Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights
Tóm tắt
Từ khóa
Tài liệu tham khảo
Debroy, 2018, Additive manufacturing of metallic components – process, structure and properties, Prog. Mater. Sci., 92, 112, 10.1016/j.pmatsci.2017.10.001
Gu, 2012, Laser additive manufacturing of metallic components: materials, processes and mechanisms, Int. Mater. Rev., 57, 133, 10.1179/1743280411Y.0000000014
Herzog, 2016, Additive manufacturing of metals, Acta Mater., 117, 371, 10.1016/j.actamat.2016.07.019
Schmidt, 2017, Laser based additive manufacturing in industry and academia, CIRP Ann., 66, 561, 10.1016/j.cirp.2017.05.011
Yap, 2015, Review of selective laser melting: materials and applications, Appl. Phys. Rev., 2, 10.1063/1.4935926
Plessis, 2019, Beautiful and functional: a review of biomimetic design in additive manufacturing, Addit. Manuf.
Liu, 2018, Current and future trends in topology optimization for additive manufacturing, Struct. Multidiscip. Optim., 1
Bhate, 2019, 1
DebRoy, 2019, Scientific, technological and economic issues in metal printing and their solutions, Nat. Mater., 1
Wohlers, 2018
Thompson, 2017, X-ray computed tomography and additive manufacturing in medicine: a review, Int. J. Metrol. Qual. Eng., 8, 17, 10.1051/ijmqe/2017015
Lowther, 2019, Clinical, industrial, and research perspectives on powder bed fusion additively manufactured metal implants, Addit. Manuf., 28, 565
Böckin, 2019, Environmental assessment of additive manufacturing in the automotive industry, J. Clean. Prod., 226, 977, 10.1016/j.jclepro.2019.04.086
Yap, 2014, Additive manufacture of fashion and jewellery products: a mini review, Virtual Phys. Prototyp., 9, 195, 10.1080/17452759.2014.938993
Nagarajan, 2019, Development of micro selective laser melting: the state of the art and future perspectives, Engineering, 10.1016/j.eng.2019.07.002
Jafari, 2018, The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: a review, Renew. Sust. Energ. Rev., 91, 420, 10.1016/j.rser.2018.03.109
Krakhmalev, 2017, Functionalization of biomedical Ti6Al4V via in situ alloying by Cu during laser powder bed fusion manufacturing, Materials (Basel), 10, 10.3390/ma10101154
Krakhmalev, 2014, Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti–SiC powder mixtures, Intermetallics, 46, 147, 10.1016/j.intermet.2013.11.012
Yu, 2019, Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: a state of the art review, Prog. Mater. Sci., 104, 330, 10.1016/j.pmatsci.2019.04.006
Zadpoor, 2019, Mechanical performance of additively manufactured meta-biomaterials, Acta Biomater., 85, 41, 10.1016/j.actbio.2018.12.038
Van Humbeeck, 2009, Shape memory alloys
Khoo, 2018, A review of selective laser melted NiTi shape memory alloy, Materials (Basel), 11, 519, 10.3390/ma11040519
Mitchell, 2018, Additive manufacturing — a review of 4D printing and future applications, Addit. Manuf., 24, 606
De Chiffre, 2014, Industrial applications of computed tomography, CIRP Ann. - Manuf. Technol., 63, 655, 10.1016/j.cirp.2014.05.011
Vicente, 2017, The use of computed tomography to explore the microstructure of materials in civil engineering: from rocks to concrete
Kruth, 2011, Computed tomography for dimensional metrology, CIRP Ann. - Manuf. Technol., 60, 821, 10.1016/j.cirp.2011.05.006
Plessis, 2018, X-ray microcomputed tomography in additive manufacturing: a review of the current technology and applications, 3D Print. Addit. Manuf., 5
Thompson, 2016, X-ray computed tomography for additive manufacturing: a review, Meas. Sci. Technol., 27, 10.1088/0957-0233/27/7/072001
Romano, 2019, Quality control of AlSi10Mg produced by SLM: metallography versus CT scans for critical defect size assessment, Addit. Manuf., 28, 394
King, 2014, Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing, J. Mater. Process. Technol., 214, 2915, 10.1016/j.jmatprotec.2014.06.005
Khairallah, 2016, Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones, Acta Mater., 108, 36, 10.1016/j.actamat.2016.02.014
Tang, 2017, Prediction of lack-of-fusion porosity for powder bed fusion, Addit. Manuf., 14, 39
