Effects of loads on corrosion-wear synergism of NiCoCrAlYTa coating in artificial seawater

Shan, 2016, Tribocorrosion behaviors of PVD CrN coated stainless steel in seawater, Wear, 362–363, 97, 10.1016/j.wear.2016.05.016 Zhang, 2016, Tribocorrosion behaviour of type S31254 steel in seawater: identification of corrosion–wear components and effect of potential, Mater. Chem Phys, 179, 273, 10.1016/j.matchemphys.2016.05.039 Totolin, 2016, Surface engineering of Ti6Al4V surfaces for enhanced tribocorrosion performance in artificial seawater, Mater. Des, 104, 10, 10.1016/j.matdes.2016.04.080 Silva, 2011, Tribocorrosion of UNS S32750 in chloride medium: effect of the load level, Electrochim Acta, 56, 8839, 10.1016/j.electacta.2011.07.077 Buciumeanu, 2016, Tribocorrosion behavior of hot pressed CoCrMo alloys in artificial saliva, Tribol Int, 97, 423, 10.1016/j.triboint.2016.02.007 Mischler, 2008, Triboelectrochemical techniques and interpretation methods in tribocorrosion: a comparative evaluation, Tribol Int, 41, 573, 10.1016/j.triboint.2007.11.003 Chen, 2016, Tribocorrosion failure mechanism of TiN/SiOx duplex coating deposited on AISI304 stainless steel, Materials, 9, 963, 10.3390/ma9120963 Chen, 2017, Tribocorrosion behaviors of CrN coating in 3.5 wt% NaCl solution, Thin Solid Films, 622, 41, 10.1016/j.tsf.2016.12.023 Peng, 2016, Fabrication of WCp/NiBSi metal matrix composite by electron beam melting, Mat Sci Eng A, 666, 320, 10.1016/j.msea.2016.04.079 Zhou, 2017, Hot corrosion behaviour of HVOF-sprayed Cr3C2-NiCrMoNbAl coating, Surf Coat Tech, 309, 849, 10.1016/j.surfcoat.2016.10.076 Hou, 2015, Effect of alumina dispersion on oxidation behavior as well as friction and wear behavior of HVOF-sprayed CoCrAlYTaCSi coating at elevated temperature up to 1000 °C, Acta Mater, 95, 164, 10.1016/j.actamat.2015.05.025 Al-Fadhli, 2006, The erosion–corrosion behaviour of high velocity oxy-fuel (HVOF) thermally sprayed inconel-625 coatings on different metallic surfaces, Surf Coat Technol, 200, 5782, 10.1016/j.surfcoat.2005.08.143 Brandolt, 2016, Corrosion behavior of nickel and cobalt coatings obtained by high-velocity oxy-fuel (HVOF) thermal spraying on API 5CT P110 steel, Mater. Corros, 67, 368, 10.1002/maco.201508505 Hong, 2013, Cavitation silt erosion behaviour of HVOF sprayed nickel based alloy coatings, Surf Eng, 29, 588, 10.1179/1743294413Y.0000000168 Tan, 2005, Solid particle erosion–corrosion behaviour of a novel HVOF nickel aluminium bronze coating for marine applications—correlation between mass loss and electrochemical measurements, Wear, 258, 629, 10.1016/j.wear.2004.02.019 Espallargas, 2010, Tribocorrosion behaviour of overlay welded Ni–Cr 625 alloy in sulphuric and nitric acids: electrochemical and chemical effects, Tribol Int, 43, 1209, 10.1016/j.triboint.2009.12.009 Zhang, 2017, Tribocorrosion behavior of 410SS in artificial seawater: effect of applied potential, Mater. Corros, 68, 295, 10.1002/maco.201609119 Wang, 2017, Effect of electrochemical corrosion on the subsurface microstructure evolution of a CoCrMo alloy in albumin containing environment, Appl Surf Sci, 406, 319, 10.1016/j.apsusc.2017.02.152 Wang, 2017, Influence of carbon contents on the structure and tribocorrosion properties of TiSiCN coatings on Ti6Al4V, Tribol Int, 109, 285, 10.1016/j.triboint.2017.01.002 Liu, 2017, Surface gradient CoCrMo alloy generated by carbon ion implantation with enhanced tribocorrosion resistance, Surf Coat Technol, 320, 590, 10.1016/j.surfcoat.2016.10.085 Gopal, 2017, Tribocorrosion and electrochemical behaviour of nanocrystalline diamond coated Ti based alloys for orthopaedic application, Tribol Int, 106, 88, 10.1016/j.triboint.2016.10.040 Jiang, 2002, Modelling the tribo-corrosion interaction in aqueous sliding conditions, Tribol Int, 35, 669, 10.1016/S0301-679X(02)00058-0 Chen, 2015, Characterization and understanding of residual stresses in a NiCoCrAlY