Effect of workpiece curvature on cutting forces and surface error in peripheral milling

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture - Tập 220 Số 9 - Trang 1399-1407 - 2006
V.S. Rao1, P. Venkateswara Rao1
1Mechanical Engineering Department, Indian Institute of Technology Delhi, New Delhi, India

Tóm tắt

This paper investigates cutting forces and surface error due to cutting force-induced tool deflections in peripheral milling of curved geometries. In machining workpiece geometries, where curvature varies continuously along the tool path, both cutting force and surface error vary from point to point. This is different from the case of machining straight and circular geomtries where cutting forces and surface error are both invariant along the tool path. To study the effect of curvature, first force models for feed and normal cutting forces are derived from dynamometer measured forces. These force components are used to calculate tool deflection and resulting surface error. The results of this study show that both cutting forces and surface error are influenced strongly by workpiece curvature.

Từ khóa


Tài liệu tham khảo

Martellotti M. E., 1991, Trans. ASME, 63, 677

Martellotti M. E., 1945, Trans. ASME, 67, 233

Koenigsberger F., 1960, Ann. CIRP., 197

10.1016/0020-7357(61)90041-5

Tlusty J., 1975, Ann. CIRP, 24, 21

10.1016/0020-7357(82)90016-6

10.1115/1.3187077

10.1115/1.2899673

10.1080/00207549308956860

10.1115/1.2901804

10.1115/1.2901948

10.1016/0020-7403(95)00057-7

10.1016/S0890-6955(96)00018-1

Zheng L., 1998, ASME J. Engng. Ind., 120, 252

10.1016/S0924-0136(99)00076-X

10.1016/S0020-7403(01)00020-0

10.1115/1.3185830

10.1016/S0007-8506(07)61926-X

10.1016/0890-6955(94)90024-8

10.1016/S0890-6955(02)00016-0

10.1016/S0890-6955(02)00138-4

10.1016/S0890-6955(02)00213-4

10.1016/S0890-6955(03)00027-0

10.1016/S0890-6955(03)00183-4

10.1016/j.ijmachtools.2003.12.001

10.1243/095440502320405476

10.1016/j.ijmachtools.2003.10.007

10.1016/j.ijmachtools.2004.10.004

10.1007/BF03184759

Thông tin
Thông tin xuất bản

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Tập 220 Số 9

1399-1407

Thông tin tác giả