Effects of combined usage of GGBS and fly ash on workability and mechanical properties of alkali activated geopolymer concrete with recycled aggregate

Tai, 2017

Colangelo, 2017, Mechanical properties and durability of mortar containing fine fraction of demolition wastes produced by selective demolition in South Italy, Compos B Eng, 115, 43, 10.1016/j.compositesb.2016.10.045

Benhelal, 2013, Global strategies and potentials to curb CO2 emissions in cement industry, J Clean Prod, 51, 142, 10.1016/j.jclepro.2012.10.049

Wang, 2016, Influence of service loading and the resulting micro-cracks on chloride resistance of concrete, Construct Build Mater, 108, 56, 10.1016/j.conbuildmat.2016.01.005

Kurda, 2018, Life cycle assessment of concrete made with high volume of recycled concrete aggregates and fly ash, Resour Conserv Recycl, 139, 407, 10.1016/j.resconrec.2018.07.004

Colangelo, 2017, Thermal cycling stability of fly ash based geopolymer mortars, Compos B Eng, 129, 11, 10.1016/j.compositesb.2017.06.029

Davidovits, 1993, Geopolymer cements to minimise carbon-dioxide greenhouse-warming, CeramTrans, 37, 165

Kurda, 2017, Combined influence of recycled concrete aggregates and high contents of fly ash on concrete properties, Construct Build Mater, 157, 554, 10.1016/j.conbuildmat.2017.09.128

Görhan, 2016, The effect of curing on the properties of metakaolin and fly ash-based geopolymer paste, Compos B Eng, 97, 329, 10.1016/j.compositesb.2016.05.019

Fernández-Jiménez, 2005, Composition and microstructure of alkali activated fly ash binder: effect of the activator, Cement Concr Res, 35, 1984, 10.1016/j.cemconres.2005.03.003

Yunsheng, 2008, Impact properties of geopolymer based extrudates incorporated with fly ash and PVA short fiber, Construct Build Mater, 22, 370, 10.1016/j.conbuildmat.2006.08.006

Chindaprasirt, 2007, Workability and strength of coarse high calcium fly ash geopolymer, Cement Concr Compos, 29, 224, 10.1016/j.cemconcomp.2006.11.002

Hardjito, 2004, On the development of fly ash-based geopolymer concrete, Mater. J, 101, 467

Olivia, 2012, Properties of fly ash geopolymer concrete designed by Taguchi method, Mater Des, 36, 191, 10.1016/j.matdes.2011.10.036

Nuaklong, 2018, Properties of metakaolin-high calcium fly ash geopolymer concrete containing recycled aggregate from crushed concrete specimens, Construct Build Mater, 161, 365, 10.1016/j.conbuildmat.2017.11.152

Shaikh, 2016, Mechanical and durability properties of fly ash geopolymer concrete containing recycled coarse aggregates, Int. J. Sustain. Built Environ., 5, 277, 10.1016/j.ijsbe.2016.05.009

Zhen, 2016, Experimental study of the geopolymeric recycled aggregate concrete, J Mater Civ Eng, 28

Xie, 2015, Compressive and flexural behaviours of a new steel-fibre-reinforced recycled aggregate concrete with crumb rubber, Construct Build Mater, 79, 263, 10.1016/j.conbuildmat.2015.01.036

Arenas, 2017, Development of a fly ash-based geopolymeric concrete with construction and demolition wastes as aggregates in acoustic barriers, Construct Build Mater, 134, 433, 10.1016/j.conbuildmat.2016.12.119

Messina, 2018, Alkali activated waste fly ash as sustainable composite: influence of curing and pozzolanic admixtures on the early-age physico-mechanical properties and residual strength after exposure at elevated temperature, Compos B Eng, 132, 161, 10.1016/j.compositesb.2017.08.012

Nikolić, 2017, Immobilization of hexavalent chromium by fly ash-based geopolymers, Compos B Eng, 112, 213, 10.1016/j.compositesb.2016.12.024

Yusuf, 2014, Strength and microstructure of alkali-activated binary blended binder containing palm oil fuel ash and ground blast-furnace slag, Construct Build Mater, 52, 504, 10.1016/j.conbuildmat.2013.11.012

Puligilla, 2013, Role of slag in microstructural development and hardening of fly ash-slag geopolymer, Cement Concr Res, 43, 70, 10.1016/j.cemconres.2012.10.004

Molino, 2014, Recycling of clay sediments for geopolymer binder production. A new perspective for reservoir management in the framework of Italian legislation: the Occhito reservoir case study, Materials, 7, 5603, 10.3390/ma7085603

Ferone, 2015, Thermally treated clay sediments as geopolymer source material, Appl Clay Sci, 107, 195, 10.1016/j.clay.2015.01.027

Komnitsas, 2016, Co-valorization of marine sediments and construction & demolition wastes through alkali activation, J. Environ. Chem. Eng., 4, 4661, 10.1016/j.jece.2016.11.003

Nuaklong, 2016, Influence of recycled aggregate on fly ash geopolymer concrete properties, J Clean Prod, 112, 2300, 10.1016/j.jclepro.2015.10.109

Swanepoel, 2002, Utilisation of fly ash in a geopolymeric material, Appl Geochem, 17, 1143, 10.1016/S0883-2927(02)00005-7

