Effects of semi-solid structure on interface formation of dissimilar aluminum to galvanized steel welds produced by load-controlled Refill Friction Stir Spot Welding

Davis, 2018 Kelly, 2015, Impacts of vehicle weight reduction via material substitution on life-cycle greenhouse gas emissions, Environ Sci Technol, 49, 12535, 10.1021/acs.est.5b03192 Keoleian, 2012, Materials challenges and opportunities for enhancing the sustainability of automobiles, MRS Bull, 37, 365, 10.1557/mrs.2012.52 Luk, 2017, Review of the fuel saving, life cycle GHG emission, and ownership cost impacts of lightweighting vehicles with different powertrains, Environ Sci Technol, 51, 8215, 10.1021/acs.est.7b00909 Lewis, 2019, Green principles for vehicle lightweighting, Environ Sci Technol, 53, 4063, 10.1021/acs.est.8b05897 Kim, 2013, Life-cycle energy and greenhouse gas emission benefits of lightweighting in automobiles: review and harmonization, Environ Sci Technol, 47, 6089, 10.1021/es3042115 Gearhart, 2016, Implications of sustainability for the United States light-duty transportation sector, MRS Energy Sustain, 3, 1, 10.1557/mre.2016.8 Adams, 1992, 2 Chen, 2017, Improvement of resistance-spot-welded joints for DP 600 steel and A5052 aluminum alloy with Zn slice interlayer, J Manuf Process, 30, 396, 10.1016/j.jmapro.2017.10.009 Atabaki, 2014, Welding of aluminum alloys to steels: an overview, J Manuf Sci Prod, 14, 59 Das, 2020, Resistance spot welding of dissimilar AISI-1008 steel/Al-1100 alloy lap joints with a graphene interlayer, J Manuf Process, 53, 260, 10.1016/j.jmapro.2020.02.032 Danyo, 2014 Kim, 2019, Challenges in riveting quality prediction: a literature survey, Procedia Manuf, 38, 1143, 10.1016/j.promfg.2020.01.203 Yang, 1999, Study on the joining strength of laser spot welding for automotive applications, J Mater Process Technol, 94, 151, 10.1016/S0924-0136(99)00094-1 Hong, 2017, Prospects of laser welding technology in the automotive industry: a review, J Mater Process Technol, 245, 46, 10.1016/j.jmatprotec.2017.02.008 Briskham, 2006, Comparison of self-pierce riveting, resistance spot welding and spot friction joining for aluminium automotive sheet, 10.4271/2006-01-0774 Campanelli, 2013, Metallurgy and mechanical performance of AZ31 magnesium alloy friction spot welds, J Mater Process Technol, 213, 515, 10.1016/j.jmatprotec.2012.11.002 Rosendo, 2011, Mechanical and microstructural investigation of friction spot welded AA6181-T4 aluminium alloy, Mater Des, 32, 1094, 10.1016/j.matdes.2010.11.017 Suhuddin, 2013, A review on microstructural and mechanical properties of friction spot welds in Al-based similar and dissimilar joints, 15 C. Schilling J. dos Santos, “Method and Device for Joining at Least Two Adjoining Work Pieces by Friction Welding,” US Pat. 6722556-B2, 2004, doi: 10.1038/incomms1464. Boldsaikhan, 2016, Refill friction stir spot joining rivet replacement technology, vol. 1, 10.4271/2016-01-2130 Suhuddin, 2017, Microstructure evolution in refill friction stir spot weld of a dissimilar Al–Mg alloy to Zn-coated steel, Sci Technol Weld Join, 22, 658, 10.1080/13621718.2017.1300744 Boldsaikhan, 2017, Refill friction stir spot joining for aerospace aluminum alloys, 237 Dong, 2016, Refilled friction stir spot welding of aluminum alloy to galvanized steel sheets, Mater Des, 107, 529, 10.1016/j.matdes.2016.07.052 Shen, 2019, Interfacial bonding mechanism in Al/coated steel dissimilar refill friction stir spot welds, J Mater Sci Technol, 35, 1027, 10.1016/j.jmst.2019.01.001 Kubaschewski, 1982, vol. 46 Springer, 2015, On the role of zinc on the formation and growth of intermetallic phases during interdiffusion between steel and aluminium