Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties

Zhang, 2010, Deformation characteristics of phase in the delta-processed Inconel 718 alloy, Mater. Charact., 61, 49, 10.1016/j.matchar.2009.10.003

Anderson, 2006, Laser-assisted machining of Inconel 718 with an economic analysis, Int. J. Mach. Tools Manuf., 46, 1879, 10.1016/j.ijmachtools.2005.11.005

Song, 2010, Microstructural and mechanical properties of friction-stir-welded and post-heat-treated Inconel 718 alloy, J. Alloy. Compd., 505, 144, 10.1016/j.jallcom.2010.06.016

Davis, 2000

Pollock, 2006, Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties, J. Propuls. Power, 22, 361, 10.2514/1.18239

Attia, 2010, Laser-assisted high-speed finish turning of superalloy Inconel 718 under dry conditions, CIRP Ann., 59, 83, 10.1016/j.cirp.2010.03.093

Costes, 2007, Tool-life and wear mechanisms of CBN tools in machining of Inconel 718, Int. J. Mach. Tools Manuf., 47, 1081, 10.1016/j.ijmachtools.2006.09.031

J.E. Blanther, Manufacture of contour relief-maps, classification cooperative G09B29/12, 1892.

C.W. Hull, Apparatus for production of three-dimensional objects by stereolithography, 1986.

Brandl, 2012, Additive manufactured AlSi10mg samples using Selective Laser Melting (SLM): microstructure, high cycle fatigue, and fracture behavior, Mater. Des., 34, S159, 10.1016/j.matdes.2011.07.067

X. Gong, X. Wang, V. Cole, Z. Jones, K. Cooper, K. Chou, Characterization of Microstructure and Mechanical Property of Inconel 718 From Selective Laser Melting, 2015, V001T02A061. 〈http://dx.doi.org/10.1115/MSEC2015-9317〉.

Chlebus, 2015, Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting, Mater. Sci. Eng.: A, 639, 647, 10.1016/j.msea.2015.05.035

Lu, 2015, Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy, Opt. Laser Technol., 75, S197, 10.1016/j.optlastec.2015.07.009

Vrancken, 2012, Heat treatment of Ti6al4v produced by Selective Laser Melting: microstructure and mechanical properties, J. Alloy. Compd., 541, S177, 10.1016/j.jallcom.2012.07.022

Amato, 2012, Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting, Acta Mater., 60, 2229, 10.1016/j.actamat.2011.12.032

Wang, 2012, The microstructure and mechanical properties of deposited-IN718 by selective laser melting, J. Alloy. Compd., 513, 518, 10.1016/j.jallcom.2011.10.107

Strano, 2013, Surface roughness analysis, modelling and prediction in selective laser melting, J. Mater. Process. Technol., 213, 589, 10.1016/j.jmatprotec.2012.11.011

Tillmann, 2017, Hot isostatic pressing of IN718 components manufactured by selective laser melting, Addit. Manuf., 13, S93

Blackwell, 2005, The mechanical and microstructural characteristics of laser-deposited IN718, J. Mater. Process. Technol., 170, 240, 10.1016/j.jmatprotec.2005.05.005

Trosch, 2016, Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting, Mater. Lett., 164, 428, 10.1016/j.matlet.2015.10.136

Hanzl, 2015, The influence of processing parameters on the mechanical properties of SLM parts, Procedia Eng., 100, S1405, 10.1016/j.proeng.2015.01.510

Gu, 2008, Processing conditions and microstructural features of porous 316l stainless steel components by DMLS, Appl. Surf. Sci., 255, 1880, 10.1016/j.apsusc.2008.06.118

Balla, 2014, Microstructure, mechanical and wear properties of laser surface melted Ti6al4v alloy, J. Mech. Behav. Biomed. Mater., 32, S335, 10.1016/j.jmbbm.2013.12.001

Turker, 2008, Effect of production parameters on the properties of IN 718 superalloy by three-dimensional printing, Mater. Charact., 59, 1728, 10.1016/j.matchar.2008.03.017

Sufiiarov, 2015, Selective Laser Melting of the Inconel 718 nickel superalloy, Appl. Mech. Mater., 698, 333, 10.4028/www.scientific.net/AMM.698.333

Gu, 2009, Effects of processing parameters on consolidation and microstructure of w-cu components by DMLS, J. Alloy. Compd., 473, 107, 10.1016/j.jallcom.2008.05.065

Simchi, 2003, Effects of laser sintering processing parameters on the microstructure and densification of iron powder, Mater. Sci. Eng.: A, 359, 119, 10.1016/S0921-5093(03)00341-1

Thijs, 2010, A study of the microstructural evolution during selective laser melting of ti6al4v, Acta Mater., 58, 3303, 10.1016/j.actamat.2010.02.004

Sadowski, 2016, Optimizing quality of additively manufactured Inconel 718 using powder bed laser melting process, Addit. Manuf., 11, S60

Jia, 2014, Selective laser melting additive manufacturing of Inconel 718 superalloy parts: densification, microstructure and properties, J. Alloy. Compd., 585, S713, 10.1016/j.jallcom.2013.09.171

Zhang, 2015, Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy, Mater. Sci. Eng.: A, 644, S32, 10.1016/j.msea.2015.06.021

Vilaro, 2012, Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy, Mater. Sci. Eng.: A, 534, S446, 10.1016/j.msea.2011.11.092

Mostafa, 2017, Structure, texture and phases in 3d printed IN718 alloy subjected to homogenization and HIP treatments, Metals, 7, 196, 10.3390/met7060196

Jambor, 2017, Phase transformations in nickel base superalloy INCONEL 718 during cyclic loading at high temperature, Prod. Eng. Arch., 15, 15, 10.30657/pea.2017.15.04

Max, 2014

Ter-Ovanessian, 2011

Donachie, 2002

M. Sundararaman, P. Mukhopadhyay, S. Banerjie, Carbide precipitation in nickel base superalloys and their effect on mechanical properties, in: Proceedings of Superalloys 718, 625, 706 and Various Derivatives, 1997, 367.

Sims, 1987

D. Keiser, H. Brown, Review of the physical metallurgy of Alloy 718.

Ni, 2017, Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing, Mater. Sci. Eng.: A, 701, 344, 10.1016/j.msea.2017.06.098

Home|Special Metals Company.