Effects of injection pressure on the NOx and PM emission control of diesel engine: A review under the aspect of PCCI combustion condition

10.1016/j.enconman.2014.12.004

10.1007/978-981-13-3275-3

10.1016/j.enconman.2014.12.094

10.1016/j.fuel.2013.03.016

10.1007/s13369-014-1398-7

10.1080/15567036.2019.1663304

10.2298/TSCI1004051B

Bhiogade G. E. N. Sunheriya and J. G. Suryawanshi. 2017. Investigations on Premixed Charge Compression Ignition (PCCI) Engines: A Review. In Saha A. Das D. Srivastava R. Panigrahi P. Muralidhar K. (eds) Fluid Mechanics and Fluid Power – Contemporary Research. Lecture Notes in Mechanical Engineering. Springer New Delhi.

10.1016/j.enconman.2003.11.024

10.1021/ef900060s

Chen L. F. Yang Y. Yang X. Yang and M. Ouyang. 2009. “Application of Narrow Cone Angle Injectors to Achieve Advanced Compression Ignition on a Mass-Production Diesel Engine-Control Strategy and Engine Performance Evaluation.” SAE Technical Paper.

10.1016/j.renene.2015.08.067

10.1016/j.fuel.2017.08.023

10.1016/j.fuel.2008.05.012

Fayad, M. A. 2019. Effect of Renewable Fuel and Injection Strategies on Combustion Characteristics and Gaseous Emissions in Diesel Engines. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 42 (4):460–470. Taylor & Francis.

10.1016/j.energy.2016.10.039

10.1016/j.pecs.2017.05.002

10.1016/j.fuel.2011.11.020

Gupta, H. N. 2012. Fundamentals of Internal Combustion Engines. India: PHI Learning Pvt. Ltd.

10.1038/jes.2012.27

10.1080/15567036.2018.1487489

10.1016/S0360-1285(00)00011-3

Hiroyasu, H., and M. Arai. 1990. SAE Technical Paper Series. Journal of Engines 99:1050–61.

10.1016/j.apenergy.2018.09.022

10.1016/j.energy.2019.01.076

10.1063/5.0000133

10.1080/15567036.2018.1520342

10.18331/BRJ2019.6.1.2

10.1016/j.fuel.2019.02.009

10.1080/00102202.2018.1504292

10.1016/j.enconman.2016.09.090

10.1016/j.rser.2015.07.166

10.1016/j.enconman.2014.01.020

10.1016/j.energy.2012.09.059

10.1016/j.apenergy.2016.12.164

10.1016/j.energy.2017.01.050

10.3390/en4112049

10.1016/j.energy.2018.02.053

10.1177/1468087416650073

10.1016/j.pecs.2016.10.001

10.1016/j.applthermaleng.2011.11.011

10.1016/j.conengprac.2013.12.002

10.1016/j.rser.2016.11.159

10.3390/app9183737

10.1016/j.fuel.2014.09.011

Lucachick G. 2016. “Volatility Characterization Of Particle Emissions From Premixed Low Temperature Compression Ignition Combustion.”

10.1016/j.fuel.2018.02.172

10.1201/b17027

10.1016/j.rser.2013.08.051

10.1016/j.apenergy.2014.02.033

10.4271/2009-01-1355

10.1016/j.enconman.2016.03.002

10.2298/TSCI111211107P

10.1016/j.energy.2011.12.050

10.1289/ehp.1103639

10.1080/10473289.2006.10464485

10.1016/j.joei.2017.05.010

10.1016/j.enconman.2008.12.030

10.1016/j.fuel.2016.08.009

10.1007/s10098-014-0793-9

10.1016/j.fuel.2011.12.071

10.1016/j.fuel.2017.05.015

10.1016/j.biombioe.2012.07.016

10.1016/j.rser.2017.07.048

10.1080/15567036.2018.1520337

10.1016/j.joei.2014.11.006

10.1243/14680874JER00107

Shimazaki, N., T. Tsurushima, and T. Nishimura. 2003. Dual Mode Combustion Concept with Premixed Diesel Combustion by Direct Injection near Top Dead Center. SAE Transactions 112, Section 3: 1060–69. JSTOR.

Singh A. P. and A. K. Agarwal. 2019. Characteristics of Particulates Emitted by Ic Engines Using Advanced Combustion Strategies. In Agarwal A. Gupta J. Sharma N. Singh A. (eds) Advanced Engine Diagnostics. Energy Environment and Sustainability. Springer Singapore.

10.1021/acs.energyfuels.6b03393

10.1007/s10098-014-0874-9

10.1016/j.apenergy.2016.07.096

Wåhlin F. A. Cronhjort U. Olofsson and Å. Hans-Erik 2004. “Effect of Injection Pressure and Engine Speed on Air/fuel Mixing and Emissions in a Pre-Mixed Compression Ignited (PCI) Engine Using Diesel Fuel.” SAE Technical Paper.

10.1016/j.applthermaleng.2016.10.178

10.1080/15567036.2019.1666185

10.1016/S0140-6736(17)32464-9

10.1016/j.fuproc.2015.09.018

10.1080/15567036.2018.1548516

10.4271/2010-01-1131

10.1016/j.applthermaleng.2017.02.074

10.3390/en12203837

10.1177/1468087419859788

10.1016/j.apenergy.2017.08.137

10.1016/j.apenergy.2017.06.021

10.1016/j.fuel.2018.10.029