Effects of electroplating on the mechanical properties of injection molded thermoplastics

www.scribd.com/doc/25213674/Part-and-Mold-Design-Guide-2005-1

Long DP, Blackburn JM, Watkins JJ (2000) Chemical fluid deposition: a hybrid technique for low temperature metallization. Adv Mater 12:913–915

De Bruyn K, Van Stappen M, De Deurwaerder H, Rouxhet L, Celis JP (2003) Study of pretreatment methods for vacuum metallization of plastics. Surf Coat Technol 163:710–715

Warshawsky A, Upson DA, Ferrar WT, Monnier JR (1989) Zerovalent metal polymer composites. III. Metallization of metal oxide surfaces with the aid of metalized functional polymer microdispersions. J Polym Sci Polym Chem 27:3015

Bruyn KD, Stappen MV, Deurwaerder HD, Rouxhet L, Celis JP (2003) Study of pretreatment methods for vacuum metallization of plastics. Surf Coat Tech 163–164:710–715

Oh KW, Kim DJ, Kim SH (2002) Improved adhesion property and electromagnetic interference shielding effectiveness of electroless Cu - plated layer on poly (ethylene terephthalate) by plasma treatment. J Appl Polym Sci 84:1369–1379

Dechasit P, Trakarnpruk W (2011) Ni electroless plating Of ABS polymer by Palladium and Tin-Free process. J Met Mater Min 21(2):19–27

Mallory GO, Hajdu JB (1990) Electroless plating: Fundamentals and applications. American Electroplaters and Surface Finishers Society, Orlando

Mandich NV, Krulik GA (1993) Plat Surf Finish 80:68

Gui-Xiang W, Ning L, Hui-Li H, Yuan-Chun Y (2006) Appl Surf Sci 253:480. doi: 10.1016/j.apsusc.2005.12.106

Choi JM et al (2010) An environment-friendly surface pretreatment of ABS plastic for electroless plating using chemical foaming agents. Trans Electr Electron Mater 11(4):174–177. doi: 10.4313/TEEM.2010.11.4.174

http://www.atotech.com/fileadmin/pdf/PoP_automotive.pdf

Domininghaus H (1998) Die Kunststoffe und ihre Eigenschaften, 5. neu bearbeitete und erweiterte Auflage, Springer

Kulkarni MV et al (2012) “Development of electroplating setup for plating ABS plastics”, i-Manager’s. J Mech Eng 2(3):52–57

Jia N et al (2004) Effects of moisture conditioning methods on mechanical properties of injection molded nylon 6. J Reinf Plast Compos 23(7):729–737