Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM

Pham, 1998, A comparison of rapid prototyping technologies, Int. J. Mach. Tool. Maun., 38, 1257, 10.1016/S0890-6955(97)00137-5

Hague, 2008

Guo, 2017, Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L stainless steel by high-power direct laser deposition, J. Mater. Process. Technol., 240, 12, 10.1016/j.jmatprotec.2016.09.005

Turner, 2014, A review of melt extrusion additive manufacturing processes: I. process design and modeling, Rapid Prototyp. J., 20, 192, 10.1108/RPJ-01-2013-0012

Ahn, 2002, Anisotropic material properties of fused deposition modeling ABS, Rapid Prototyp. J., 8, 248, 10.1108/13552540210441166

Sood, 2011, Optimization of process parameters in fused deposition modeling using weighted principal component analysis, J. Adv. Manuf. Syst., 10, 241, 10.1142/S0219686711002181

Equbal, 2010, Prediction and analysis of sliding wear performance of fused deposition modelling-processed ABS plastic parts, P. I, Mech. Eng. J-J Eng., 224, 1261

Wu, 2002, Solid freeform fabrication of metal components using fused deposition of metals, Mater. Des., 23, 97, 10.1016/S0261-3069(01)00079-6

Garcia-Gonzalez, 2015, Mechanical impact behavior of polyether–ether–ketone (PEEK), Compos. Struct., 124, 88, 10.1016/j.compstruct.2014.12.061

Wu, 2015, Influence of layer thickness and raster angle on the mechanical properties of 3D-printed PEEK and a comparative mechanical study between PEEK and ABS, Materials, 8, 5834, 10.3390/ma8095271

Wu, 2018, Rubber (SEBS-g-MA) toughened flame retardant polyamide 6: microstructure, combustion, extension, and izod impact behavior,Polym, Plast. Technol., 57, 727, 10.1080/03602559.2017.1344856

Peluso, 1994, Polyetherimide as biomaterial: preliminary in vitro and in vivo biocompatibility testing, J. Mater. Sci. Mater. Med., 5, 738, 10.1007/BF00120367

Jenkins, 2001, Crystallisation in miscible blends of PEEK and PEI, Polymer, 42, 1981, 10.1016/S0032-3861(00)00438-9

Valentan, 2013, Processing poly (ether ether ketone) on a 3d printer for thermoplastic modelling, Mater. Tehnol., 47, 715

Liu, 2017, Research on precise control of 3D print nozzle temperature in PEEK material, AIP Conf. Proc., 1890

Yang, 2017, Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material, J. Mater. Process. Technol., 248, 1, 10.1016/j.jmatprotec.2017.04.027

Xiaoyong, 2017, Experimental analysis of high temperature PEEK materials on 3D printing test

Wang, 2019, Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK, J. Mater. Process. Technol., 271, 62, 10.1016/j.jmatprotec.2019.03.016

Zaldivar, 2017, Influence of processing and orientation print effects on the mechanical and thermal behavior of 3d-printed Ultem 9085 material, Addi. Manuf., 13, 71

Aboma, 2018, Investigating effects of fused-deposition modeling (FDM) processing parameters on flexural properties of Ultem 9085 using designed experiment, Materials, 11, 500, 10.3390/ma11040500

Purslow, 1981, Some fundamental aspects of composites fractography, Composites, 12, 241, 10.1016/0010-4361(81)90012-4

Bailey, 1985, Fibre pull-out phenomena in reinforced polyamides, J. Mater. Sci. Lett., 4, 843, 10.1007/BF00720518

Nguyen, 1986, Molecular analysis of the melting behaviour of poly(aryl-ether-ether-ketone), Polymer, 27, 1400, 10.1016/0032-3861(86)90041-8

Farong, 1987, The thermal stability of polyetherimide, Polym. Degrad. Stabil., 18, 247, 10.1016/0141-3910(87)90005-X