Du Plessis, 2016, Directionality of cavities and porosity formation in powder-bed laser additive manufacturing of metal components investigated using X-ray tomography, 3D Print. Addit. Manuf., 3
Gong, 2014, Analysis of defect generation in Ti-6Al-4V parts made using powder bed fusion additive manufacturing processes, Addit. Manuf., 1, 87
du Plessis, 2018, Standardized X-ray tomography testing of additively manufactured parts: a round robin test, Addit. Manuf., 24, 125
Slotwinski, 2014, Porosity measurements and analysis for metal additive manufacturing process control, J. Res. Natl. Inst. Stand. Technol., 119, 494, 10.6028/jres.119.019
Dutton, 2018
Hilaire, 2019, High-temperature mechanical properties of alloy 718 produced by laser powder bed fusion with different processing parameters, Addit. Manuf., 26, 147
Frazier, 2014, Metal additive manufacturing: a review, J. Mater. Eng. Perform., 23, 1917, 10.1007/s11665-014-0958-z
Zitelli, 2019, Laser powder bed fusion of stainless steel grades: a review, Metals (Basel), 9, 731, 10.3390/met9070731
Lewandowski, 2016, Metal additive manufacturing: a review of mechanical properties, Annu. Rev. Mater. Res., 46, 151, 10.1146/annurev-matsci-070115-032024
Morgan, 2004, Density analysis of direct metal laser re-melted 316L stainless steel cubic primitives, J. Mater. Sci., 39, 1195, 10.1023/B:JMSC.0000013875.62536.fa
Coeck, 2019, Prediction of lack of fusion porosity in selective laser melting based on melt pool monitoring data, Addit. Manuf., 25, 347
Krakhmalev, 2016, Deformation behavior and microstructure of Ti6Al4V manufactured by SLM, Phys. Procedia, 83, 778, 10.1016/j.phpro.2016.08.080
Yadroitsev, 2015, Hierarchical design principles of selective laser melting for high quality metallic objects, Addit. Manuf., 7, 45
Tammas-Williams, 2016, The effectiveness of hot isostatic pressing for closing porosity in titanium parts manufactured by selective electron beam melting, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 47, 1939, 10.1007/s11661-016-3429-3
Tammas-Williams, 2016, Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components, Scr. Mater., 122, 72, 10.1016/j.scriptamat.2016.05.002
Finfrock, 2018, Effect of hot Isostatic pressing and powder feedstock on porosity, microstructure, and mechanical properties of selective laser melted AlSi10Mg, Metallogr. Microstruct. Anal., 7, 443, 10.1007/s13632-018-0456-z
Schneller, 2019, Effect of HIP treatment on microstructure and fatigue strength of selectively laser melted AlSi10Mg, J. Manuf. Mater. Process., 3, 16
Zhou, 2018, A study of the microstructures and mechanical properties of Ti6Al4V fabricated by SLM under vacuum, Mater. Sci. Eng. A, 724, 1, 10.1016/j.msea.2018.03.021
Kelly, 2019, The effect of surface topography and porosity on the tensile fatigue of 3D printed Ti-6Al-4V fabricated by selective laser melting, Mater. Sci. Eng. C., 98, 726, 10.1016/j.msec.2019.01.024
Chen, 2019, Continuous compression behaviors of selective laser melting Ti-6Al-4V alloy with cuboctahedron cellular structures, Mater. Sci. Eng. C., 100, 781, 10.1016/j.msec.2019.03.054
Seifi, 2017, Progress towards metal additive manufacturing standardization to support qualification and certification, JOM, 69, 439, 10.1007/s11837-017-2265-2
Seifi, 2016, Overview of materials qualification needs for metal additive manufacturing, JOM, 68, 747, 10.1007/s11837-015-1810-0
Rashid, 2017, Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM), J. Mater. Process. Technol., 249, 502, 10.1016/j.jmatprotec.2017.06.023
Zikmund, 2019, Computed tomography based procedure for reproducible porosity measurement of additive manufactured samples, NDT E Int, 103, 111, 10.1016/j.ndteint.2019.02.008
ASTM International, 2012, 1
Yadroitsev, 2018, Qualification of Ti6Al4V ELI alloy produced by laser powder bed fusion for biomedical applications, JOM, 70, 372, 10.1007/s11837-017-2655-5
van Zyl, 2016, Residual stress in Ti6Al4V objects produced by direct metal laser sintering, South African J. Ind. Eng., 27, 134
