Effect of welding sequence on residual stress and distortion in flat-bar stiffened plates

Deng, 2007, Determination of welding deformation in fillet-welded joint by means of numerical simulation and comparison with experimental results, Journal of Materials Processing Technology, 183, 219, 10.1016/j.jmatprotec.2006.10.013

Mansour, 1990, An experimental investigation of ship hull ultimate strength, Transactions of SNAME

Smith, 1977, Influence of initial deformations and residual stresses on inelastic flexural buckling of stiffened plates and shells

Gordo, 1996, Approximate assessment of the ultimate longitudinal strength of the hull girder, Journal of Ship Research, 40, 60, 10.5957/jsr.1996.40.1.60

Gordo, 1993, Approximate load shortening curves for stiffened plates under uniaxial compression. Integrity of Offshore Structures, 189

Cui, 2002, Strength of ship plates under combined loading, Marine Structures, 15, 75, 10.1016/S0951-8339(01)00009-0

Smith M. Ultimate strength assessment of naval and commercial ships. DRDC Atlantic TR 2008-059; 2008.

2000, ISSC report of special task committee VI.2, ultimate hull girder strength

ISSC. Proceedings of the seventh international ship structures congress, report by committee II.2 on nonlinear structural response, Paris; August 1979.

Dwight, 1976, Stiffened steel compression flanges – a simpler approach, The Structural Engineer, 54, 501

Dwight, 1969, The strength of thin plates in compression

Carlsen, 1978, The specification of post-welding distortion tolerance for stiffened plates in compression, The Structural Engineer, 56A, 133

Antoniou, 1980, On the maximum deflection of plating in newly built ships, Journal of Ship Research, 24, 31, 10.5957/jsr.1980.24.1.31

Kmiecik, 1995, Statistics of ship plating distortions, Marine Structures, 8, 119, 10.1016/0951-8339(94)00014-J

Michaleris, 1997, Prediction of welding distortion, Welding Journal, 76, 172

Paik, 2003

Faulkner, 1975, A review of effective plating for use in the analysis of stiffened plating in bending and compression, Journal of Ship Research, 19, 1, 10.5957/jsr.1975.19.1.1

Smith, 1988, Strength and stiffness of ships’ plating under in-plane compression and tension, Transactions RINA, 130, 277

Cronje M. Finite element modelling of shielded metal arc welding. MSc Thesis, Department of Mechanical Engineering, Stellenbosch University, Matieland South Africa; 2005.

Deng, 2008, Prediction of welding distortion and residual stress in a thin plate butt-welded joint, Computational Materials Science, 43, 353, 10.1016/j.commatsci.2007.12.006

Mahapatra, 2006, Three-dimensional finite element analysis to predict the effects of shielded metal arc welding process parameters on temperature distributions and weldment zones in butt and one-sided fillet welds, Proceedings of the IMechE Part B: Journal of Engineering Manufacture, 220, 837, 10.1243/09544054JEM371

Tall, 1964, Residual stresses in welded plates – a theoretical study, Weldi ng Journal, 43, 10s

Iwaki, 1971, Thermo-elastic analysis of orthotropic plastic by the finite element method, Journal of the Society of Naval Architects of Japan, 130, 195

Ueda, 1971, Thermal stress analysis of metals with temperature dependant mechanical properties

Ueda, 1971, Analysis of thermal elastic-plastic stress and strain during welding by finite element method, JWRI, 2, 90

Ueda, 1971, Mechanical cracking characteristics of cracking of welded joints

Fujita Y, Takeshi Y, Kitamura M, Nomoto T. Welding stresses with special reference to cracking. IIW Doc X-655-72; 1972.

Hibbitt, 1973, A numerical thermo-mechanical model for the welding and subsequent loading of a fabricated structure, Computers & Structures, 3, 1145, 10.1016/0045-7949(73)90043-6

Friedman, 1975, Thermomechanical analysis of the welding process using the finite element method, ASME Journal of Pressure Vessel Technology, 97, 206, 10.1115/1.3454296

Lindgren, 1988, Deformations and stresses in welding of shell structures, International Journal for Numerical Methods in Engineering, 25, 635, 10.1002/nme.1620250223

Karlsson, 1990, Three-dimensional finite element analysis of temperatures and stresses in a single-pass butt-welded pipe, ASME Journal of Pressure Vessel Technology, 112, 76, 10.1115/1.2928591

Näsström, 1992, Combined 3D and shell modelling of welding

Lee, 2007, Numerical analysis of residual stresses of similar or dissimilar steel weldments under superimposed tensile loads, Computational Materials Science, 40, 548, 10.1016/j.commatsci.2007.02.005

Allum, 1985, Control of fusion characteristics in pulsed current MIG welding. Part 2: Simple model of fusion characteristics, Metal Construction, 17, 314R

Goldak, 1984, A new finite element model for welding heat sources, Metallurgical Transactions B, 15B, 229

Ueda, 1971, Thermal stress analysis of metals with temperature dependent material properties, 10

Lindgren, 2001, Finite element modeling and simulation of welding part 1: increased complexity, Journal of Thermal Stresses, 24, 141, 10.1080/01495730150500442

Deng, 2009, FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects, Materials and Design, 30, 359, 10.1016/j.matdes.2008.04.052

Dow R, Hugill R, Clark J, Smith C. Evaluation of ultimate ship hull strength. In: SNAME extreme loads and response symposium, Arlington VA, October 1981.

Nagaraja Rao, 1961, Residual stresses in welded plates, Welding Journal, 40, 468s

Nagaraja Rao, 1964, Residual stresses in welded shapes, Welding Journal, 43, 295s

Dow, 1991, Testing and analysis of a 1/3-scale welded steel frigate model, 749

Paik, 2006, Some recent developments on ultimate limit state design technology for ships and offshore structures, Ships and Offshore Structures, 1, 99, 10.1533/saos.2006.0110