Effects of biofouling development on drag forces of hull coatings for ocean-going ships: a review

Germanischer Lloyd SE, “Rules for Classification and Construction. VI Additional Rules and Guidelines. Guidelines for Extended Dry-Dock Interval.” Available from: http://www.gl-group.com/infoServices/rules/pdfs/gl_vi-11-5_e.pdf . 1-12 (2013 edition)

Yebra, DM, Kiil, S, Dam-Johansen, K, “Antifouling Technology-Past, Present and Future Steps Towards Efficient and Environmentally Friendly Antifouling Coatings.” Prog. Org. Coat., 50 75–104 (2004)

MAN Diesel & Turbo, “Basic Principles of Ship Propulsion.” [cited on 2014, Feb. 12]. Available from: http://www.mandieselturbo.com/files/news/filesof5405/5510_004_02%20low.pdf . (2011)

Townsin, R, “The Ship Hull Fouling Penalty.” Biofouling, 19 9–15 (2003)

Lejars, M, Margaillan, A, Bressy, C, “Fouling Release Coatings: A Nontoxic Alternative To Biocidal Antifouling Coatings.” Chem. Rev., 112 4347–4390 (2012)

Hellio, C, Yebra, D, Advances in Marine Antifouling Coatings And Technologies. Woodhead Publishing, Cambridge, 2009

Barrett, M, “HMS Illustrious—Effects of No Anti-fouling.” Naval Architect., E128–E129 (1985)

Almeida, E, Diamantino, TC, de Sousa, O, “Marine Paints: The Particular Case of Antifouling Paints.” Prog. Org. Coat., 59 2–20 (2007)

Kiil, S, Weinell, CE, Pedersen, MS, Dam-Johansen, K, “Analysis of Self-polishing Antifouling Paints Using Rotary Experiments and Mathematical Modelling.” Ind. Eng. Chem. Res., 40 3906–3920 (2001)

Kiil, S, Dam-Johansen, K, Weinell, CE, Pedersen, MS, Codolar, SA, “Dynamic Simulations of a Self-polishing Antifouling Paint Exposed to Seawater.” J. Coat. Technol., 74 45–54 (2002)

Chambers, LD, Stokes, KR, Walsh, FC, Wood, RJ, “Modern Approaches to Marine Antifouling Coatings.” Surf. Coat. Technol., 201 3642–3652 (2006)

Thomas, J, Choi, S, Fjeldheim, R, Boudjouk, P, “Silicones Containing Pendant Biocides for Antifouling Coatings.” Biofouling, 20 227–236 (2004)

Fathom Focus, “Hull Coatings for Vessel Performance.” [cited 2014 May 14]. Available from: http://fathomshipping.com/userfiles/files/b85b16066a682bcef16114f6b63c65b2.pdf . (2013)

Monfared, H, Sharif, F, “Design Guidelines for Development of Tin-Free Antifouling Self-polishing Coatings Using Simulation.” Prog. Org. coat., 63 79–86 (2008)

Olsen, SM, Yebra, DM, “On the Use of the Term ‘Self-polishing’ for Antifouling Paints.” Prog. Org. Coat., 76 1699–1700 (2013)

Det Norske Veritas (DNV), [cited on 2014, June 3]. Available from: http://www.dnv.com/industry/maritime/publicationsanddownloads/publications/dnvcontainershipupdate/2010/2-2010/75yearsthecoatingchallenge.asp . (2010)

Kovach, BS, Swain, G, A Boat-Mounted Foil to Measure the Drag Properties of Antifouling Coatings Applied to Static Immersion Panels. Proc. Int. Symp. Seawater Drag Reduction, Newport, RI, 1998

Townsin, R, Anderson, C, “Fouling Control Using Low Surface Energy, Foul Release Technology” In: Advances in Marine Antifouling Coatings and Technologies, pp. 693–708. Woodhead Publishers, Cambridge, 2009

Karunanidhi, SV, Kumar, R, Dokos, L, “Strategic Analysis of the Global Market for Marine Coatings.” Available from: http://www.frost.com/sublib/display-report.do?intraQuery=Strategic+analysis+of+the+global+market+for+marine+coatings.+&id=M861-01-00-00-00&bdata=&x=0&y=0 . Frost & Sullivan, 1–191 (2012)

Schultz, MP, “Effects of Coating Roughness and Biofouling on Ship Resistance and Powering.” Biofouling, 23 331–341 (2007)

Schultz, MP, Swain, GW, “The Influence of Biofilms on Skin Friction Drag.” Biofouling, 15 129–139 (2000)

Amfilokhiev, W, Conn, J, “Note on the Interaction Between the Viscous and Wavemaking Component Resistances.” R. Inst. Naval Archit. Trans., 113 43–57 (1971)

