Effects of Vessel and Water Temperatures on Direct Injection in Internal Combustion Rankine Cycle Engines

Hountalas, D., Mavropoulos, G., Zannis, T.: Comparative evaluation of EGR, intake water addition and fuel-water emulsion as NOx reduction techniques for heavy duty diesel engines. SAE International Congress & Exhibition, Society of Automotive Engineers, pp. 509–510 (2007)

Miyamoto, N., Ogawa, H., Wang, J., et al.: Significant NOx reductions with direct water injection into the sub-chamber of an IDI diesel engine. In: International Congress & Exposition (1995)

Bhagat, M., Cung, K., Johnson, J., et al.: Experimental and numerical study of water spray injection at engine-relevant conditions. In: SAE 2013 World Congress & Exhibition (2013)

Netzer, C., Franken, T., Seidel, L., et al.: Numerical analysis of the impact of water injection on combustion and thermodynamics in a gasoline engine using detailed chemistry. In: WCX World Congress Experience (2018)

Miganakallu, N., Naber, J.D., Rao, S., et al.: Experimental investigation of water injection technique in gasoline direct injection engine. In: ASME 2017 Internal Combustion Engine Division Fall Technical Conference, pp. V001T03A013 (2017)

Worm, J., Naber, J., Duncan, J., et al.: Water injection as an enabler for increased efficiency at high-load in a direct injected, boosted, SI engine. SAE Int. J. Engines 10(3), 951–958 (2017)

Nicholls, J.E., Ei-Messiri, I.A., Newhali, H.K.: Inlet manifold water injection for control of nitrogen oxides: theory and experiment. SAE Trans. 78(9), 70 (1969)

Kim, J., Park, H., Bae, C., et al.: Effects of water direct injection on the torque enhancement and fuel consumption reduction of a gasoline engine under high-load conditions. Int. J. Engine Res. 17(7), 795–808 (2016)

Berni, F., Breda, S., Lugli, M., et al.: A numerical investigation on the potentials of water injection to increase knock resistance and reduce fuel consumption in highly downsized GDI engines. Energy Procedia 81, 826–835 (2015)

Iwashiro, Y., Tsurushima, T., Asaumi, Y., et al.: Fuel consumption improvement and operation range expansion in HCCI with direct water injection. Trans. Soc. Automot. Eng. Jpn. 33, 103–107 (2002)

Roumeliotis, I., Mathioudakis, K.: Evaluation of water injection effect on compressor and engine performance and operability. Appl. Energy 87(4), 1207–1216 (2010)

Taghavifar, H., Anvari, S., Parvishi, A.: Benchmarking of water injection in a hydrogen-fueled diesel engine to reduce emissions. Int. J. Hydrog. Energy 42(16), 11962–11975 (2017)

Hoppe, F., Thewes, M., Baumgarten, H., et al.: Water injection for gasoline engines: potentials, challenges, and solutions. Int. J. Engine Res. 17(1), 86–96 (2016)

Osman, A.: Feasibility study of a novel combustion cycle involving oxygen and water, SAE International (2009)

Wu, Z., Fu, L., Gao, Y., et al.: Thermal efficiency boundary analysis of an internal combustion Rankine cycle engine. Energy 94, 38–49 (2016)

Wu, Z.J., Yu, X., Fu, L.Z., et al.: A high efficiency oxyfuel internal combustion engine cycle with water direct injection for waste heat recovery. Energy 70(3), 110–120 (2014)

Kang, Z., Wu, Z.J., Zhang, Z.H., et al.: Study of the combustion characteristics of a HCCI engine coupled with oxy-fuel combustion mode. SAE Int. J. Engines 10(3), 908–916 (2017)

Bilger, R.W., Wu, Z.J.: Carbon capture for automobiles using internal combustion rankine cycle engines. J. Eng. Gas Turbines Power 131(3), 034502 (2009)

Yu, X., Wu, Z., Wang, C., et al.: Study of the combustion and emission characteristics of a quasi ICRC engine under different engine loads, SAE International (2014)

Emberson, D.R., Ihracska, B., Imran, S., et al.: Optical characterization of diesel and water emulsion fuel injection sprays using shadowgraphy. Fuel 172, 253–262 (2016)

Zhang, Z., Kang, Z., Fu, L., et al.: Experiment on spray characteristics of water injection in thermo-atmosphere. Trans. CSICE 35(5), 443–451 (2017)

Nishijima, Y., Asaumi, Y., Aoyagi, Y.: Impingement spray system with direct water injection for premixed lean diesel combustion control, SAE International (2002)

Bedford, F., Rutland, C., Dittrich, P., et al.: Effects of direct water injection on DI diesel engine combustion, SAE International (2000)

van Vuuren, N., Qin, J.: High speed video measurements with water of a planar laser illuminated heated tip urea injector spray, SAE International (2013)

Jeonghyun, P., Kyung-hwan, L., Suhan, P.: Comparison of injection and spray characteristics of water and n-heptane in a PFI injector. J. ILASS-Korea 2017, 113 (2017)

Park, S.H., Kim, H.J., Suh, H.K., et al.: Atomization and spray characteristics of bioethanol and bioethanol blended gasoline fuel injected through a direct injection gasoline injector. Int. J. Heat Fluid Flow 30(6), 1183–1192 (2009)

Aktershev, S.P., Ovchinnikov, V.V.: Modeling of the vaporization front on a heater surface. J. Eng. Thermophys. 20(1), 77–88 (2011)

Faeth, G.M., Hsiang, L.P., Wu, P.K.: Structure and breakup properties of sprays. Int. J. Multiph. Flow 21(12), 99–127 (1995)

Kang, Z., Fu, L., Deng, J., et al.: Experimental study of knock control in an internal combustion rankine cycle engine. J. Tongji Univ. (Nat. Sci.) (7), 1030–1036 (2017)