Efficient ablation by ultra-short pulse lasers

Phillips, 2015, Ultrafast laser processing of materials : a review, Adv Opt Photonics, 7, 684, 10.1364/AOP.7.000684 Mishra, 2015, Laser Beam MicroMachining (LBMM) - A review, Opt Lasers Eng, 73, 89, 10.1016/j.optlaseng.2015.03.017 Tomkus, 2018, High-density gas capillary nozzles manufactured by hybrid 3D laser machining technique from fused silica, Opt Express, 26, 27965, 10.1364/OE.26.027965 Dudutis, 2019, Glass dicing with elliptical Bessel beam, Opt Laser Technol, 111, 331, 10.1016/j.optlastec.2018.10.007 Dudutis, 2020, Laser-fabricated axicons challenging the conventional optics in glass processing applications, Opt Express, 28, 5715, 10.1364/OE.377108 Gedvilas, 2005, Investigation of UV picosecond laser ablation of polymers, Proc SPIE, 6157, 61570T., 10.1117/12.661141 Kabouraki, 2013, Redox Multiphoton Polymerization for 3D Nanofabrication, Nano Lett, 13, 3831, 10.1021/nl401853k Merkininkaitė, 2019, Polymers for Regenerative Medicine Structures Made via Multiphoton 3D Lithography, Int J Polym Sci, 2019, 3403548, 10.1155/2019/3403548 Žemaitis, 2019, High-efficiency laser fabrication of drag reducing riblet surfaces on pre-heated Teflon, Mater Res Express, 6, 065309, 10.1088/2053-1591/ab0b12 Gedvilas, 2015, Flexible periodical micro- and nano-structuring of a stainless steel surface using dual-wavelength double-pulse picosecond laser irradiation, RSC Adv, 5, 75075, 10.1039/C5RA14210E Gečys, 2015, Ripple formation by femtosecond laser pulses for enhanced absorptance of stainless steel, J Laser Micro Nanoeng, 10, 129, 10.2961/jlmn.2015.02.0004 Gaidys, 2019, Efficient picosecond laser ablation of copper cylinders, Appl Surf Sci, 483, 962, 10.1016/j.apsusc.2019.04.002 Markauskas, 2015, Validation of monolithic interconnection conductivity in laser scribed CIGS thin-film solar cells, Sol Energy, 120, 35, 10.1016/j.solener.2015.06.042 Gečys, 2016, Variation of P2 series interconnects electrical conductivity in the CIGS solar cells by picosecond laser-induced modification, Sol Energy, 132, 493, 10.1016/j.solener.2016.03.027 Indrišiūnas, 2019, Laser-processed diffractive lenses for the frequency range of 4.7  THz, Opt Lett, 44, 1210, 10.1364/OL.44.001210 Gailevičius, 2019, Nanoscale 3D laser additive manufacturing of highly resilient glass ceramics, Proc SPIE, 11168, 111680F Chichkov, 1996, Femtosecond, picosecond and nanosecond laser ablation of solids, Appl Phys A, 63, 109, 10.1007/BF01567637 Furmanski, 2007, Deterministic processing of alumina with ultrashort laser pulses, J Appl Phys, 102, 073112, 10.1063/1.2794376 Račiukaitis, 2009, Use of High Repetition Rate and High Power Lasers in Microfabrication: How to Keep the Efficiency High?, J Laser Micro Nanoeng, 4, 186, 10.2961/jlmn.2009.03.0008 Žemaitis, 2019, Rapid high-quality 3D micro-machining by optimised efficient ultrashort laser ablation, Opt Lasers Eng, 114, 83, 10.1016/j.optlaseng.2018.11.001 Žemaitis, 2018, Advanced laser scanning for highly- efficient ablation and ultrafast surface structuring : experiment and model, Sci Rep, 8, 17376, 10.1038/s41598-018-35604-z Kerse, 2016, Ablation-cooled material removal with ultrafast bursts of pulses, Nature, 537, 84, 10.1038/nature18619 Žemaitis, 2019, Highly-efficient laser ablation of copper by bursts of ultrashort tuneable (fs-ps) pulses, Sci Rep, 9, 12280, 10.1038/s41598-019-48779-w Liu, 1982, Simple technique for measurements of pulsed Gaussian-beam spot sizes, Opt Lett, 7, 196, 10.1364/OL.7.000196 Bauer, 2015, Heat accumulation in ultra-short pulsed scanning laser ablation of metals, Opt Express, 23, 1035, 10.1364/OE.23.001035 Raciukaitis, 2008, Accumulation effects in laser ablation of metals with high-repetition-rate lasers, Proc SPIE, 7005, 70052L, 10.1117/12.782937 Kramer, 2017, Increasing the Specific Removal Rate for Ultra Short Pulsed Laser-Micromachining by Using Pulse Bursts, J Laser Micro Nanoeng, 12, 107, 10.2961/jlmn.2017.02.0011 Wu, 2014, Microscopic mechanisms of laser spallation and ablation of metal targets from large-scale molecular dynamics simulations, Appl Phys A Mater Sci Process, 114, 11, 10.1007/s00339-013-8086-4 Förster, 2018, Shielding effects and re-deposition of material during processing of metals with bursts of ultra-short laser pulses, Appl Surf Sci, 440, 926, 10.1016/j.apsusc.2018.01.297 Jäggi, 2018, Residual heat during laser ablation of metals with bursts of ultra-short pulses, Adv Opt Technol, 7, 175, 10.1515/aot-2018-0003 Neuenschwander, 2019, Influence of the burst mode onto the specific removal rate for metals and semiconductors, J Laser Appl, 31, 22203, 10.2351/1.5096083