Yadroitsava, 2015, Residual stress in metal specimens produced by direct metal laser sintering, 10
Sun, 2016, The influence of as-built surface conditions on mechanical properties of Ti-6Al-4V additively manufactured by selective electron beam melting, JOM, 68, 791, 10.1007/s11837-015-1768-y
Plessis, 2018, Standard method for microCT-based additive manufacturing quality control 3: surface roughness, MethodsX, 5, 1111, 10.1016/j.mex.2018.09.004
Zerbst, 2017, Damage development and damage tolerance of structures manufactured by selective laser melting – a review, Procedia Struct. Integr., 7, 141, 10.1016/j.prostr.2017.11.071
Cnudde, 2013, High-resolution X-ray computed tomography in geosciences: a review of the current technology and applications, Earth-Science Rev, 123, 1, 10.1016/j.earscirev.2013.04.003
du Plessis, 2019, A review of X-ray computed tomography of concrete and asphalt construction materials, Constr. Build. Mater., 199, 637, 10.1016/j.conbuildmat.2018.12.049
Schoeman, 2016, X-ray micro-computed tomography (μCT) for non-destructive characterisation of food microstructure, Trends Food Sci. Technol., 10.1016/j.tifs.2015.10.016
du Plessis, 2019, Looking deep into nature: a review of micro-computed tomography in biomimicry, Acta Biomater., 85, 27, 10.1016/j.actbio.2018.12.014
Broeckhoven, 2018, X-ray microtomography in herpetological research: a review, Amphibia-Reptilia, 39, 377, 10.1163/15685381-20181102
Plessis, 2017, Laboratory x-ray micro-computed tomography: a user guideline for biological samples, Gigascience, 6, 42, 10.1093/gigascience/gix027
du Plessis, 2019, Advancing X-ray micro computed tomography in Africa: going far, together, Sci. African., 3, e00061, 10.1016/j.sciaf.2019.e00061
Villarraga-Gómez, 2018, Dimensional metrology with X-ray CT: a comparison with CMM measurements on internal features and compliant structures, Precis. Eng., 51, 291, 10.1016/j.precisioneng.2017.08.021
du Plessis, 2018, 5, 1102
du Plessis, 2018, MethodsX standard method for microCT-based additive manufacturing quality control 2: density measurement, MethodsX, 5, 1117, 10.1016/j.mex.2018.09.006
Plessis, 2018, Standard method for microCT-based additive manufacturing quality control 4: metal powder analysis, MethodsX, 5, 1336, 10.1016/j.mex.2018.10.021
Martin, 2019, Dynamics of pore formation during laser powder bed fusion additive manufacturing, Nat. Commun., 10, 1, 10.1038/s41467-019-10009-2
Manfredi, 2014, Additive manufacturing of Al alloys and aluminium matrix composites (AMCs)
Wysocki, 2017, Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM), J. Mater. Process. Technol., 241, 13, 10.1016/j.jmatprotec.2016.10.022
Choo, 2019, Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel, Mater. Des., 164, 10.1016/j.matdes.2018.12.006
Tammas-Williams, 2015, XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting, Mater. Charact., 102, 47, 10.1016/j.matchar.2015.02.008
Watanabe, 1997, Effect of pressure difference on the quality of titanium casting, J. Dent. Res., 76, 773, 10.1177/00220345970760031001
du Plessis, 2017, Prediction of mechanical performance of Ti6Al4V cast alloy based on microCT-based load simulation, J. Alloys Compd., 724, 267, 10.1016/j.jallcom.2017.06.320
Magland, 2012, Computationally-optimized bone mechanical modeling from high-resolution structural images, PLoS One, 7, 10.1371/journal.pone.0035525
Kantzos, 2018, Characterization of metal additive manufacturing surfaces using synchrotron X-ray CT and micromechanical modeling, Comput. Mech., 61, 575, 10.1007/s00466-017-1531-z
Arshadi, 2015, Development of an image-based multi-scale finite-element approach to predict mechanical response of asphalt mixtures, Road Mater. Pavement Des., 16, 214, 10.1080/14680629.2015.1077007
Huang, 2016, An image-based finite element approach for simulating viscoelastic response of asphalt mixture, Adv. Mater. Sci. Eng., 2016, 1
ASTM WK56649, 2018
Wilson-Heid, 2018, Characterization of the effects of internal pores on tensile properties of additively manufactured austenitic stainless steel 316L, Exp. Mech.
