of poly(styrene-co-myrcene), ACS Sustain. Chem. Eng., 4, 5462, 10.1021/acssuschemeng.6b01038 Bolton, 2014, Sustainable thermoplastic elastomers from terpene-derived monomers, ACS Macro Lett., 3, 717, 10.1021/mz500339h Hauenstein, 2016, Bio-based polycarbonate from limonene oxide and CO2 with high molecular weight, excellent thermal resistance, hardness and transparency, Green Chem., 18, 760, 10.1039/C5GC01694K Grazhdannikov, 2018, Selecting a green strategy on extraction of birch bark and isolation of pure betulin using monoterpenes, ACS Sustain. Chem. Eng., 6, 6281, 10.1021/acssuschemeng.8b00086 Akeb, 2018, Polymerization of β-pinene by using natural montmorillonite clay as a green catalyst, Green Mater., 6, 1 Prat, 2016, CHEM21 selection guide of classical and less classical solvents, Green Chem., 18, 288, 10.1039/C5GC01008J Subramanian, 1996, Compositional analysis of bitumen and bitumen-rived products, Chromatogr. Sci., 34, 20, 10.1093/chromsci/34.1.20 Strausz, 2010, Chemical composition of Athabasca bitumen: the saturate fraction, Energy Fuel, 24, 5053, 10.1021/ef100702j Strausz, 2011, Chemical composition of Athabasca bitumen: the distillable aromatic fraction, Energy Fuel, 25, 4552, 10.1021/ef200833e Redelius, 2004, Bitumen solubility model using Hansen solubility parameter, Energy Fuel, 18, 1087, 10.1021/ef0400058 Acevedo, 2010, Investigation of physical chemistry properties of asphaltenes using solubility parameters of asphaltenes and their fractions A1 and A2, Energy Fuel, 24, 5921, 10.1021/ef1005786 Sato, 2014, Comparison of Hansen solubility parameter of asphaltenes extracted from bitumen produced in different geographical regions, Energy Fuel, 28, 891, 10.1021/ef402065j Long, 2002, Stability and settling characteristics of solvent-diluted bitumen emulsions, Fuel, 81, 1945, 10.1016/S0016-2361(02)00132-1 Lin, 2020, Impact of a hybrid bitumen extraction process on the destabilization of resulting bitumen froth emulsion diluted with heptane, Miner. Eng., 145, 10.1016/j.mineng.2019.106069 Noorjahan, 2014, Study of cyclohexane diffusion in Athabasca asphaltenes, Energy Fuel, 28, 1004, 10.1021/ef402312d Osacky, 2015, Influence of nonswelling clay minerals (illite, kaolinite, and chlorite) on nonaqueous solvent extraction of bitumen, Energy Fuel, 29, 4150, 10.1021/acs.energyfuels.5b00269 Tan, 2016, Sorption equilibrium and kinetics for cyclohexane, toluene, and water on Athabasca oil sands solids, Can. J. Chem. Eng., 94, 220, 10.1002/cjce.22389