Effects of honing treatment on AIP-TiN and TiAlN coated end-mill for high speed machining

KE, 2009, Use of nitrogen gas in high-speed milling of Ti-6Al-4V [J], Transactions of Nonferrous Metals Society of China, 19, 530, 10.1016/S1003-6326(08)60307-6 KANG, 2005, Fractal dimension analysis of machined surface depending on coated tool wear [J], Surface and Coatings Technology, 193, 259, 10.1016/j.surfcoat.2004.07.020 Ming-sheng, 2006, Effect of partial pressure of reactive gas on chromium nitride and chromium oxide deposited by arc ion plating [J], Transactions of Nonferrous Metals Society of China, 16, s276 D'ERRICO, 1999, A study of coatings for end mills in high speed metal cutting [J], Journal of Materials Processing Technology, 92–93, 251, 10.1016/S0924-0136(99)00226-5 KWON, 2005, A comparative study on cutting performance of TiN-coated tungsten carbide cutting tool with a cobalt interlayer [J], Surface and Coatings Technology, 200, 1933, 10.1016/j.surfcoat.2005.08.121 PARKS, 1994, Rapid post-polishing of diamond-turned optics [J], Precision Engineering, 16, 223, 10.1016/0141-6359(94)90129-5 YU, 2002, Analysis of material removal in alumina ceramic honing [J], Journal of Materials Processing Technology, 129, 167, 10.1016/S0924-0136(02)00603-9 JONES, 2000, Effect of substrate preparation and deposition conditions on the preferred orientation of TiN coatings deposited by RF reactive sputtering [J], Surface and Coatings Technology, 132, 143, 10.1016/S0257-8972(00)00867-7 PINKAS, 1999, Structural analysis of (Ti1-xAlx) N graded coatings deposited by reactive magnetron sputtering [J], Thin Solid Films, 355–356, 380, 10.1016/S0040-6090(99)00667-7 EFEOGLU, 2000, Multi-pass sub-critical load testing of titanium nitride coatings [J], Thin Solid Films, 377–378, 346, 10.1016/S0040-6090(00)01309-2