Kouprianoff, 2017, Non-destructive testing of the parts manufactured by direct metal laser sintering
Mishurova, 2019, New aspects about the search for the most relevant parameters optimizing SLM materials, Addit. Manuf., 25, 325
Gong, 2015, Influence of defects on mechanical properties of Ti–6Al–4 V components produced by selective laser melting and electron beam melting, Mater. Des., 86, 545, 10.1016/j.matdes.2015.07.147
Stef, 2018, Mechanism of porosity formation and influence on mechanical properties in selective laser melting of Ti-6Al-4V parts, Mater. Des., 156, 480, 10.1016/j.matdes.2018.06.049
Elambasseril, 2019, 3D characterization of defects in deep-powder-bed manufactured Ti–6Al–4V and their influence on tensile properties, Mater. Sci. Eng. A, 761, 10.1016/j.msea.2019.138031
Voisin, 2018, Defects-dictated tensile properties of selective laser melted Ti-6Al-4V, Mater. Des., 158, 113, 10.1016/j.matdes.2018.08.004
Salarian, 2020, Pore space characteristics and corresponding effect on tensile properties of Inconel 625 fabricated via laser powder bed fusion, Mater. Sci. Eng. A, 769, 10.1016/j.msea.2019.138525
Carlton, 2016, Damage evolution and failure mechanisms in additively manufactured stainless steel, Mater. Sci. Eng. A, 651, 406, 10.1016/j.msea.2015.10.073
Pei, 2019, Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 718, Mater. Sci. Eng. A, 759, 278, 10.1016/j.msea.2019.05.007
Elambasseril, 2019, 3D characterization of defects in deep-powder-bed manufactured Ti–6Al–4V and their influence on tensile properties, Mater. Sci. Eng. A, 138031, 10.1016/j.msea.2019.138031
Zerbst, 2019, Defects as a root cause of fatigue failure of metallic components. I: basic aspects, Eng. Fail. Anal., 97, 777, 10.1016/j.engfailanal.2019.01.055
Zerbst, 2019, Defects as a root cause of fatigue failure of metallic components. II: non-metallic inclusions, Eng. Fail. Anal., 1
Murakami, 2019, Defects as a root cause of fatigue failure of metallic components. III: cavities, dents, corrosion pits, scratches, Eng. Fail. Anal., 97, 759, 10.1016/j.engfailanal.2019.01.034
Murakami, 2002
Brandão, 2017, Fatigue properties of additively manufactured AlSi10Mg-surface treatment effect, Procedia Struct. Integr., 7, 58, 10.1016/j.prostr.2017.11.061
Tang, 2019, Fatigue life prediction for AlSi10Mg components produced by selective laser melting, Int. J. Fatigue, 125, 479, 10.1016/j.ijfatigue.2019.04.015
Larrosa, 2018, Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy, Theor. Appl. Fract. Mech., 98, 123, 10.1016/j.tafmec.2018.09.011
Zhao, 2018, Effect of building direction on porosity and fatigue life of selective laser melted AlSi12Mg alloy, Mater. Sci. Eng. A, 729, 76, 10.1016/j.msea.2018.05.040
Romano, 2017, Qualification of AM parts: extreme value statistics applied to tomographic measurements, Mater. Des., 131, 32, 10.1016/j.matdes.2017.05.091
Liu, 2014, The effect of manufacturing defects on the fatigue behaviour of Ti-6Al-4V specimens fabricated using selective laser melting, 1519
Malefane, 2018, Tensile and high cycle fatigue properties of annealed Ti6Al4V (ELI) specimens produced by direct metal laser sintering, South African J. Ind. Eng., 29, 299
Andreau, 2019, A competition between the contour and hatching zones on the high cycle fatigue behaviour of a 316L stainless steel: analyzed using X-ray computed tomography, Mater. Sci. Eng. A, 757, 146, 10.1016/j.msea.2019.04.101
Benedetti, 2018, Low- and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: mean stress and defect sensitivity, Int. J. Fatigue, 107, 96, 10.1016/j.ijfatigue.2017.10.021
