Effect of weld geometry and residual stresses on fatigue in butt-welded joints

International Journal of Pressure Vessels and Piping - Tập 79 Số 7 - Trang 467-482 - 2002
Tso-Liang Teng1, Chin-Ping Fung2, Peng-Hsiang Chang2
1Department of Mechanical Engineering, Da-Yeh University, 112, Shan-Jiau Rd, Da-Tsuen, Changhua 515, Taiwan, ROC
2Chung Cheng Institute of Technology, University of National Defense, Ta-Shi, Tao-Yuan 335, Taiwan, ROC

Tóm tắt

Từ khóa


Tài liệu tham khảo

Maddox, 1991

Wylde, 1980, The influence of joint dimensions in the fatigue strength of welded tubular joint, Int J Fatigue, January, 31, 10.1016/0142-1123(80)90025-0

Mattos, 1977

Yung, 1985, Analytical and graphical aids for the fatigue design of weldments, Fatigue Fract Engng Mater Struct, 8, 223, 10.1111/j.1460-2695.1985.tb00424.x

Berge, 1985, On the effect of plate thickness in fatigue of welds, Engng Fract Mech, 21, 423, 10.1016/0013-7944(85)90030-X

Yee R, Burns DJ. Thickness effect and fatigue crack development in welded joints. Proceedings of the Seventh International Conference on Offshore Mechanics and Arctic Engineering 1988, Houston, Texas. p. 447–57.

Martins Ferreira, 1989, Influence of the radius of curvature at the weld toe in the fatigue strength of fillet welded joints, Int J Fatigue, 11, 29, 10.1016/0142-1123(89)90044-3

Ohta, 1990, Evaluation of effect of plate thickness on fatigue strength of butt welded joints by a test maintaining maximum stress at yield strength, Engng Fract Mech, 37, 987, 10.1016/0013-7944(90)90022-9

Nguyen, 1995, A theoretical study of the effect of weld geometry parameters on fatigue crack propagation life, Engng Fract Mech, 51, 1, 10.1016/0013-7944(94)00241-9

David, 1997, Thickness effect on the fatigue strength of welded steel cruciforms, Int J Fatigue, 19, s311

Lawrence, 1982

Mateffy VK, Mikan JM, Abel A. Fatigue of welded joints: the effect of stress relieving. Proceedings of Ninth Australasian Conference on Mechanics of Structures and Materials, ACMSM 9. University of Sydney; 1984.

Wohlfahrt, 1986, Possibilities for the improvement of the fatigue strength of butt welded joints of high strength structural steels, Proc IMechE

Pang, 1992, Fatigue crack growth study of residual-stress effects, Int J Fatigue, 4, 153

Nguyen, 1995, The effect of residual stresses and weld geometry on the improvement of fatigue life, J Mater Process Technol, 48, 581, 10.1016/0924-0136(94)01697-Y

Nguyen, 1996, The effect of undercut and residual stresses on fatigue behaviour of misaligned butt joints, Engng Fract Mech, 55, 453, 10.1016/0013-7944(96)00024-0

Nguyen, 1996, The effect of residual stresses on fatigue of butt joints, Welding Res Suppl, 75, 55s

Nguyen, 1998, The effect of weld geometry and residual stresses on the fatigue of welded joints under combined loading, J Mater Process Technol, 77, 201, 10.1016/S0924-0136(97)00418-4

Arai, 1995, Residual stress due to welding and its effect on the assessment of cracks near the weld interface, Int J Vessels Piping, 63, 237, 10.1016/0308-0161(94)00035-H

Yamashita, 1997, Effect of residual stress on fatigue strength of small-diameter welded pipe joint, Trans ASME, 119, 428

Palmgren, 1924, Die Lebanstaver von Kugellagern, ADVL, 68, 339

Miner, 1945, Cumulative damage in fatigue, J Appl Mech, ASME, 12, A-159, 10.1115/1.4009458

Coffin, 1954, A study of effects of cyclic thermal stresses on a ductile metal, Trans Am Soc Mech Engrs, 76, 931

Manson SS. Behavior of materials under conditions of thermal stress. National Advisory Commission on Aeronautics. Report 1170. Lewis Flight Propulsion Laboratory, Cleveland; 1954.

Morrow, 1968

Manson, 1981, Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damage, Int J Fract, 17, 169, 10.1007/BF00053519

Smith, 1970, A stress–strain function for the fatigue of materials, J Mater, 5, 767

Shim, 1992, Determination of residual stresses in thick-section weldments, Welding J, September, 305s

Higashida, 1978, Strain-controlled fatigue behavior of ASTM A36 and A514 grade F steels and 5083-0 aluminum weld materials, Welding Res Suppl, November, 334s

Specification for steel, concrete and composite bridges. Code of practice for fatigue. BS 5400. British Standards Institution, London; 1980.

Standard specifications for highway bridges. 13th ed. American Association of State Highway and Transportation Officials; 1983.

Gurney, 1979