Paik, JK, Frieze, PA, “Ship Structural Safety and Reliability.” Prog. Struc. Eng. Mater., 3 198–210 (2001)

Salta, M, Wharton, JA, Stoodley, P, Dennington, SP, Goodes, LR, Werwinski, S, Mart, U, Wood, RJK, Stokes, KR, “Designing Biomimetic Antifouling Surfaces.” Philos. Trans. R. Soc. A, 368 4729–4754 (2010)

U. S. Naval Institute, “Marine Fouling and its Prevention.” Woods Hole Oceanographic Institute. (1952)

King, M, “The Measurement of Ship Hull Roughness.” Wear, 83 385–397 (1982)

Parnell, KE, Kofoed-Hansen, H, “Wakes From Large High-Speed Ferries in Confined Coastal Waters: Management Approaches with Examples From New Zealand and Denmark.” Coastal Manag., 29 217–237 (2001)

Kim, W, Van, S, Kim, D, “Measurement of Flows Around Modern Commercial Ship Models.” Exp. Fluids., 31 567–578 (2001)

Shipyard Brodosplit, 2002. Equinox Voyager. Handymax Bulk Carrier. [cited on 2014, Feb. 12]. Available from: http://www.brodosplit.hr/Portals/17/Bulk.pdf .

26th ITTC, 2011. ITTC—Recommended Procedures. Freshwater and Seawater Properties. [cited on 2014, Feb. 12]. Available from: http://ittc.sname.org/CD%202011/pdf%20Procedures%202011/7.5-02-01-03.pdf .

Lackenby, H, “Resistance of Ships, with Special Reference to Skin Friction and Hull Surface Condition.” Arch. Proc. Inst. Mech. Eng., 176 981–1014 (1962)

Munk, T, Kane, D, Yebra, D, “The Effects of Corrosion and Fouling on the Performance of Ocean-Going Vessels: A Naval Architectural Perspective.” In: Advances in Marine Antifouling Coatings and Technologies, pp. 148–176 Woodhead Publishing, Cambridge, 2009

Capurro, LRA, In: Griffith, DE (ed.) Oceanography for Practicing Engineers. Barnes & Noble, Inc., New York (1970)

Padhy, CP, Sen, D, Bhaskaran, PK, “Application of Wave Model for Weather Routing of Ships in the North Indian Ocean.” Nat. Hazards., 44 373–385 (2008)

Havelock, TH, “The Pressure of Water Waves Upon a Fixed Obstacle.” Proc. R. Soc. Lond., 175 409–421 (1940)

Kinsman, B, Wind Waves: Their Generation and Propagation on the Ocean Surface. Courier Dover Publications, Mineola, NY, 1965

Mei, CC, Stiassnie, M, Yue, DKP, Theory and Applications of Ocean Surface Waves: Nonlinear Aspects. World Scientific Publishing, Singapore, 2005

Newman, J, Marine Hydrodynamics. MIT Press, Cambridge, 1977

Dobretsov, S, Abed, RMM, Voolstra, CR, “The Effect of Surface Colour on the Formation of Marine Micro and Macrofouling Communities.” Biofouling, 29 617–627 (2013)

Zargiel, KA, Swain, GW, “Static Vs Dynamic Settlement and Adhesion of Diatoms to Ship Hull Coatings.” Biofouling, 1–15 (2013)

Granville, P, “Drag-Characterization Method for Arbitrarily Rough Surfaces by Means of Rotating Disks.” J. Fluids Eng., 104 373–377 (1982)

Haslbeck, EG, Bohlander, GS, “Microbial Biofilm Effects on Drag-Lab and Field.” SNAME., 3A 1–7 (1992)

Holm, E, Schultz, M, Haslbeck, E, Talbott, W, “Field, “Evaluation of Hydrodynamic Drag on Experimental Fouling-Release Surfaces, Using Rotating Disks.” Biofouling, 20 219–226 (2004)

Loeb, G, Laster, D, Gracik, T, “The Influence of Microbial Fouling Films on Hydrodynamic Drag of Rotating Discs.” In: Costlow, JD, Tipper, RC (eds.) Marine Biodeterioration: An Interdisciplinary Study, pp. 88–94. Naval Institute Press, Annapolis, MD (1984)

Candries, M, Atlar, M, Mesbahi, E, Pazouki, K, “The Measurement of the Drag Characteristics of Tin-Free Self-polishing Co-polymers and Fouling Release Coatings Using a Rotor Apparatus.” Biofouling, 19 27–36 (2003)

Ghani, MPA, Karim, K, Milani, K, “Experimental Investigation of the Drag Characteristics of Different Ship Hull Coating with Using Rotor Apparatus.” Jurnal Mekanikal, 31 92–102 (2010)

