Effects of test orientation on fracture and fatigue crack growth behavior of third generation as-cast Ti–48Al–2Nb–2Cr

Bewlay, 2013, The science, technology, and implementation of TiAl alloys in commercial aircraft engines.pdf, vol. 1516, 49 Lasalmonie, 2006, Intermetallics: why is it so difficult to introduce them in gas turbine engines?, Intermetallics, 14, 1123, 10.1016/j.intermet.2006.01.064 Appel, 2000, Recent progress in the development of gamma titanium aluminide alloys, Adv Eng Mater, 2, 699, 10.1002/1527-2648(200011)2:11<699::AID-ADEM699>3.0.CO;2-J Kim, 1994, Ordered intermetallic alloys, part III: gamma titanium aluminides, JOM, 46, 30, 10.1007/BF03220745 Kim, 1991, Progress in the understanding of gamma titanium aluminides, JOM, 43, 40, 10.1007/BF03221103 Beddoes, 2001, Relationship between tensile and primary creep properties of near γ-TiAl intermetallics, Intermet Alloy Sci Technol Appl, 9, 915 Worth, 1995, Creep deformation in near-γ TiAl: part 1. The influence of microstructure on creep deformation in Ti–49Al–1V, Metall Mater Trans A, 26, 2947, 10.1007/BF02669651 Maruyama, 1997, Effects of lamellar spacing, volume fraction and grain size on creep strength of fully lamellar TiAl alloys, Mater Sci Eng A, 239–240, 419, 10.1016/S0921-5093(97)00612-6 Appel, 2011 Chan, 1992, Influence of microstructure on crack-tip micromechanics and fracture behaviors of a two-phase TiAl alloy, Metall Trans A, 23, 1663, 10.1007/BF02804362 Chan, 1993, Toughening mechanisms in titanium aluminides, Metall Trans A, 24, 569, 10.1007/BF02656627 Chan, 1991, Micromechanics of shear ligament toughening, Metall Trans A, 22, 2021, 10.1007/BF02669869 Mercer, 1997, Fatigue crack growth in cast gamma titanium aluminides, Acta Mater, 45, 4385, 10.1016/S1359-6454(97)00060-8 Chan, 1995, Effects of lamellae spacing and colony size on the fracture resistance of a fully-lamellar TiAl alloy, Acta Metall Mater, 43, 439, 10.1016/0956-7151(94)00278-P Chan, 1997, Fatigue and fracture behavior of a fine-grained lamellar TiAl alloy, Metall Mater Trans A, 28, 79, 10.1007/s11661-997-0084-8 Miller, 1982, The short crack problem, Fatigue Fract Eng Mater Struct, 5, 223, 10.1111/j.1460-2695.1982.tb01250.x Lankford, 1985, The influence of microstructure on the growth of small fatigue cracks, Fatigue Fract Eng Mater Struct, 8, 161, 10.1111/j.1460-2695.1985.tb01201.x Kim, 1989, Intermetallic alloys based on gamma titanium aluminide, JOM, 41, 24, 10.1007/BF03220267 Mitao, 1991, Effects of microstructure on the mechanical properties and fracture of 7-base titanium aluminides, Mater Sci Eng A, 143, 51, 10.1016/0921-5093(91)90725-3 Yang, 2014, Microstructural characterisation of fatigue crack growth fracture surfaces of lamellar Ti45Al2Mn2Nb1B, Intermetallics, 45, 89, 10.1016/j.intermet.2013.10.011 Thomas, 2005, Cast and PM processing development in gamma aluminides, Intermetallics, 13, 944, 10.1016/j.intermet.2004.12.010 Gloanec, 2003, Fatigue crack growth behaviour of a gamma-titanium-aluminide alloy prepared by casting and powder metallurgy, Scr. Mater, 49, 825, 10.1016/S1359-6462(03)00482-2 Mercer, 2000, An investigation of fatigue crack growth in a cast lamellar Ti–48Al–2Cr–2Nb alloy, Mater Sci Eng A, 284, 235, 10.1016/S0921-5093(00)00702-4 Zhu, 2000, Effect of stress ratio on fatigue crack growth in TiAl intermetallics at room and elevated temperatures, Mater Sci Eng A, 290, 198, 10.1016/S0921-5093(00)00958-8 ASTM Standard E112, 2012, Standard test methods for determining average grain size ASTM Standard E647, 2013, Standard test method for measurement of fatigue crack growth rates ASTM Standard E399, 2012, Standard test method for linear-elastic plane-strain fracture toughness KIC of metallic materials Paris, 1961, A rational analytic theory of fatigue, Trend Eng, 13, 9 Soboyejo, 1995, Mechanisms of fatigue crack growth in Ti–48Al at ambient and elevated temperature, Scr Metall Mater, 33, 1169, 10.1016/0956-716X(95)00343-T Kruzic, 1999, On the fatigue behavior of γ-based titanium aluminides: role of small cracks, Acta Mater, 47, 801, 10.1016/S1359-6454(98)00409-1 Choi, 2002, Effects of microstructural parameters on the fatigue crack growth of fully lamellar γ-TiAl alloys, Mater Sci Eng A, 329–331, 545, 10.1016/S0921-5093(01)01560-X Ritchie, 1988, Mechanisms of fatigue crack propagation in metals, ceramics and composites: role of crack tip shielding, Mater Sci Eng A, 103, 15, 10.1016/0025-5416(88)90547-2 Hénaff, 2005, Fatigue properties of TiAl alloys, Intermetallics, 13, 543, 10.1016/j.intermet.2004.09.007 Ritchie, 1982, Some considerations on fatigue crack closure at near-threshold stress intensities due to fracture surface morphology, Metall Trans A, 13, 937, 10.1007/BF02642409 Hénaff, 1996, Fatigue crack propagation resistance of a Ti48Al2Mn2Nb alloy in the as-cast condition, Mater Sci Eng A, 219, 212, 10.1016/S0921-5093(96)10429-9 Davidson, 1993, vol. 24 Mine, 2012, Effect of lamellar spacing on fatigue crack growth behaviour of a TiAl-based aluminide with lamellar microstructure, Mater Sci Eng A, 532, 13, 10.1016/j.msea.2011.10.055 Umakoshi, 1992, The effect of orientation and lamellar structure on the plastic behavior of TiAl crystals, Mater Sci Eng A, 152, 81, 10.1016/0921-5093(92)90050-B Van Stone, 1988, Near-threshold crack growth in nickel-base superalloys, 883 Boyce, 2001, Effect of load ratio and maximum stress intensity on the fatigue threshold in Ti–6Al–4V, Eng Fract Mech, 68, 129, 10.1016/S0013-7944(00)00099-0 Dowling, 2007 Mabru, 1997, Influence of microstructure, environment and temperature on fatigue crack propagation in TiAl alloys, 469 Ueno, 1996, Fatigue crack propagation in TiAl intermetallic compounds, 1731 Ritchie, 1973, Mechanisms of fatigue crack growth in low alloy steel, Acta Metall, 21, 639, 10.1016/0001-6160(73)90073-4 Zinsser, 1998, Effects of R-ratio on the fatigue crack growth of Nb-Si (ss) and Nb-10Si in situ composites, Metall Mater Trans A Phys Metall Mater Sci, 29, 1749, 10.1007/s11661-998-0098-x Ritchie, 1999, Mechanisms of fatigue-crack propagation in ductile and brittle solids, Int J Fract, 100, 55, 10.1023/A:1018655917051