Duxson, 2007, The role of inorganic polymer technology in the development of ‘green concrete’, Cement Concr Res, 37, 1590, 10.1016/j.cemconres.2007.08.018

Sofi, 2007, Engineering properties of inorganic polymer concretes (IPCs), Cement Concr Res, 37, 251, 10.1016/j.cemconres.2006.10.008

Sumajouw, 2007, Fly ash-based geopolymer concrete: study of slender reinforced columns, J Mater Sci, 42, 3124, 10.1007/s10853-006-0523-8

Robayo-Salazar, 2017, Study of synergy between a natural volcanic pozzolan and a granulated blast furnace slag in the production of geopolymeric pastes and mortars, Construct Build Mater, 157, 151, 10.1016/j.conbuildmat.2017.09.092

2010

2007

Ryu, 2013, The mechanical properties of fly ash-based geopolymer concrete with alkaline activators, Construct Build Mater, 47, 409, 10.1016/j.conbuildmat.2013.05.069

Bakharev, 2003, Resistance of alkali-activated slag concrete to acid attack, Cement Concr Res, 33, 1607, 10.1016/S0008-8846(03)00125-X

Kusbiantoro, 2013, Development of sucrose and citric acid as the natural based admixture for fly ash based geopolymer, vol. 17, 596

2016

2014, vol. 4

Xie, 2018, Experimental study on the compressive and flexural behaviour of recycled aggregate concrete modified with silica fume and fibres, Construct Build Mater, 178, 612, 10.1016/j.conbuildmat.2018.05.136

Wang, 2018, Recycled cement, Construct Build Mater, 190, 1124, 10.1016/j.conbuildmat.2018.09.181

Bouzoubaa, 2001, Self-compacting concrete incorporating high volumes of class F fly ash - preliminary results, Cement Concr Res, 31, 413, 10.1016/S0008-8846(00)00504-4

Kurda, 2017, Influence of recycled aggregates and high contents of fly ash on concrete fresh properties, Cem.Concr. Compos, 84, 198, 10.1016/j.cemconcomp.2017.09.009

Nath, 2014, Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition, Construct Build Mater, 66, 163, 10.1016/j.conbuildmat.2014.05.080

Hung, 2013, The influence of mixture variables for the alkali-activated slag concrete on the properties of concrete, Journal of Marine Science and Technology-Taiwan, 21, 229

Rafeet, 2017, Guidelines for mix proportioning of fly ash/GGBS based alkali activated concretes, Construct Build Mater, 147, 130, 10.1016/j.conbuildmat.2017.04.036

Shi, 1996, Some factors affecting early hydration of alkali-slag cements, Cement Concr Res, 26, 439, 10.1016/S0008-8846(96)85031-9

Sagoe-Crentsil, 2007, Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: Part II. High Si/Al ratio systems, J Mater Sci, 42, 3007, 10.1007/s10853-006-0818-9

Lee, 2002, The effect of ionic contaminants on the early-age properties of alkali-activated fly ash-based cements, Cement Concr Res, 32, 577, 10.1016/S0008-8846(01)00724-4

Wang, 2013, Improving performance of recycled aggregate concrete with superfine pozzolanic powders, J Cent South Univ, 20, 3715, 10.1007/s11771-013-1899-7

Xiao, 2013, Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation, Cement Concr Compos, 37, 276, 10.1016/j.cemconcomp.2013.01.006

Ma, 2018, Structural and material performance of geopolymer concrete: a review, Construct Build Mater, 186, 90, 10.1016/j.conbuildmat.2018.07.111

Yip, 2005, The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation, Cement Concr Res, 35, 1688, 10.1016/j.cemconres.2004.10.042

2003

Fernandez-Jimenez, 2006, Engineering properties of alkali-activated fly ash concrete, ACI Mater J, 103, 106

Nath, 2017, Flexural strength and elastic modulus of ambient-cured blended low-calcium fly ash geopolymer concrete, Construct Build Mater, 130, 22, 10.1016/j.conbuildmat.2016.11.034

Xie, 2018, Effects of the addition of silica fume and rubber particles on the compressive behaviour of recycled aggregate concrete with steel fibres, J Clean Prod, 197, 656, 10.1016/j.jclepro.2018.06.237

Fonseca, 2011, The influence of curing conditions on the mechanical performance of concrete made with recycled concrete waste, Cement Concr Compos, 33, 637, 10.1016/j.cemconcomp.2011.04.002

2014

Xiao, 2012, An overview of study on recycled aggregate concrete in China (1996-2011), Construct Build Mater, 31, 364, 10.1016/j.conbuildmat.2011.12.074

Poon, 2004, Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures, Cement Concr Res, 34, 2215, 10.1016/j.cemconres.2004.02.011

Dilbas, 2014, An investigation on mechanical and physical properties of recycled aggregate concrete (RAC) with and without silica fume, Construct Build Mater, 61, 50, 10.1016/j.conbuildmat.2014.02.057

Gao, 2015, Properties of alkali activated slag–fly ash blends with limestone addition, Cement Concr Compos, 59, 119, 10.1016/j.cemconcomp.2015.01.007

Bernal, 2013, Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation, Cement Concr Res, 53, 127, 10.1016/j.cemconres.2013.06.007