alloys, Acta Mater, 96, 203, 10.1016/j.actamat.2015.06.028 Springer, 2011, On the formation and growth of intermetallic phases during interdiffusion between low-carbon steel and aluminum alloys, Acta Mater, 59, 1586, 10.1016/j.actamat.2010.11.023 Fereiduni, 2016, Dissimilar Al/steel friction stir spot welding: to penetrate into the lower steel sheet or not?, Sci Technol Weld Join, 21, 466, 10.1080/13621718.2015.1125407 Li, 2020, Interfacial microstructure and mechanical properties of dissimilar aluminum/steel joint fabricated via refilled friction stir spot welding, J Manuf Process, 49, 385, 10.1016/j.jmapro.2019.09.047 Springer, 2011, Influence of intermetallic phases and Kirkendall-porosity on the mechanical properties of joints between steel and aluminium alloys, Mater Sci Eng A, 528, 4630, 10.1016/j.msea.2011.02.057 Yılmaz, 2003, Interface properties of aluminum/steel friction-welded components, Mater Charact, 49, 421, 10.1016/S1044-5803(03)00051-2 Movahedi, 2013, Effect of annealing treatment on joint strength of aluminum/steel friction stir lap weld, Mater Des, 44, 487, 10.1016/j.matdes.2012.08.028 Lee, 2009, Dissimilar friction stir spot welding of low carbon steel and Al – Mg alloy by formation of IMCs, Sci Technol Weld Join, 14, 216, 10.1179/136217109X400439 Marder, 2000, The metallurgy of zinc-coated steel, Prog Mater Sci, 45, 191, 10.1016/S0079-6425(98)00006-1 Moreno, 2009, Characterization of galvannealed HSLA steels, Adv. Mater Res, 68, 159 Delannay, 2007, Micromechanics of room and high temperature fracture in 6xxx Al alloys, Prog Mater Sci, 52, 62, 10.1016/j.pmatsci.2006.06.001 2013 Plaine, 2017, Microstructure and mechanical behavior of friction spot welded AA6181-T4/Ti6Al4V dissimilar joints, Int J Adv Manuf Technol, 92, 3703, 10.1007/s00170-017-0439-2 Brzostek, 2018, Fatigue assessment of refill friction stir spot weld in AA 2024–T3 similar joints, Fatigue Fract Eng Mater Struct, 41, 1208, 10.1111/ffe.12764 Shen, 2018, Role of interfacial reaction on the mechanical performance of Al/steel dissimilar refill friction stir spot welds, Sci Technol Weld Join, 23, 462, 10.1080/13621718.2017.1414022 Chen, 2008, Effect of the surface state of steel on the microstructure and mechanical properties of dissimilar metal lap joints of aluminum and steel by friction stir welding, Metall Mater Trans A, 39, 1985, 10.1007/s11661-008-9523-4 Fu, 2021, Revealing joining mechanism in refill friction stir spot welding of AZ31 magnesium alloy to galvanized DP600 steel, Mater Des, 209, 10.1016/j.matdes.2021.109997 Karimi-Dermani, 2021, Dissimilar friction stir lap welding of AA7075 to AZ31B in the presence of Sn interlayer, J Manuf Process, 68, 616, 10.1016/j.jmapro.2021.05.068 Larsen, 2020, Investigating steel tool life in the RFSSW process, J Manuf Process, 58, 637, 10.1016/j.jmapro.2020.07.034 Piccini, 2017, Tool geometry optimization in friction stir spot welding of Al-steel joints, J Manuf Process, 26, 142, 10.1016/j.jmapro.2017.02.004 Zhou, 2018, Effect of pin profile on microstructure and mechanical properties of friction stir spot welded Al-Cu dissimilar metals, J Manuf Process, 36, 1, 10.1016/j.jmapro.2018.09.017 Montag, 2014, Influence of tool wear on quality criteria for refill friction stir spot welding (RFSSW) process, Procedia CIRP, 24, 108, 10.1016/j.procir.2014.08.015 Yuan, 2011, Effect of tool design and process parameters on properties of Al alloy 6016 friction stir spot welds, J Mater Process Technol, 211, 972, 10.1016/j.jmatprotec.2010.12.014 Chen, 2010, Feasibility study of short cycle time friction stir spot welding thin sheet Al to ungalvanised and galvanized steel, Mater Sci, 1 Suhuddin, 2017, Microstructure