bond coat for thermal barrier coating application, Acta Mater, 94, 1, 10.1016/j.actamat.2015.04.053 Liu, 2016, Hot corrosion behavior of NiCoCrAlYTa coating deposited on Inconel alloy substrate by high velocity oxy-fuel spraying upon exposure to molten V2O5-containing salts, Corros Sci, 112, 696, 10.1016/j.corsci.2016.09.010 Pereira, 2015, Microstructure and mechanical properties of NiCoCrAlYTa alloy processed by press and sintering route, Mater. Charact, 101, 159, 10.1016/j.matchar.2015.02.001 Pulci, 2015, High temperature oxidation of MCrAlY coatings modified by Al2O3 PVD overlay, Surf Coat Tech, 268, 198, 10.1016/j.surfcoat.2014.09.048 Tekin, 2010, Assessing the tribocorrosion performance of three different nickel-based superalloys, Tribol Lett, 37, 563, 10.1007/s11249-009-9552-1 Cakmak, 2010, Tribocorrosion of stellite 706 and tribaloy 400 superalloys, Tribol Mater. Surf Inter, 4, 8, 10.1179/175158409X459985 Liu, 2008, Influence of grain size on the corrosion behavior of a Ni-based superalloy nanocrystalline coating in NaCl acidic solution, Electrochim Acta, 53, 2453, 10.1016/j.electacta.2007.10.048 Yuan, 2015, Hot corrosion behavior of HVOF-sprayed CoNiCrAlYSi coatings in a sulphate environment, Vacuum, 122, 47, 10.1016/j.vacuum.2015.09.015 Nicholls, 1994, Hardness and modulus measurements on oxide scales, Mater. High Temp, 12, 141, 10.1080/09603409.1994.11689480 Xu, 2016, Electrochemical properties of a novel β-Ta2O5 nanoceramic coating exposed to simulated body solutions, ACS Biomater- Sci Eng, 2, 73, 10.1021/acsbiomaterials.5b00384 Fasaki, 2010, Structural, electrical and mechanical properties of NiO thin films grown by pulsed laser deposition, Appl Surf Sci, 257, 429, 10.1016/j.apsusc.2010.07.006 Ehtemam-Haghighi, 2017, Nanoindentation study of mechanical properties of Ti based alloys with Fe and Ta additions, J Alloy Compd, 692, 892, 10.1016/j.jallcom.2016.09.123 Scheriau, 2011, Deformation mechanisms of a modified 316L austenitic steel subjected to high pressure torsion, Mater. Sci Eng A, 528, 2776, 10.1016/j.msea.2010.12.023 Wei, 2017, A study on the texture evolution mechanism of nickel single crystal deformed by high pressure torsion, Mater. Sci Eng A, 684, 239, 10.1016/j.msea.2016.11.098 Villegas, 2009, Nanocrystallization process and mechanism in a nickel alloy subjected to surface severe plastic deformation, Acta Mater, 57, 5782, 10.1016/j.actamat.2009.08.005 Dosta, 2017, Plastic deformation phenomena during cold spray impact of WC-Co particles onto metal substrates, Acta Mater, 124, 173, 10.1016/j.actamat.2016.11.010 Li, 2003, In situ TEM study of stress corrosion cracking of austenitic stainless steel, Corro Sci, 45, 1355, 10.1016/S0010-938X(02)00225-1 Favero, 2006, Effect of the applied potential of te near surface microstructure of a 316L steel submitted to tribocorrosion in sulfuric acid, J Phys D Appl Phys, 39, 3175, 10.1088/0022-3727/39/15/S07 Wang, 2015, Tribocorrosion behavior of nanocrystalline metals: a review, Mater. Trans, 56, 1759, 10.2320/matertrans.M2015280 Chen, 2009, Nanocrystallization of aluminized surface of carbon steel for enhanced resistances to corrosion and corrosive wear, Electrochim Acta, 55, 118, 10.1016/j.electacta.2009.08.016 Liu, 2010, Electrochemical corrosion behavior of nanocrystalline materials — a review, J Mater. Sci Technol, 26, 1, 10.1016/S1005-0302(10)60001-1 Mischler, 1998, Wear-accelerated corrosion of passive metals in tribocorrosion systems, J Electrochem Soc, 145, 750, 10.1149/1.1838341 Adler, 1992, Corrosion and wear of 304 stainless steel using a scratch test, Corros Sci, 33, 1855, 10.1016/0010-938X(92)90189-A Zhang, 2014, Influence of microstructure evolution on tribocorrosion of 304SS in artificial seawater, Corros Sci, 88, 423, 10.1016/j.corsci.2014.07.062 Chen, 2016, Assessing the corrosion–wear behaviours of Hastelloy C276 alloy in seawater, Lubr Sci, 28, 67, 10.1002/ls.1301