Shrestha, 2019, Fatigue behavior of additive manufactured 316L stainless steel parts: effects of layer orientation and surface roughness, Addit. Manuf., 28, 23
Tammas-Williams, 2017, The influence of porosity on fatigue crack initiation in additively manufactured titanium components, Sci. Rep., 7, 7308, 10.1038/s41598-017-06504-5
Atkinson, 2000, Fundamental aspects of hot isostatic pressing: an overview, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 31, 2981, 10.1007/s11661-000-0078-2
Uhlmann, 2015, Additive manufacturing of titanium alloy for aircraft components, Procedia CIRP, 35, 55, 10.1016/j.procir.2015.08.061
Damon, 2018, Process dependent porosity and the influence of shot peening on porosity morphology regarding selective laser melted AlSi10Mg parts, Addit. Manuf., 20, 77
Uzan, 2018, On the effect of shot-peening on fatigue resistance of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting (AM-SLM), Addit. Manuf., 21, 458
Hackel, 2018, Laser peening: a tool for additive manufacturing post-processing, Addit. Manuf., 24, 67
Plessis, 2019, Pore closure effect of laser shock peening of additively manufactured AlSi10Mg, 3D Print. Addit. Manuf., 6
Cunningham, 2019, Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging, Science (80-.), 363, 849, 10.1126/science.aav4687
Leung, 2018, In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing, Nat. Commun., 9, 1, 10.1038/s41467-018-03734-7
Zhao, 2017, Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction, Sci. Rep., 7, 1
du Plessis, 2019, Effects of process parameters on porosity in laser powder bed fusion revealed by X-ray tomography, Addit. Manuf., 30, 100871
Sanaei, 2019, Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing, Mater. Des., 182, 10.1016/j.matdes.2019.108091
Plessis, 2016, Quality control of a laser additive manufactured medical implant by X-ray tomography, 3D Print, Addit. Manuf., 3, 175
Fieres, 2018, Predicting failure in additively manufactured parts using X-ray computed tomography and simulation, Procedia Eng, 213, 69, 10.1016/j.proeng.2018.02.008
Plessis, 2018
Foteinopoulos, 2018, On thermal modeling of additive manufacturing processes, CIRP J. Manuf. Sci. Technol., 20, 66, 10.1016/j.cirpj.2017.09.007
Peng, 2016, Part-scale model for fast prediction of thermal distortion in DMLS additive manufacturing; part 2: a quasi-static thermomechanical model, 361
Bartsch, 2019, Novel approach to optimized support structures in laser beam melting by combining process simulation with topology optimization, J. Laser Appl., 31, 10.2351/1.5096096
King, 2015, Overview of modelling and simulation of metal powder bed fusion process at Lawrence Livermore National Laboratory, Mater. Sci. Technol., 31, 957, 10.1179/1743284714Y.0000000728
Biswal, 2018, Assessment of the effect of isolated porosity defects on the fatigue performance of additive manufactured titanium alloy, Addit. Manuf., 23, 433
Plessis, 2018, Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing, Virtual Phys. Prototyp., 1
Plessis, 2018, Ti6Al4V lightweight lattice structures manufactured by laser powder bed fusion for load-bearing applications, Opt. Laser Technol.
Dallago, 2019, On the effect of geometrical imperfections and defects on the fatigue strength of cellular lattice structures additively manufactured via Selective Laser Melting, Int. J. Fatigue, 124, 348, 10.1016/j.ijfatigue.2019.03.019
Hamidi Nasab, 2019, Combined effect of surface anomalies and volumetric defects on fatigue assessment of AlSi7Mg fabricated via laser powder bed fusion, Addit. Manuf.