evolution in refill friction stir spot weld of a dissimilar Al–Mg alloy to Zn-coated steel, Sci Technol Weld Join, 22, 658, 10.1080/13621718.2017.1300744 Suhuddin, 2014, Microstructure and mechanical properties of friction spot welds of dissimilar AA5754 Al and AZ31 mg alloys, Mater Sci Eng A, 590, 384, 10.1016/j.msea.2013.10.057 Shen, 2014, Eutectic structures in friction spot welding joint of aluminum alloy to copper, Appl Phys Lett, 104, 2014, 10.1063/1.4876238 Pola, 2020, Review of microstructures and properties of zinc alloys, Metals, 10, 1, 10.3390/met10020253 Lemmens, 2017, Effect of silicon on the microstructure and growth kinetics of intermetallic phases formed during hot-dip aluminizing of ferritic steel, Surf Coat Technol, 319, 104, 10.1016/j.surfcoat.2017.03.040 Hu, 2021, Sensitivity of dissimilar aluminum to steel resistance spot welds to weld gun deflection, J Manuf Process, 68, 534, 10.1016/j.jmapro.2021.05.059 Shen, 2020, Material flow during refill friction stir spot welded dissimilar Al alloys using a grooved tool, J Manuf Process, 49, 260, 10.1016/j.jmapro.2019.11.029 Hu, 2006, Hybrid lases/GMA welding aluminum alloy 7075, Weld World, 50, 51, 10.1007/BF03266536 Huang, 2007, Liquation cracking in aluminum welds, Mater Sci Forum, 543, 4036, 10.4028/www.scientific.net/MSF.539-543.4036 Ola, 2015, Fusion weldability studies in aerospace AA7075-T651 using high-power continuous wave laser beam techniques, J Mater Des, 77, 50, 10.1016/j.matdes.2015.03.064 Skoko, 2009, 82, 405 Prillhofer, 2014, Property criteria for automotive Al-Mg-Si sheet alloys, Materials, 7, 5047, 10.3390/ma7075047 Hu, 2020, Comparison of the resistance spot weldability of AA5754 and AA6022 aluminum to steels, Weld J, 99, 224S, 10.29391/2020.99.021 Ding, 2017, Refill friction stir spot welding of dissimilar aluminum alloy and AlSi coated steel, J Manuf Process, 30, 353, 10.1016/j.jmapro.2017.10.006 Shen, 2013, Microstructure and failure mechanisms of refill friction stir spot welded 7075–T6 aluminum alloy joints, Mater Des, 44, 476, 10.1016/j.matdes.2012.08.026 Rosendo, 2015, Mechanical performance of AA6181 refill friction spot welds under lap shear tensile loading, Fatigue Fract Eng Mater Struct, 38, 1443, 10.1111/ffe.12312 Verma, 2021, Challenges, process requisites/inputs, mechanics and weld performance of dissimilar micro-friction stir welding (dissimilar μFSW): a comprehensive review, J Manuf Process, 68, 249, 10.1016/j.jmapro.2021.05.045 Amancio-Filho, 2011, Preliminary investigation of the microstructure and mechanical behaviour of 2024 aluminium alloy friction spot welds, Mater Trans, 52, 985, 10.2320/matertrans.L-MZ201126 Plaine, 2016, Fatigue behavior of friction spot welds in lap shear specimens of AA5754 and Ti6Al4V alloys, Int J Fatigue, 91, 149, 10.1016/j.ijfatigue.2016.06.005 Szafron, 2018, Analysis of the microstructure and selected automotive air-conditioning systems, Metals, 2 Osten, 2015, Dissolution and precipitation behaviour during continuous heating of Al-Mg-Si alloys in a wide range of heating rates, Materials, 8, 2830, 10.3390/ma8052830 Saito, 2014, The effect of Zn on precipitation in Al-Mg-Si alloys, Philos Mag, 94, 2410, 10.1080/14786435.2014.913819 Gupta, 2001, Precipitation hardening in Al–Mg–Si alloys with and without excess Si, Mater Sci Eng A, 316, 11, 10.1016/S0921-5093(01)01247-3 Li, 2018, Effects of the Mg/Si ratio on microstructure, mechanical properties, and precipitation behavior of Al–Mg–Si–1.0 wt %-Zn alloys, Materials, 11, 2591, 10.3390/ma11122591 Hu, 2021, Influencing mechanism of inherent aluminum oxide film on coach peel performance of baked Al-steel RSW, Mater Des, 197, 10.1016/j.matdes.2020.109250