Kawaguchi, Y, Ashida, T, Ando, H, Senda, T, “Development of Drag Reducing Antifouling Paint and Experimental Investigation on Mass Transfer Phenomenon Near the Painted Wall.” 1–10

Mirabedini, S, Pazoki, S, Esfandeh, M, Mohseni, M, Akbari, Z, “Comparison of Drag Characteristics of Self-polishing Co-polymers and Silicone Foul Release Coatings: A Study of Wettability and Surface Roughness.” Prog. Org. Coat., 57 421–429 (2006)

Weinell, CE, Olsen, KN, Christoffersen, MW, Kiil, S, “Experimental Study of Drag Resistance Using a Laboratory Scale Rotary Set-Up.” Biofouling, 19 45–51 (2003)

TNO, Provided by e-mail from Job Klinjstra, 4 July 2014.

De Jong, P, Te, GM, Kiezebrink, E, “Prediction of the Adherence, Growth and Release of Microorganisms in Production Chains.” Int. J. Food Microbiol., 74 13–25 (2002)

Childs, PRN, Rotating Flows. Butterworth-Heinemann, Oxford, 2010

Candries, M, “Drag, Boundary-Layer and Roughness Characteristics of Marine Surfaces Coated with Antifoulings.” [PhD Thesis]. Department of Marine Technology UK: University of Newcastle-Upon-Tyne. (2001)

Schultz, MP, “The Relationship Between Frictional Resistance and Roughness for Surfaces Smoothed by Sanding.” J. Fluids Eng., 124 492–499 (2002)

Hochkirch, K, Brandt, H, “Fullscale Hydrodynamic Force Measurement on the Berlin Sail–Force–Dynamometer.” 14th Chesapeake Sailing Yacht Symposium, 1–13 (1999)

Barton, A, Sargison, J, Brandner, P, Walker, G, “A Force Balance to Measure the Total Drag of Biofilms on Test Plates.” Aus. Fluid Mech. Conf., 16 819–824 (2011)

Swain, GW, Kovach, B, Touzot, A, Casse, F, Kavanagh, CJ, “Measuring the Performance of Today’s Antifouling Coatings.” J. Ship Product., 23 164–170 (2007)

Brett, TM, “Head-Loss Measurements on Hydroelectric Conduits.” J. Hydraul. Div., 106 173–190 (1980)

Leer-Andersen, M, Larsson, L, “An Experimental/Numerical Approach for Evaluating Skin Friction on Full-Scale Ships with Surface Roughness.” J. Mar. Sci. Technol., 8 26–36 (2003)

Picologlou, BF, Characklis, WG, Zelver, N, “Biofilm Growth and Hydraulic Performance.” J. Hydraul. Div., 106 733–746 (1980)

Candries, M, Atlar, M, “Experimental Investigation of the Turbulent Boundary Layer of Surfaces Coated with Marine Antifoulings.” J. Fluids Eng., 127 219–232 (2005)

Schultz, MP, “Turbulent Boundary Layers on Surfaces Covered with Filamentous Algae.” Trans. Am. Soc. Mech. Eng J. Fluids Eng., 122 357–363 (2000)

Ünal, UO, Ünal, B, Atlar, M, “Turbulent Boundary Layer Measurements Over Flat Surfaces Coated by Nanostructured Marine Antifoulings.” Exp. Fluids, 52 1431–1448 (2012)

Schultz, MP, “Frictional Resistance of Antifouling Coating Systems.” J. Fluids Eng., 126 1039–1047 (2004)

Christensen, BE, Characklis, WG, “Physical and Chemical Properties of Biofilms.” In: Biofilms, pp. 93–130, Wiley, New York, 1990

Schultz, M, Myers, A, “Comparison of Three Roughness Function Determination Methods.” Exp. Fluids, 35 372–379 (2003)

Moody, LF, “Friction Factors for Pipe Flow.” Trans. ASME, 66 671–684 (1944)

Schlichting, H, Boundary Layer Theory. McGraw-Hill, New York, 1968

Flack, KA, Schultz, MP, Rose, WB, “The Onset of Roughness Effects in the Transitionally Rough Regime.” Int. J. Heat Fluid Flow, 35 160–167 (2012)

Gadelmawla, E, Koura, M, Maksoud, T, Elewa, I, Soliman, H, “Roughness Parameters.” J. Mater. Process. Technol., 123 133–145 (2002)

Blunt, L, Jiang, X, “Advanced Techniques for Assessment Surface Topography: Development of a Basis for 3D Surface Texture Standards ‘SURFSTAND’.” Elsevier, London, 2003

