Effects of the LiPO2F2 additive on unwanted lithium plating in lithium-ion cells

Electrochimica Acta - Tập 263 - Trang 237-248 - 2018
Q.Q. Liu1, Lin Ma2, C.Y. Du3, J.R. Dahn1,2
1Dept. of Physics and Atmospheric Science, Dalhousie University, Halifax, N.S. B3H4R2, Canada
2Dept. of Chemistry, Dalhousie University, Halifax, N.S. B3H4R2, Canada
3MIIT Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001, China

Tài liệu tham khảo

Vetter, 2005, Ageing mechanisms in lithium-ion batteries, J. Power Sources, 147, 269, 10.1016/j.jpowsour.2005.01.006 Li, 2014, A review of lithium deposition in lithium-ion and lithium metal secondary batteries, J. Power Sources, 254, 168, 10.1016/j.jpowsour.2013.12.099 Liu, 2016, Understanding undesirable anode lithium plating issues in lithium-ion batteries, RSC Adv., 6, 88683, 10.1039/C6RA19482F Zinth, 2014, Lithium plating in lithium-ion batteries at sub-ambient temperatures investigated by in situ neutron diffraction, J. Power Sources, 271, 152, 10.1016/j.jpowsour.2014.07.168 Gallagher, 2016, Optimizing areal capacities through understanding the limitations of lithium-ion electrodes, J. Electrochem. Soc., 163, A138, 10.1149/2.0321602jes Fan, 2006, Studies on charging lithium-ion cells at low temperatures, J. Electrochem. Soc., 153, A1081, 10.1149/1.2190029 Buqa, 2005, High rate capability of graphite negative electrodes for lithium-ion batteries, J. Electrochem. Soc., 152, A474, 10.1149/1.1851055 Jones, 2017, The effect of electrolyte composition on lithium plating during low temperature charging of Li-Ion cells, ECS Trans., 75, 1, 10.1149/07521.0001ecst Liu, 2017, Effects of electrolyte additives and solvents on unwanted lithium plating in lithium-ion cells, J. Electrochem. Soc., 164, A1173, 10.1149/2.1081706jes Yang, 2017, Improving the cyclability performance of lithium-ion batteries by introducing lithium difluorophosphate (LiPO2F2) additive, RSC Adv., 7, 26052, 10.1039/C7RA03926C Yang, 2016, Lithium difluorophosphate as an additive to improve the low temperature performance of LiNi0.5Co0.2Mn0.3O2/graphite cells, Electrochim. Acta, 221, 107, 10.1016/j.electacta.2016.10.037 Kim, 2015, A combination of lithium difluorophosphate and vinylene carbonate as reducible additives to improve cycling performance of graphite electrodes at high rates, Electrochem. Commun., 61, 121, 10.1016/j.elecom.2015.10.013 Sano, 2009, Decreasing the initial irreversible capacity loss by addition of cyclic sulfate as electrolyte additives, J. Power Sources, 192, 714, 10.1016/j.jpowsour.2009.02.075 Li, 2014, Ethylene sulfate as film formation additive to improve the compatibility of graphite electrode for lithium-ion battery, Ionics, 20, 795, 10.1007/s11581-013-1036-5 Ding, 2016, Improved compatibility of graphite anode for lithium ion battery using sulfuric esters, Electrochim. Acta, 196, 622, 10.1016/j.electacta.2016.02.205 McMillan, 1999, Fluoroethylene carbonate electrolyte and its use in lithium ion batteries with graphite anodes, J. Power Sources, 81, 20, 10.1016/S0378-7753(98)00201-8 Liao, 2012, Effects of fluoroethylene carbonate on low temperature performance of mesocarbon microbeads anode, Electrochim. Acta, 74, 260, 10.1016/j.electacta.2012.04.085 Sasaki, 2005, Suppression of an alkyl dicarbonate formation in Li-ion cells, J. Electrochem. Soc., 152, A2046, 10.1149/1.2034517 Aurbach, 2002, On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries, Electrochim. Acta, 47, 1423, 10.1016/S0013-4686(01)00858-1 Li, 2017, Impact of electrolyte additive content on the lifetime of LiNi0.5Mn0.3Co0.2O2/artificial and natural graphite cells, J. Electrochem. Soc., 164, A2756, 10.1149/2.1731712jes Nelson, 2015, Studies of the effect of high voltage on the impedance and cycling performance of Li [Ni0. 4Mn0.4Co0.2]O2/Graphite lithium-ion pouch cells, J. Electrochem. Soc., 162, A1046, 10.1149/2.0831506jes Gyenes, 2015, Understanding anomalous behavior in coulombic efficiency measurements on Li-ion batteries, J. Electrochem. Soc., 162, A278, 10.1149/2.0191503jes Burns, 2013, Studies of the effect of varying vinylene carbonate (VC) content in lithium ion cells on cycling performance and cell impedance, J. Electrochem. Soc., 160, A1668, 10.1149/2.031310jes Petibon, 2013, Study of electrolyte additives using electrochemical impedance spectroscopy on symmetric cells, J. Electrochem. Soc., 160, A117, 10.1149/2.005302jes Chen, 2001, Symmetric cell approach and impedance spectroscopy of high power lithium-ion batteries, J. Power Sources, 96, 321, 10.1016/S0378-7753(00)00666-2 Lu, 2002, Synthesis, structure, and electrochemical behavior of Li[NixLi1/3− 2x/3Mn2/3− x/3]O2, J. Electrochem. Soc., 149, A778, 10.1149/1.1471541 Etacheri, 2011, Challenges in the development of advanced Li-ion batteries: a review, Energy Environ. Sci., 4, 3243, 10.1039/c1ee01598b Wang, 2014, Degradation of lithium ion batteries employing graphite negatives and nickel–cobalt–manganese oxide+ spinel manganese oxide positives: Part 1, aging mechanisms and life estimation, J. Power Sources, 269, 937, 10.1016/j.jpowsour.2014.07.030 Gaberscek, 2008, The importance of interphase contacts in Li ion electrodes: the meaning of the high-frequency impedance arc, Electrochem. Solid State Lett., 11, A170, 10.1149/1.2964220 Kim, 2014, Effects of succinonitrile (SN) as an electrolyte additive on the impedance of LiCoO2/graphite pouch cells during cycling, J. Electrochem. Soc., 161, A506, 10.1149/2.014404jes Ji, 2013, Li-ion cell operation at low temperatures, J. Electrochem. Soc., 160, A636, 10.1149/2.047304jes