Chang, W, Hirvonen, M, Grönqvist, R, “The Effects of Cut-Off Length on Surface Roughness Parameters and Their Correlation with Transition Friction.” Saf. Sci., 42 755–769 (2004)

Howell, D, Behrends, B, “A Review of Surface Roughness in Antifouling Coatings Illustrating the Importance of Cutoff Length.” Biofouling, 22 401–410 (2006)

Berglin, M, Larsson, A, Jonsson, PR, Gatenholm, P, “The Adhesion of the Barnacle, Balanus Improvisus, to Poly(dimethylsiloxane) foling-Release Coatings and Poly(methyl methacrylate) Panels: The Effect of Barnacle Size on Strength and Failure Mode.” J. Adhes. Sci. Technol., 15 1485–1502 (2001)

Thouvenin, M, Peron, J, Charreteur, C, Guerin, P, Langlois, J, Vallee-Rehel, K, “A Study of the Biocide Release from Antifouling Paints.” Prog. Org. Coat., 44 75–83 (2002)

Aldred, N, Scardino, A, Cavaco, A, de Nys, R, Clare, AS, “Attachment Strength is a Key Factor in the Selection of Surfaces by Barnacle Cyprids (Balanus amphitrite) During Settlement.” Biofouling, 26 287–299 (2010)

Scardino, AJ, Guenther, J, De Nys, R, “Attachment Point Theory Revisited: The Fouling Response to a Microtextured Matrix.” Biofouling, 24 45–53 (2008)

Scardino, AJ, De Nys, R, “Mini Review: Biomimetic Models and Bioinspired Surfaces for Fouling Control.” Biofouling, 27 73–86 (2011)

Molland, AF, The Maritime Engineering Reference Book: A Guide to Ship Design, Construction and Operation. Butterworth-Heinemann, Oxford, 2008

Grigson, C, “Drag Losses of New Ships Caused by Hull Finish.” J. Ship Res., 36 182–196 (1992)

Musker, AJ, “Universal Roughness Functions for Naturally-Occurring Surfaces.” Trans. Can. Soc. Mech. Eng., 1 1–6 (1980–1981)

Hama, FR, “Boundary-Layer Characteristics for Smooth and Rough Surfaces.” SNAME, 333–356 (1954)

Fitzsimmons, P, Ellis, J, “A Two-Parameter Roughness Analyser and Performance Software.” International Workshop on Marine Roughness and Drag. London: RINA., 4 1–13 (1990)

Andrewartha, J, Perkins, K, Sargison, J, Osborn, J, Walker, G, Henderson, A, Hallegraeff, G, “Drag Force and Surface Roughness Measurements on Freshwater Biofouled Surfaces.” Biofouling, 26 487–496 (2010)

Khor, YS, Xiao, Q, “CFD Simulations of the Effects of Fouling and Antifouling.” Ocean Eng., 38 1065–1079 (2011)

Schultz, M, Swain, G, “The Effect of Biofilms on Turbulent Boundary Layers.” J. Fluids Eng., 121 44–51 (1999)

Conn, JFC, Lackenby, H, Walker, WP, “Resistance Experiments on the Lucy Ashton.” Trans INA., 95 350–436 (1953)

Watanabe, S, Nagamatsu, N, Yokoo, K, Kawakami, Y, “The Augmentation in Frictional Resistance Due to Slime.” J. Kansai Soc. Naval Arch., 131 45–51 (1969)

Lewthwaite, J, Molland, A, Thomas, K, “An Investigation into the Variation of Ship Skin Frictional Resistance with Fouling.” Trans. RINA., 127 269–284 (1985)

Millett, J, Anderson, C, “1997, Fighting Fast Ferry Fouling.” Fast’97, Conference Papers, 1 493–495 (1997)

Malone, JA, Little, DE, “Effects of Hull Foulants and Cleaning/Coating Practices on Ship Performance and Economics.” Soc. Nav. Arch. Mar. Eng., 88 75–101 (1980)

Townsin, R, Byrne, D, “Speed, Power and Roughness: The Economics of Outer Bottom Maintenance, Speed, Power and Roughness.” R. Inst. Naval Arch., 6 459–483 (1980)

Corbett, JJ, Winebrake, PJJ, Green, E, Comer, B, “Energy and GHG Emissions Savings Analysis of Fluoropolymer Foul Release Hull Coating.” Energy and Environmental Research Associates, LLC, 2010

Schultz, M, Bendick, J, Holm, E, Hertel, W, “Economic Impact of Biofouling on a Naval Surface Ship.” Biofouling, 27 87–98 (2010)

Bohlander, J, Zealand, MBN, “Review of Options for In-water Cleaning of Ships.” New Zealand: MAF. Biosecurity, 42 1–34 (2009)